• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2008

A study of new materials that are light-weight, high in strength has become vital to the machinery of auto industries. But then, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress. And Influence of corrosive condition for corrosion fatigue crack was investigated, after immersing in 3.5%NaCl, $10%HNO_3$+3.5%HF, $6%FeCl_3$. The immersion period was performed for 365days. The compressive residual stress was imposed on the surface according to each shot velocity based on shot peening, which is the method of improving fatigue life and strength. Fatigue life shows more improvement in the shot peened material than in the un peened material in corrosion conditions. The threshold stress intensity factor range was decreased in corrosion environments over ambient. Compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation. The fatigue crack growth rate of the Shot-peened material was lower than that of the un peened material. Also m, fatigue crack growth exponent and number of cycle of the shot peened material was higher than that of the un peened material. That is concluded from effect of da/dN.

• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.775-783
• /
• 2012

The effect of thermal annealing on the in-situ growth characteristics of intermetallics (IMCs) and the mechanical strength of Cu pillar/Sn-3.5Ag microbumps are systematically investigated. The $Cu_6Sn_5$ phase formed at the Cu/solder interface right after bonding and grew with increased annealing time, while the $Cu_3Sn$ phase formed at the $Cu/Cu_6Sn_5$ interface and grew with increased annealing time. IMC growth followed a linear relationship with the square root of the annealing time due to a diffusion-controlled mechanism. The shear strength measured by the die shear test monotonically increased with annealing time. It then changed the slope with further annealing, which correlated with the change in fracture modes from ductile to brittle at a critical transition time. This is ascribed not only to the increasing thickness of brittle IMCs but also to the decreasing thickness of the solder, as there exists a critical annealing time for a fracture mode transition in our thin solder-capped Cu pillar microbump structures.

• Horticultural Science & Technology
• /
• v.16 no.2
• /
• pp.247-250
• /
• 1998

This study was carried out to investigate the effects of changes of ionic strength according to growth stage on growth and flowering of Dendranthema grandiflorum (Ramat.) Kitamura 'Seiun' grown hydroponically in perlite. The stage I, II, and III covered early vegetative growth (27-40 days after planting), latter vegetative growth (41-54 days), and reproductive growth (55-80 days), respectively. The 2 strength (1S and 2S) of nutrient solution were treated in stage I, whereas 3 strengths (1S, 1-2S, and 2S) were treated in stage II. Then, total 9 treatments in stage III were designated by 3 treatments (tap water, 1S, and 2S) for each 3 strengths in stage II. Each nutrient solution was applied 8 times per day. At vegetative growth stage (54 days after planting), stem length was highest when irrigated 8 times a day with 1S nutrient solution. Both photosynthesis and transpiration rate were higher in 1S than those in other treatments (1-2S, 2S), whereas leaf chlorophyll content was highest in 2S treatment. Ion content of plant treated with 2S was higher than other treatments. Growth (plant height, leaf area, stem length), fresh weight, and dry weight of each plant organ after flower bud formation were better in tap water treatment (1-1-0) than other 1S treatments (1-1-1, 1-1-2). Regarding the number of days to flowering, tap water treatment was the most effective. Thus, after flower bud formation supplying tap water or lower concentration of nutrient solution than those used during the vegetative growth stage was economical in saving chemical fertilizers, shortening the number of days to flowering, reducing salt accumulation in media, saving efforts of leaching, and reducing ground water contamination.

• New & Renewable Energy
• /
• v.3 no.1 s.9
• /
• pp.54-59
• /
• 2007

A sintering aid, $B_{2}O_{3}$ have been included into a $LiAlO_{2}$ electrolyte support by a tape casting method in order to reinforce mechanical strength of the support for molten carbonate fuel cells [MCFCs). Starting idea originates from the low melting point of $B_{2}O_{3}$ ($450^{\circ}C$), which can provide the low temperature consolidation of ceramic materials. The mechanical properties and the microstructure changes of the $B_{2}O_{3}$-included electrolyte support were examined by scanning electron microscope, mercury porosimetry, X-ray powder diffraction [XRD], high temperature differential scanning calorimeter and three-point bending strength measurement. The mechanical strength was clearly improved by addition of $B_{2}O_{3}$. The increase of mechanical strength results from the neck growth of a new $LiAlO_{2}$ phase between $LiAlO_{2}$ particles by the liquid phase sintering. Average pore size and porosity of the electrolyte support reinforced by addition of the sintering aid, $B_{2}O_{3}$, was $0.24{\mu}m$ and 59%, respectively which were suitable microstructure of a matrix for an application of MCFCs.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.89-96
• /
• 2000

As solder becomes small and fine, the reliability and solderability of solder joint are the critical issue in present electronic packaging industry. Besides the use of lead(Pb) containing solders for the interconnections of microelectronic subsystem assembly and packaging has enviromental problem. In this study, using Sn/Pb and Sn/Ag eutectic solder paste, in order to obtain decrease of solder joint strength with increasing aging time, initial solder joint strength and aging strength after 1000 hour aging at $100^{\circ}C$ were measured by peel test. And in order to obtain the growth of intermetallic compound(IMC) layer thickness, IMC layer thickness was measured by scanning electron microscope(SEM). As a result, solder joint strength was decreased with increasing aging time. The mean IMC layer thickness was increased linearly with the square root of aging time. The diffusion coefficient(D) of IMC layer was found to $1.29{\times}10^{-13}{\;}cm^2/s$ at using Sn/Pb solder paste, 7.56{\times}10^{-14}{\textrm}{cm}^2/s$ at using Sn/Ag solder paste.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.601-608
• /
• 2000

Steel fiber and Polymer are used widely for the reinforcement material of RC structures because of its excellence of durability, serviceability as well as mechanical properties. Polymer-Steel fibrous high strength concrete beam's input ratio are 1.0%. The shear span-to-depth ratio are 1.5, 2.8 and 3.6, compressive strength of specimens 320kg/㎠, 436kgf/㎠ and 520kgf/㎠ in 28 days. The static test was carried out to measure the ultimate load, the initial load of flexural crack and of diagonal crack, from which crack patte군 and fracture modes are earned. Also, stress-strain, load-strain and load-deflection are examined during the test cracks(shear crack, flexural crack, and diagonal tension crack), when the load values are sketched according to the growth of crack. Result are as follows; (1) The failure modes of the specimens increase in rigidity and durability in accordance with the increase of mixing steel fiber and polymer. (2) The load of initial crack was the same as the theory of shear-crack strength (3) Polymer-Steel fibrous high strength concrete beams have increased the deflection and strain at failure load, improving the brittleness of the high strength concrete. (4) In this result of study, an additional study need to make a need formular because the study is different from ACI formular and Zsutty formular.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.7-11
• /
• 2015

The present study investigates the impact shear strength of thermal aged Sn-3Ag-0.5Cu lead-free solder joints at impact speeds ranging from 0.5 m/s to 2.5 m/s. The specimens were thermal aged for 24, 100, 250 and 1000 hours at $100^{\circ}C$. The experimental results demonstrate that the shear strength of the solder joint decreases with an increase in the load speed and aging time. The shear strength of the solder joint aged averagely decreased by 43% with an increase in the strain rate. For the as-reflowed specimens, the mode II stress intensity factor ($K_{II}$) of interfacial IMC between Sn-3.0Ag-0.5Cu and a copper substrate also was found to decrease from $1.63MPa.m^{0.5}$ to $0.97MPa.m^{0.5}$ in the speed range tested here. The degradations in the shear strength and fracture toughness of the aged solder joints are mainly caused by the growth of IMC layers at the solder/substrate interface.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.665-675
• /
• 2020

The aim of this article is to investigate the relationship between insurance and economic growth at aggregate and disaggregate level for the period 1982-2018. Very few studies have been carried out in this field, with contradictory results and using an aggregate data while, according to different authors, an aggregate data might provide spurious results. The author used Ordinary Least Squares Regressions (OLS) and Granger Causality tests to explore the strength and direction of the relationship between insurance and economic growth at an aggregate level. To check the relationship at disaggregate level life insurance, marine insurance, and property insurance are regressed on trade openness and investment, respectively. Non-life insurance at an aggregate level plays a positive and significant role in promoting economic growth, but life insurance has an insignificant impact on the Pakistan economy. On the other hand, non-life insurances at a disaggregated level such as marine insurance negatively affect a vital part of economic growth, i.e., trade. At the same time, property insurance has a significant and positive role in boosting investment. Life, marine, and property insurance Granger cause economic growth, trade, and investment in a single direction. Nevertheless, is a bi-directional relationship between economic growth and non-life insurance.

• Asian Journal of Business Environment
• /
• v.9 no.2
• /
• pp.27-34
• /
• 2019

Purpose - From the advanced path of development and current situation, the development of enterprises plays a tremendous role in promoting national economic growth and raising the overall national strength. Therefore, this paper aims at examining the mutual effect between small & medium enterprises and economic growth. Research design, data, and methodology - In order to address the operating mutual effect between the small & medium enterprises and economic growth more clearly, this paper sets Alibaba Group and Hangzhou as an example. Meanwhile, the annual data from 2000 to 2017 will be employed, and an empirical analysis will be performed under the vector error correction model. Results - The findings display that the total revenue of Alibaba Group has a positive effect on economic growth in city of Hangzhou. However, the Granger Causality test implies that there is only a unidirectional causality between total revenue of Alibaba Group and economic growth in Hangzhou. More specifically, 1% increase in total revenue of Alibaba Group can result in 0.272% in economic growth of Hangzhou in the long run. Conclusions - In summary, for the long run, the local governments should promulgate a series of policies to assist the small & medium enterprises like Alibaba Group to improve the local economic growth as seen in the city of Hangzhou.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2074-2082
• /
• 2000

In this study, to investigate and to predict the crack growth behavior under variable amplitude loading, crack growth tests are conducted on 7075-T6 aluminum alloy. The loading wave forms are generated by normal random number generator. All wave forms have same average and RMS(root mean square) value, but different standard deviation, which is to vary the maximum load in each wave. The modified Forman's equation is used as crack growth equation. Using the retardation coefficient D defined in previous study, the load interaction effect is considered. The variability in crack growth process is described by the random variable Z which was obtained from crack growth tests under constant amplitude loading in previous work. From these, a statistical model is developed. The curves predicted by the proposed model well describe the crack growth behavior under variable amplitude loading and agree with experimental data. In addition, this model well predicts the variability in crack growth process under variable amplitude loading.