• Journal of Nutrition and Health
• /
• v.36 no.7
• /
• pp.684-690
• /
• 2003

This study has investigated the bioavailability of calcium in eggshell powder (ESP) for the purpose of reutilizing eggshells as the calcium source. The experiment was designed 2 ${\times}$ 2 factorial method with two sources, CaCO$_3$ and ESP, and two levels, 0.2% and 0.4% calcium. Weanling SD rats were assigned randomly to one of 4 groups and provided by one of the isocaloric, 20% casein based 4 different experimental diets for 4weeks. Deionized water was given and environment was kept from any contamination of minerals. The body weight, diet intake, feed efficiency ratio (FER), bone growth, Ca contents of bones, and apparent absorption were measured. FER (0.38 - 0.40) and kidney weight were not different among groups and the weight and length, Ca content, strength of two bones Tibia and Femur were not affected by Ca sources except Femur Ca content. Ca content of Femur was greater in ESP groups than that of CaCO$_3$ groups. The body weight gain, bone growth, the Ca contents and strength of bones were significantly greater in 0.4% calcium groups suggesting 0.2% calcium is not sufficient for the optimum growth in the growing rats. These results indicate that ESP be a proper Ca source comparable or superior to CaCO$_3$. However the apparent absorption rate of final 3 days of feeding did not support the observed results showing lower rate in ESP than CaCO$_3$ groups. Further study be needed in the absorption aspect.

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.103-106
• /
• 2004

Plantlet regeneration from the shoot apex was studied in three different genotypes of the chinese yam (Dioscorea opposita Thunb) cv. Jnagma and Danma, Dunggunma. The effects of plant growth regulators and inorganic salts concentration of the culture medium on bud induction and shoot growth were examined. The combinations of 0.2 mg/L BAP + 0.2mg/L kinetin, 0.01mg/L NAA + 0.2 mg/L kinetin and a single treatment of 0.2mg/L BAP were equally effective for bud and shoot formation from the shoot apices in the three cultivars. Auxin (2,4-D, NAA) treatment enhanced calli formation from the cultured apices. Also, the shoot apices of the cv. Dunggunma produced more callus and buds on the culture medium (MS) containing 0.05mg/L NAA and 0.5-1.0mg/L SAP. Lower salt strength of medium inhibited shoot elongation but did not have much effect on the shoot and bud induction from the shoot apices. These results will be useful to obtain disease-free plants of the Chinese yam.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.145-151
• /
• 2004

According to the development of the aircraft industry, the fatigue strength of Aluminum Alloy becomes a great important material, but it seems that we don't understand an effect on the crack growth behaviour very well. This thesis is not only studied about the five kinds of 2017-T3, 2023-T3, 5083-0, 7075-T6, 7N01-T6 among the Aluminum Alloy which are the main materials of the aircraft, but also small or large relations against the fatigue strength of them. The consequence of the research was being progressed the accordance with the order. That is, The order is 2024-T3> 2017-T3> 7N01-T6> 7075-T6> 5083-0. These inclusion came out the acceleration phenomena in the crack growth behaviour among the high ${\Delta}K$ section Nevertheless I figured out their effects were being ignored at the 2b step.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.40-51
• /
• 1986

A study has been made of the corrosion fatigue of high strength low alloy steel in 3.5% NaCl solution under tension stress for solution temperature being 25.deg. C, 55.deg. C and 85 .deg. C. The main results obtained are as follows; 1) The corrosion fatigue crack growth rate curve could be divided into the First Region, the Second Region and the Third Region. 2) The corrosion fatigue crack growth rates in the First Region and the Second Region were Arrhenius temperature-dependent in this test range. The apparent activation energies for the corrosion fatigue cack growth rate were found to be 2000cal/mol in the First Region and 3700 cal/mol in the Second Region. 3) Hematite (Fe$_{2}$O$_{3}$) as the hexahedral crystal and magnetite (Fe$_{3}$O$_{4}$) as the octahedral crystal were observed in the corrosion products on the corrosion fatigue fracture surface at 85.deg. C and the anode fusion seem to be generated in the crack tip region at high temperature. 4) The complex environment effect ratio which was defined by the ratio of fatigue crack growth rate in corrosion environment to that in air might be considered not only a criterion estimating the effect of environment quantitatively but also an important parameter in the selection of the design stress for the fail safe design. The complex environment effect was not greater than ten in this test.

• Journal of Welding and Joining
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2017

IMicrostructure evolution and tensile property in the weld heat-affected zone (HAZ) of austenitic Fe-30Mn-9Al-0.9C lightweight steels were investigated. Five alloys with different V and Nb content were prepared by vacuum induction melting and hot rolling process. The HAZ samples were simulated by a Gleeble simulator with welding condition of 300kJ/cm heat input and HAZ peak temperatures of $1150^{\circ}C$ and $1250^{\circ}C$. Microstructures of base steels and HAZ samples were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and their mechanical properties were evaluated by tensile tests. The addition of V and Nb formed fine V and/or Nb-rich carbides, and these carbides increased tensile and yield strength of base steels by grain refinement and precipitation hardening. During thermal cycle for HAZ simulation, the grain growth occurred and the ordered carbide (${\kappa}-carbide$) formed in the HAZs. The yield strength of HAZ samples (HAZ 1) simulated in $1150^{\circ}C$ peak temperature was higher as compared to the base steel due to the formation of ${\kappa}-carbide$, while the yield strength of the HAZ samples (HAZ 2) simulated in $1250^{\circ}C$ decreased as compared to HAZ 1 due to the excessive grain growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3155-3160
• /
• 2010

Nowadays, most car manufactures have tried to improve fuel efficiency and corrosion resistance of car body. Therefore, use of high strength steels and coated steel becomes more and more increased. In this study, spot weld characteristics according to lap sequence of sheets were analyzed using simulation method for three different steel sheet of car body which were EDDQ class coated steel with 0.7t, high strength steel 440R with 1.2t and advanced high strength steel DP 590 with 1.0t. Using simulation, weldability was evaluated by nugget size of welded zone according to nugget growth curve and welding current with respect to lap sequence of sheets. Contact resistance of each sheets contact point was used to analyze formation of nugget and optimal lap sequence was suggested.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.1
• /
• pp.62-67
• /
• 2001

This study was carried out to investigate the optimum composition and concentration of medium for the acclimation of the shoots derived from bioreactor culture of Scrophularia buergeriana. Rooting and growth of the shoots cultured in bioreactor for 4 weeks were better on liquid full strength MS medium while one-tenth of MS medium was good for rooting and growth of the shoots cultured in bioreactor for 6 weeks. Leaf expansion was more effective in the shoots cultured for 6 weeks on solid MS medium than in those cultured for 4 weeks. No leaf expanded in liquid medium. Vitrification rate was higher in full strength solid MS medium than in half strength MS medium. It is concluded that acclimation of the shoots is more effective on the half strength solid MS medium containing 1.2% agar.

• Archives of Pharmacal Research
• /
• v.28 no.11
• /
• pp.1311-1316
• /
• 2005

To better define the relationship between dermal regeneration and wound contraction and scar formation, the effects of epidermal growth factor (EGF) loaded in collagen sponge matrix on the fibroblast cell proliferation rate and the dermal mechanical strength were investigated. Collagen sponges with acid-soluble fraction of pig skin were prepared and incorporated with EGF at 0, 4, and 8 $\mu$g/1.7 $cm^{2}$. Dermal fibroblasts were cultured to 80$\%$ confluence using DMEM, treated with the samples submerged, and the cell viability was estimated using MTT assay. A deep, $2^{nd}$ degree- burn of diameter 1 cm was prepared on the rabbit ear and the tested dressings were applied twice during the 15-day, post burn period. The processes of re-epithelialization and dermal regeneration were investigated until the complete wound closure day and histological analysis was performed with H-E staining. EGF increased the fibroblast cell proliferation rate. The histology showed well developed, weave-like collagen bundles and fibroblasts in EGF-treated wounds while open wounds showed irregular collagen bundles and impaired fibroblast growth. The breaking strength (944.1 $\pm$ 35.6 vs. 411.5 $\pm$ 57.0 Fmax, $gmm^{-2}$) and skin resilience (11.3 $\pm$ 1.4 vs. 6.5 $\pm$ 0.6 mJ/$mm^{2}$) were significantly increased with EGF­treated wounds as compared with open wounds, suggesting that EGF enhanced the dermal matrix formation and improved the wound mechanical strength. In conclusion, EGF-improved dermal matrix formation is related with a lower wound contraction rate. The impaired dermal regeneration observed in the open wounds could contribute to the formation of wound contraction and scar tissue development. An extraneous supply of EGF in the collagen dressing on deep, $2^{nd}$ degree-burns enhanced the dermal matrix formation.

• Journal of Bio-Environment Control
• /
• v.9 no.2
• /
• pp.79-84
• /
• 2000

The growth and quality differences between common thyme(Thymus vulgaris L.) and lemon thym (Thymus$\times$citriodorus) were investigated. They were grown in a hydroponics culture system (DFT) with a nutrient solution developed by the European Vegetable R&D Center in Belgium. Nutrient solution ionic strength used were 1.2, 2.4, 4.8 and 7.2 mS.cm-1. The dry matter of two thymes were increased with increasing ionic strength, while shoot length, root length and fresh weight were decreased. Chlorophyll content was higher in lemon thyme, while vitamin C content and essential oil content were higher in common thyme. The essential oil content showed a similar trend as those of growth. The main compostion of essential oil were thymol and carvacrol in common thyme, and geraniol and $\alpha$-citral in lemon thyme. The highest content of these compounds was obtained in 1.2mS.cm-1 treatment. Consequently, the ionic strength of 1.2mS.cm-1 was suitable for the production of quality thymes.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.37-42
• /
• 2005

Most of the welding steel plate structures have complicated mechanical problems such as rolling directional characteristics and residual stresses caused by manufacturing process. For the enhancement of reliability and safety in those structures, therefore, a systematic investigation is required. SS400 steel plate used for common structures was selected and welded by FCAW butt-welding process for this study, and then it was studied experimently about characteristics of fatigue crack propagations with respect to rolling direction and welding residual stress of welded steel plates. When the angles between rolling direction and tensile loading direction in base material are increased, their ultimate strength not show a significant difference, but yielding strength are increased and elongations are decreased uniformly. It is also shown that fatigue crack growth rate can be increased from those results. When the angles between welding bead direction and loading direction in welded material are increase, fatigue crack growth rate of them are decreased and influenced uniformly according to the conditions of residual stress distribution. In these results, it is shown that the welded steel plate structures are needed to harmonize distributed welding residual stress, rolling direction and loading direction fur the improvement of safety and endurance in manufacture of their structures.