• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.4
• /
• pp.175-180
• /
• 2012

Role of Ca in grain growth behavior has been investigated in hot-rolled Al-3%Mg and Al-3%Mg-0.5%Ca wrought alloys. When annealed for 1 hr from 723 to 823 K, grain size of the Al-3%Mg alloy increased rapidly above 723 K, whereas grains were relatively stable up to 773 K for the Ca-containing alloy. Grain homogeneity of the Ca-containing alloy was better than that of the Ca-free alloy both in hot-rolled and annealed states. Calculated activation energies for grain growth were 77.6 and 85.9 kJ/mole in the range of 723 to 823 K for the alloys with 0 and 0.5%Ca, respectively. Taking SEM images and EDS results into account, enhanced thermal stability in response to Ca addition would be associated with Al4Ca compounds located along the grain boundaries, which eventually play a role in restricting grain growth at elevated temperatures.

• Plant Resources
• /
• v.6 no.2
• /
• pp.94-97
• /
• 2003

The objective of this study is to investigate morphological characteristics of seeds and effects of environmental factors such as light and temperature on the germination and seedling growth of Adenophora triphylla var. japonica, Codonopsis lanceolata, Platycodon glandiflorum, Which belongs to Campanulaceae and useful for on oriental medicine materials. Seed shape of Codonopsis lanceolata is Elliptic. Platycodon glandiflorum is Oblong. Color of seed coats varied from yellow to dark brown. Seed size of Adenophora triphylla var. japonica is 1.37mm in length, 0.69mm in width. One thousand-seed weight of Adenophora triphylla var. japonica is 258mg. Seed size of Codonopsis lanceolata is 4.45mm in length, 2.11mm in width. One thousand-seed weight of Codonopsis lanoceolata is 1,278mg. Seed size of Platycodon glandiflorum is 2.31mm in length, 1.10mm in width. One thousand-seed weight of Platycodon glandiflorum is 988mg. Optimum temperatures for seed germination and seedling growth range from 20 to $25^{\circ}C$.

• International Journal of Railway
• /
• v.5 no.2
• /
• pp.71-76
• /
• 2012

Recently, axle load, operating speed and traffic density on railroads have had a tendency to increase and thereby cause additional pressure applied on used track. These operating conditions frequently result in service failure due to wear caused by wheel-rail contact and fatigue damage under cyclic loading. Among rail defects, the transverse crack, which has been the most dangerous type of fatigue damages, is developed from the subsurface crack near the rail running face and grows perpendicular to the rail surface. Therefore, it is necessary to investigate systematically the growth behavior of transverse crack for rail steel under mixed mode. In this study, the fatigue crack growth behavior of the transverse crack in rail steel was experimentally investigated under mixed-mode variable amplitude loadings.

• Journal of Korea Foundry Society
• /
• v.37 no.4
• /
• pp.108-114
• /
• 2017

In this study, we investigated the effect of the Si content on the secondary dendrite arm spacing (SDAS) of hypoeutectic Al-Si binary alloys in the range of 4~10 wt% Si. Cooling curves were measured during the solidification of the alloy cast in a step-wise mold. We compared two kinds of solidification time: the first is the total solidification time for both dendritic and eutectic growth, and the second is the solidification time for only dendritic growth. The proportional constant in the relationship between SDAS and cooling rate was estimated, as this constant represents the stability of the cast microstructure. The proportional constant decreased with the Si contents from 4 wt% to 8 wt%, and it remains relatively uniform with up to 10 wt% of Si.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1763-1766
• /
• 2003

Algal growth studies of Chlorella strains were conducted in a batch mode with bench type experiments. Carbon dioxide fixation rates of the following green microalgae were determined: Chlorella sp. H84, Chlorella sp. A2, Chlorella sorokiniana UTEX 1230, Chlorella vulgaris, and Chlorella pyrenoidosa. C. vulgaris, among other strains of microalgae, showed the highest growth rate (1.17 optical density/5 days). Cultivating conditions for C. vulgaris that produced the highest growth rate were at concentrations of 243 ${\mu}g\;CO_2$/mL, 10 mM ammonia, and 1 mM phosphate, with an initial pH range of 7-8.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.43-46
• /
• 1998

The effect of dopant and stoichiometry on the optical properties of LiNbO3 were studies. We prepared three samples, which are undoped, MgO doped LiNbO3 and near-stoichiometric LiNbO3 dielectric constant and transmittance in UV/VIS/IR light range were measured. The results showed that the features for high [Li]/[Nb] were similar to those for low [Li]/[Nb] but with high [Mg].

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.66-67
• /
• 2006

The master sintering curve (MSC) is derived from densification data over a range of heating rates and temperatures. To improve the accuracy, several modifications were proposed: multi-phase MSC for solid state sintering with phase changes, MSC for liquid phase sintering, and MSC with consideration of grain growth. The developed MSC models were applied to several material systems such as molybdenum, stainless steels, and tungsten heavy alloys (WHA), in order to evaluate the effect of compaction pressure, phase change, grain growth, and composition on densification, to classify regions having different sintering mechanism, and to help engineer design, optimize, and monitor sintering cycles.

• Korean Journal of Food Science and Technology
• /
• v.53 no.3
• /
• pp.348-355
• /
• 2021

Bacteriophages (phages) are known determinants of kimchi microbial ecology. Lactobacillus plantarum is related to kimchi over-acidification during the late stages of kimchi fermentation. A phage infecting Lac. plantarum was isolated from kimchi and characterized. The phage population for kimchi in a market was 2.3 log particles/mL, which corresponded to 32% of the bacterial population on a log scale. The isolated phage was designated as ΦLP12116. ΦLP12116 which belonged to the Siphoviridae family and has a very narrow host range, infecting only Lac. plantarum. The phage was stable at a lactic acid concentration of 1.0% and pH 4.0 at 4℃, indicating that it could survive in kimchi. In the kimchi extract broth treated by the phage, the growth of Lac. plantarum KCCM 12116 was inhibited by 2.2 log CFU/mL compared to the growth in non-phage-treated broth. Therefore, this study suggests that the growth of Lac. plantarum, which is known as an acid-producing strain during late fermentation in kimchi, may be controlled using the phage.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.627-633
• /
• 2008

This study was conducted to estimate volume growth rates for major Quercus species distributed in Korea, and based on the data collected from the 5th National Forest Inventory. Volume growth rates were estimated by each age class for each species, and their similarity or distinction was statistically analyzed. It was also intended to compare the resulted volume growth rates with the existing growth rates, and to develope a volume growth rate estimation model for the Quercus species. Six major Quercus species were considered in this study; Quercus acutissima, Quercus aliena, Quercus serrata, Quercus variabilis, Quercus dentata, and Quercus mongolica. Based on the data collected from the 5th National Forest Inventory, the diameter growth rates and the height growth rates were estimated for each species, and then the volume growth rates were estimated with the given diameter and height growth rates. To examine the distinction between species or age classes, statistical analyses such as ANOVA and Duncan's multiple range test were applied. The results indicated that the volume growth rate was 10% in the age class II, 6% in the age class III, and lower in the subsequent classes. In addition, the volume growth rates of Quercus acutissima, Quercus aliena, and Quercus serrata were relatively high compared to those of Quercus variabilis, Quercus dentata, and Quercus mongolica. According to their growth rates, the six Quercus species were classified into two groups; high-growth-rate group and low-growth-rate group. Statistical analysis conducted to examine the difference between and within the groups showed that there is no significant difference within groups, while significant between groups. Based on the results, volume growth rate estimation model were finally developed for each group. The classification of the Quercus species suggested in this study was not the same with that of existing volume growth estimation. Thus, it is necessary to improve the existing volume growth rate or its estimation system.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.1
• /
• pp.117-129
• /
• 2017

This research was conducted to construct a tree belt around Saemangeum reclaimed land using various planting methods and to analyze initial growth amount, to provide practical data to construct tree belt of various purposes. Tree species used in tree belt construction were Pinus thunbergii and Quercus serrata, and the main planting treatment methods used were categorized by existence of windy fence, mixed planting, and un-mixed planting. Growth amount analysis was conducted using ANOVA to compare growth amounts in different experimental groups and Duncan's multiple range test. Growth amount analysis results of tree belt by planting method showed that it is most statistically plausible to install 50% porous windy fence from the direction of wind and frost, followed by planting P. thunbergii and Q. serrata in areas that require mixed tree species tree belt around Saemangeum reclaimed land. In areas where un-mixed planting tree belt is required, it was appropriate to use P. thunbergii alone without a windy fence. Lastly, if the purpose of the tree belt is limited to rapid growth, it was most ideal to plant P. thunbergii alone (without windy fence) or install 50% porous windy fence from the direction of wind and frost, followed by planting P. thunbergii and Q. serrata. This research is based on initial growth amount of tree belt and there is a need for a long-term monitoring of tree belt growth to increase tree-planting success rate in establishing tree belt according to Saemangeum internal development.