• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.123-128
• /
• 1997

The effects of heat treatment on fatigue crack growth rates (FCGRs) of Inconel 690 have been investigated in terms of carbide morphology and grain size. Cycling tests in air at room temperature have shown that FCGR in low stress intensity factor range (ΔK) region can be effectively reduced by increasing the grain boundary carbide precipitate size and grain size. Decrease in FCGR is attributed to the crack tip blunting at the precipitates of grain boundary chromium carbides.

• Journal of Distribution Science
• /
• v.14 no.2
• /
• pp.93-101
• /
• 2016

Purpose - This study aims to advance our knowledge about factors influencing technical startup performance through analysing technical startup process empirically. This study was conducted to focus on industry structure(industry growth rate, competitive intensity, and enter barriers), technology characteristics(technical excellence and wide range of technical application), and the performance in the technology-based start-ups. Specifically, analyzing moderating effect of technology-marketing strategy, this studied how moderating variables affect technical startup performance under industry structure. Research design, data, and methodology - The subject of this study was technology-based start-ups company that received technology transfer from public organization. The development of the paper model is based on the literature of the preceding research analysis in technology commercialization, performance of technology-based start-ups, and marketing strategy. This study has a construct that was defined in the previous studies, such that technology marketing strategy was defined into the two ways of being broad or narrow in strategic application. From November 3. 2015 to December 22, 220 questionnaires were distributed with targeting to start-up companies in technology-based. 188 responses were collected for empirical analysis except the missing and wrong value responses. This data were used for structural equation modeling and regression analysis. Results - The results of this study are as follows. First, as industry structure variables influencing on performance(technical, financial) of technology-based start-ups, industry growth rate, competitive intensity and enter barriers of variables were verified; high growth rate has more positive effect on performance than low growth rate, competitive low intensity has more positive effect on performance than competitive high intensity, low enter barriers have more positive effect on performance than high enter barriers. Second, as technology characteristics variables influences on the performance(technical, financial) of technology-based start-ups, technical excellence and wide range of technical application of variables were verified ; technical high-excellence has more positive effect on performance than technology low-excellence, wide range of technical application has more positive effect on performance than narrow range of technical application. We also find that technology marketing strategy(broad/narrow) in moderating factors on performance (technical, financial) is as follows. Analyzing the moderating effect depending on technology marketing strategy(broad/narrow), application of technology, and the types of technology strategy(broad/narrow) were revealed that broad marketing strategy had a more significant effect on performance of technology-based start-ups. With AMOS, the relevancy of the study model revealed higher for broad technology-marketing strategy than narrow technology marketing strategy, and the explanatory power revealed to be 6.4% higher in broad marketing strategy than narrow marketing strategy. Conclusions - This study confirmed that industry structure and technology characteristics are important factors influencing the performance of technology-based start-ups. Technology-marketing strategy affects the performance of technology-based start-ups between industry structure and technology characteristics. According to additional analysis, moderating variables and technology-marketing strategy are important factors influencing the performance of technology-based start-ups under industry structure and technology characteristics. Broad type of technology-marketing strategy has more attractive industry structure and excellent technology characteristics than narrow types of technology-marketing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.222-226
• /
• 2016

This research was carried out to investigate the germination and seedling growth characteristics of the halophyte Suaeda asparagoides under various salt concentrations, temperatures, and the presence or absence of light S. asparagoides has a non-endospermic dicotyledonous seed structure that is go stone-shaped with a dark brown color and covered by a star-shaped perianth. Germination within the temperature range $5{\sim}40^{\circ}C$ varied from 8% to 65%. The highest germination occurred at $15^{\circ}C$. In seeds exposed to salt concentrations in the range 0~400 mM, the highest germination occurred at 0 mM, and the germination progressively decreased as the salt concentration increased. When the perianth of the seed was removed, the germination increased significantly. In the presence or absence of light, germination under white light was 5~20% higher than that under darkness, which varied according to salt concentrations in the range 0~300 mM. The plant growth of S. asparagoides, evaluated by plant height, branch number, root length, fresh weight, and dry weight, was higher in the concentration range 50~100 mM, and it decreased in the other concentrations. In conclusion, the seeds of S. asparagoides showed higher germination in fresh water at low temperature of approximately $15^{\circ}C$ under light when the perianth was removed, and the plant growth was higher at salt concentrations of 50~100 mM.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.433-437
• /
• 2002

Human milk is normally contaminated with various microorganisms, which seem to produce no ill effects. A contamination of hand-expressed and pump-expressed human milk is a major concern in the collection of storage milk. In this study we compared milks collected by two methods, hand expression and suction breast pump, to quantify differences in the degree of bacterial contamination. Thirty-one samples had been manually expressed. The mean of total bacterial counts was 10,600 CFU/mL (range: 360 ∼59,200 CFU/mL) and coliform counts was 43 CFU/mL (range: 20 ∼ 1,060 CFU/mL) in these samples. Whereas in the 118 breast pump-expressed samples, the mean of total bacterial counts was 20,200 CFU/mL (range: 240 ∼ 492,000 CFU/mL) and coliform counts was 158 CFU/mL (range: 4∼10,600 CFU/mL). There was no bacterial growth when the samples were incubated for 10 days at 4$\^{C}$. We also compared total bacterial growth in colostrum and in matured human milk for 24 hr at 20$\^{C}$ and 30$\^{C}$. Although bacterial growth had not shown for 24 hr at 20$\^{C}$, but shown slight growth in colostrum and rapidly increase in matured human milk for 24 hr at 30$\^{C}$. The coliform bacteria in all samples, particulary in formula milk, had grown at 20$\^{C}$ and 30$\^{C}$.

• Journal of Sensor Science and Technology
• /
• v.31 no.3
• /
• pp.180-186
• /
• 2022

Photosynthetically active radiation flux density (PPFD) and daily light integral (DLI) values related to plant photosynthesis were obtained using the sunlight time and insolation data points in the agricultural weather sensor data for Jinan-gun, Jeollabuk-do, Korea from 2016 to 2020. The objective was to optimize the photo-environmental conditions for cultivating ginseng. The range of average monthly sunshine duration was 395.5-664.1 min, with the longest duration observed in June. The range of average annual accumulated daily insolation was 11.98-17.65 MJ·m^-2. The range of average daily external DLI calculated from the insolation and solar time data was 22.3-36.1 mol·m^-2·d^-1, and the annual cumulative DLI was 8,156-13,175 mol·m^-2·d^-1. Both the insolation and DLI values were the highest in 2016 and lowest in 2020. Based on the PPFD required for ginseng growth (111-185 µmol·m^-2·s^-1), the monthly average daily DLI and monthly cumulative DLI were 3.51-5.87 and 82-228 mol·m^-2·d^-1, respectively. The range of five-year average value for the external monthly cumulative DLI was 298-1,459 mol·m^-2·d^-1, and the monthly cumulative DLI values when a black double shading film and blue-white shading film were applied were 101-496 and 36-175 mol·m^-2·d^-1, respectively. A comparative analysis of DLI values indicated that shading was required to ginseng growth throughout the year under natural light. When the black double shading film was used, shading was required from March to October. When the blue-white shading film was applied from April to August, (i.e., the period with active ginseng growth) the appropriate DLI for ginseng growth could be continuously maintained. Regional weather differences due to climate change are gradually increasing, and even in one region, monthly and cumulative DLI values are different every year. Therefore, in order to implement a precise agricultural environment for ginseng cultivation, precise analysis and continuous research using agricultural weather sensor big data is required.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.2
• /
• pp.59-63
• /
• 2003

The protein disulfide isomerase (PDI) reaction kinetics has been studied to evaluate its effect on the monoclonal antibody (Mab) refolding and assembly which accompanies disulfide bend formation. The MAb in vitro assembly experiments showed that the assembly rate of heavy and light chains can be greatly enhanced in the presence of PDI as compared to the rate of assembly obtained by the air-oxidation. The reassembly patterns of MAb in-termediates were identical for both with and without PDI, suggesting that the PDI does not determine the MAb assembly pathway, but rather facilitates the rate of MAb assembly by promoting PDI catalyzed disulfide bond formation. The effect of growth rate on PDI activities for MAb production has also been examined by using continuous culture system. The specific MAb productivity of hybridoma cells decreased as the growth rate increased. However, PDI activities were nearly constant fur a wide range of growth rates except very high growth rate, indicating that no direct correlation between PDI activity and specific MAb productivity exists.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.1 no.1
• /
• pp.13-17
• /
• 1996

The protein disulfide isomerase(PDI) reaction kinetics has been studied to evaluate its effect on the monoclonal antibody(MAb) refolding and assembly which accompanies disulfide bond formation The MAb in vitro assembly experiments showed that the assembly rate of heavy and light chains can be greatly enhanced in the presence of PDI as compared to the rate of assembly obtained by the air-oxidation. The reassembly patterns of MAb intermediates were identical for both with and without PDI, suggesting that the PDI does not determine the MAb assembly pathway, but rather facilitates the rate of MAb assembly by promoting PDI catalyzed disulfide bond formation. The effect of growth rate on PDI activities for MAb production has also been examined by using continuous culture system. The specific MAb productivity of hybridoma cells decreased as the growth rate increased. However, PDI activities were nearly constant for a wide range of growth rates except very high growth rate, indicating that no direct correlation between PDI activity and specific MAb productivity exists.

• Management Science and Financial Engineering
• /
• v.14 no.2
• /
• pp.89-104
• /
• 2008

Growth curves including Bass, Logistic and Gompertz functions are widely used in forecasting the market demand. Nonlinear least square method is often adopted for estimating the model parameters but it is difficult to set up the starting value for each parameter. If a wrong starting point is selected, the result may lead to erroneous forecasts. This paper proposes a method of selecting starting values for model parameters in estimating some growth curves by nonlinear least square method through grid search and transformation into linear regression model. Resealing the market data using the national economic index makes it possible to figure out the range of parameters and to utilize the grid search method. Application to some real data is also included, where the performance of our method is demonstrated.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.105-112
• /
• 1992

The main purpose of this study is to derive a law of fatigue crack growth rate in the region of elastic or elasto-plastic fracture mechanics at elevated temperatures through the application of dimensional analysis. An equation of elasto-plastic fatigue crack growth rate at elevated temperatures appeared a new Arrhenius type equation containing J-integral range and absolute temperature. The elastic or elasto-plastic crack growth rate equation shows a fairly good agreement with the experimental results for Cr-Mo-V rotor steel and Hastelloy-X alloy in the comparatively wide temperature ranges.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.390-398
• /
• 1988

Effects of atmospheres and adidtives on the grain growth of TiO2 ceramics were investigated. In the range of 1300~140$0^{\circ}C$, grain growth was increased in CO2 as compared with O2 atmosphere and the grain boundary migration activation energy was lower than the diffusion activation energy of oxygen ion in TiO2. Also, in the case of addition of oxides, the grain growth was increased by oxides acting as a acceptor andinhibited by oxides acting as a donor. From the above results, when the oxygen vacancy concentration was increased, the intrinsic grain boundary mobility was increased and the pore drag force was decreased due to the rapid densification. Also it seems that the pore was migrated by the surface diffusion rather than lattice diffusion.