• Current Photovoltaic Research
• /
• v.4 no.1
• /
• pp.21-24
• /
• 2016

Chalcopyrite based (CIGS) thin films have considered to be a promising candidates for industrial applications. The growth of quality CIGS thin films without secondary phases is very important for further efficiency improvements. But, the identification of complex secondary phases present in the entire film is crucial issue due to the lack of powerful characterization tools. Even though X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and normal Raman spectroscopy provide the information about the secondary phases, they provide insufficient information because of their resolution problem and complexity in analyzation. Among the above tools, a normal Raman spectroscopy is better for analysis of secondary phases. However, Raman signal provide the information in 300 nm depth of film even the thickness of film is > $1{\mu}m$. For this reason, the information from Raman spectroscopy can't represent the properties of whole film. In this regard, the authors introduce a new way for identification of secondary phases in CIGS film using depth Raman analysis. The CIGS thin films were prepared using DC-sputtering followed by selenization process in 10 min time under $1{\times}10^{-3}torr$ pressure. As-prepared films were polished using a dimple grinder which expanded the $2{\mu}m$ thick films into about 1mm that is more than enough to resolve the depth distribution. Raman analysis indicated that the CIGS film showed different secondary phases such as, $CuIn_3Se_5$, $CuInSe_2$, InSe and CuSe, presented in different depths of the film whereas XPS gave complex information about the phases. Therefore, the present work emphasized that the Raman depth profile tool is more efficient for identification of secondary phases in CIGS thin film.

• Cartoon and Animation Studies
• /
• s.29
• /
• pp.173-207
• /
• 2012

The four-phased plot which consists of introduction, development, turn and conclusion in the long-story structure tends to be patterned and schematized. The behavior of characters is in line with the beginning of human beings and the plot of comic strips basically has four phases. It is, however, not a simple arrangement but a complex one which was developed by organizing patterns of human power, behavior and emotions. With the results from a survey with college students studying comic strips, this study aims to categorize four characters from the archetypal system by Carol Pearson, four phases of the hero's journey by Joseph Campbell, and the four phases of the plot based on Aristotle's theory, which is the frame of the comic strip structure through supporting evidence extracted from comic strips in an integrated way. In this study, the categorization is performed by simplifying and systemizing a character's life cycle, which is a factor of a story structure in complex comic strips. This study is to identify what comic strip writers express by using the metaphor in the complicated long-story structure of comic strips This study reveals that the structure of introduction, development, turn and conclusion based on the plot theory by Aristotle is the metaphor of human life and fate and that the phases of development in the archetypal system by Carol Pearson, a Jung researcher influenced by Jung's theory are the metaphor of human life and fate. Also, the theories of Joseph Campbell, who also was influenced by Jung, are the metaphor of human life and fate as they projected complex emotions of joy, anger, sorrow, and pleasure onto the archetype of heroes and used the metaphor of the hero's journey. Lastly, the theories are introduced with the approach of 'guide to screenwriters' by Christopher Vogler. Meanwhile, this metaphor is the objective and goal of this study. The comic strips selected for this study seem to have long complex stories which have characters leaving their homes, going through adventures and difficulties, meeting the world in another way, experiencing tension, competition, wars, and hardship and returning home with compensation. They grow mentally and psychologically through their journeys and finally become heroes. They express the meaning of our introspection in a narrative through plots and images of comic strips. This appears complex but the basic structure of long comic strips has four phases of plot. The life style of an extraordinary character traveling for adventures and growing in long comic strips can be divided into four phases symbolizing childhood, adolescence, adulthood, and senescence and it is a psychological growth process. The archetypes of the character can be divided into four phases and the growth process can be explained. The hero's journey symbolized by the character can be also divided into four phases. Through theories, the complex arrangement of four-phased plots in comic strips corresponds with the growth process of introduction, development, turn and conclusion through the stages of life. At the same time, this study found that the characters becoming heroes are the metaphor of introspection and that the characters' growth and life correspond with the four phases in life through long comic strips. Long stories in long comic strips written by comic strip writers show that characters go on their journeys and change their lives through hardship and difficulty by logical construction of plot and their growth processes are presented in archetypal images and they reach introspection as heroes. The readers share time and space through images in comic strips and realize that they had the same experience as the characters emotionally by being moved by the stories.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1295-1300
• /
• 2008

During the manufacturing and the service life of Au-Al wire bonded electronic packages, the ball bonds experience elevated temperatures and hence accelerated thermal diffusion reactions that promote the transformation of the Au-Al phases and the IMC growth. In this paper, the IC under high temperature storage (HTS) tests at $175^{\circ}C,\;200^{\circ}C$, and $250^{\circ}C$ are meticulously investigated. Thermal exposure resulted in the IMC growth, Kirkendall void and the crack of the Au-Al phases. The crack propagation occurs resulting in the failure of the Au-Al ball bonds. As the IC was exposed at the high temperature, decreased in the lifetime.

• Journal of Korea Foundry Society
• /
• v.26 no.1
• /
• pp.27-33
• /
• 2006

Phase evolutions involving nucleation stages together with diffusional growth have been examined in order to provide a guideline for determining rate limiting stages during phase evolutions. In multiphase materials systems in coatings, composites or multilayered structures, diffusion treatments often result in the development of metastable/intermediate phases at the reaction interfaces. The development of metastable phases during solid state interdiffusion demonstrates that the nucleation reaction can be one controlling factor. Also, the concentration gradient and the relative magnitudes of the component diffusivities provide a basis for a phase selection and the application of a kinetic bias strategy in the phase selection. For multicomponent alloy systems, the identification of the operative diffusion pathway is central to control phase formation. Experimental access to the nucleation and growth stage is discussed in thin film multi layers and bulk samples.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.19-20
• /
• 2003

Brownian-dynamics simulation on highly charged colloidal suspensions is performed by employing Tokuyama effective force recently proposed. The radial distribution function suggests that there exist three novel phases, a gas phase, a liquid droplet phase, and a face-centered cubic (FCC) crystal droplet phase, depending on the minimum values of that potential. The dynamics of droplet growth is also investigated both in liquid droplet phase and in crystal droplet phase. Thus, different types of characteristic growth stages are found.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.5.2-5.2
• /
• 2009

From 10 years ago, the development of nano-devices endeavored to achieve reconstruction of information technology (IT) and nano technology (NT) industry. Among the many materials for the IT and NT industry, zinc oxide (ZnO) is a very promising candidate material for the research of nano-device development. Nano-structures of ZnO-based materials were grown easily via various methods and it attracts huge attention because of their superior electrical and optical properties for optoelectronic devices. Recently, among the various growth methods, MOCVD has attracted considerable attention because it is suitable process with benefits such as large area growth, vertical alignment, and accurate doping for nano-device fabrication. However, ZnO based nanowires grown by MOCVD process were had the principal problems of 1st interfacial layers between substrate and nanowire, 2nd a broad diameter (about 100 nm), and 3rd high density, and 4th critical evaporation temperature of Zinc precursors. In particular, the growth of high performance nanowire for high efficiency nano-devices must be formed at high temperature growth, but zinc precursors were evaporated at high temperature.These problems should be repaired for materialization of ultra high performance quantum devices with quantum effect. For this reason, we firstly proposed the growth method of vertical aligned slim MgZnO nanowires (< 10 nm) without interfacial layers using self-phase separation by introduced Mg at critical evaporation temperature of Zinc precursors ($500^{\circ}C$). Here, the self-phase separation was reported that MgO-rich and the ZnO-rich phases were spontaneously formed by additionally introduced Mg precursors. In the growth of nanowires, the nanowires were only grown on the wurzite single crystal seeds as ZnO-rich phases with relatively low Mg composition (~36 at %). In this study, we investigated the microstructural behaviors of self-phase separation with increasing the Mg fluxes in the growth of MZO NWs, in order to secure drastic control engineering of density,diameter, and shape of nanowires.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.4
• /
• pp.324-332
• /
• 1998

The grain growth characteristics of dual-phase (${\alpha}+{\gamma}$) containing high Cr-steel have investigate using ${\alpha}$-, ${\gamma}$-single phases and (${\alpha}+{\gamma}$)dual-phase of 12%Cr Steel. The heat treatment has performed at $1000-1200^{\circ}C$ for 1-100hr. The results are as follows : 1) The grain growth rate in (${\alpha}+{\gamma}$) dual phase was substantially slower than that of single grain. 2) The relation between mean grain radius $\bar{{\gamma}}$ and annealing time t is, in general, described as following equation : $$(\bar{{\gamma}})^n-(\bar{{\gamma}_o})^n=K_n{\cdot}t{\cdots}{\cdots}(1)$$ i) In the case of single phase of high Cr steel, Eq.(1) is described as $(\bar{{\gamma}})^2-(\bar{{\gamma}_o})^2=K_2{\cdot}t$ and the grain growth is controlled by boundary migration. ii) In dual phase, the grain growth needs diffusion of alloying elements because the chemical composition of ${\alpha}$- and ${\gamma}$- phases differs from each other. When the volume fraction of ${\alpha}$-, ${\gamma}$-phase was almost equal and ${\gamma}$-phase in the case of 80 and $90%{\gamma}$. Eq.(1) is described as $(\bar{{\gamma}})^3-(\bar{{\gamma}_o})^3=K_3{\cdot}t$ because the grain growth is controlled by volume diffusion iii) In the case of ${\gamma}$-rich phase (80 and $90%{\gamma}$), the grain growth of minor phase (10 and $20%{\alpha}$) is described as $(\bar{{\gamma}})^4-(\bar{{\gamma}_o})^4=K_4{\cdot}t$ because the boundary diffusion is predominent rather than volume diffusion.

• Childhood Kidney Diseases
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2016

Purpose: We investigated whether serum levels of insulin growth factor-1 (IGF-1) and insulin growth factor binding protein-3 (IGFBP-3) are valuable in predicting clinical outcomes or are correlated with other laboratory findings in children with Henoch-$Sch{\ddot{o}}nlein$ purpura (HSP). Methods: We examined 27 children who were consecutively admitted to our hospital with HSP between January 2011 and February 2012. Blood tests (C-reactive protein, white blood cell count, platelet count, erythrocyte sedimentation rate, albumin, immunoglobulin A, complement C3, antineutrophil cytoplasmic antibody, IGF-1, IGFBP-3) and urine tests were performed upon admission. IGF-1 and IGFBP-3 were resampled in the recovery phase. Controls included 473 children whose IGF-1 and IGFBP-3 were sampled for evaluating their growth, at the outpatient department of pediatric endocrinology in our hospital. IGF-1 and IGFBP-3 were compared between the HSP children and controls, and between the acute and recovery phases in HSP children. The ability of these values to predict clinical outcomes including renal involvement was analyzed using bivariate logistic regression analysis (BLRA). Results: IGF-1 and IGFBP-3 were not different between the HSP children and controls ($148.7{\pm}117.6$ vs. $69.2{\pm}96.9$, P=0.290: $3465.9{\pm}1290.9$ vs. $3597.2{\pm}1,127.6$, P=0.560, respectively). There was no significant difference in IGF-1 or IGFBP-3 between acute and recovery phases. Based on the BLRA, no variable, including IGF-1 and IGFBP-3, could predict clinical outcomes including the presence of nephritis Conclusion: We concluded that IGF-1 and IGFBP-3 do not predict clinical outcomes of HSP, including renal involvement, in this study.

• Korean Journal of Materials Research
• /
• v.13 no.11
• /
• pp.756-760
• /
• 2003

Two dimensional computer simulations were conducted on percolative structure in which second phases with various short diameter were arranged in matrix phase. In case of prohibiting the overlap among the second phases, the maximum area fraction of second phase arranged in matrix was increased with higher short diameter. In case of allowing the overlap among the second phases, the critical area fraction was increased with higher short diameter and the total number of distributed second phase was decreased. This results represented that thickness variation of short diameter by grain growth on the production processes affect significantly forming the completion path.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.3
• /
• pp.159-164
• /
• 1998

The O/W and W/O emulsions containing Scutellariae Radix extract(SRE) which is very slightly soluble in oil phases and sparingly soluble in water phases, were prepared by homogenizing water and oil phases with emulsifier. The diameters of emulsion were ranged from 100 to $300\;{\mu}m$. The viscosity of W/O emulsion was higher than that of O/W emulsion. W/O emulsion was more stable than O/W emulsion which was gradually degraded when tested by centrifuge method and temperature tolerance method at $50^{\circ}C$. The antibacterial activity of two emulsions was not significantly different from that of aqueous solution of SRE, and showed similar MIC and bacterial growth inhibition rate.