• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.1020-1027
• /
• 2000

A simple model for describing the non-spherical particle growth phenomena has been developed. In this model, we solve simultaneously particle volume and surface area conservation sectional equations that consider particles' non-sphericity. From the correlation between two conserved properties of sections, we can predict the evolution of the aggregates' morphology. This model was compared with a simple monodisperse-assumed model and more rigorous two-dimensional sectional model. For comparison, formation and growth of silica particles have been simulated in a constant temperature reactor environment. This new model showed good agreement with the detailed two-dimensional sectional model in total number concentration and primary particle size. The present model successfully predicted particle size distribution and morphology without costing very heavy computation load and memory needed for the analysis of two dimensional aerosol dynamics.

• 한국결정성장학회지
• /
• 제10권6호
• /
• pp.373-377
• /
• 2000

승화 성장법으로 성장된 6H-SiC 단결정에 대하여 etching을 행하여 형성된 etch pit의 형상과 결함과의 관계에 대하여 고찰하였다. (0001) 기저면에서는 육각형의 전형적인 etch pit이 형성되었다. micropipe에 의해서도 유사한 형태의 pit이 형성되었으며, 면결함에 형성된 etch pits을 통하여 SiC 결정의 내부에 형성된 planar defects도 성장 결정과 동일한 구조를 가지면서 형성됨을 알 수 있었다.

• 전기학회논문지P
• /
• 제51권1호
• /
• pp.33-38
• /
• 2002

In this study, the metastable state diamond thin films have been deposited on Si substrates from methane-hydrogen and oxygen mixture using microwave plasma enhanced chemical vapor deposition (MPCVD) method. Effects in experimental parameters of MPCVD including methane concentrations, oxygen additions, operating pressure, deposition time on the growth rate and crystallinity were investigated. Diamond thin film was synthesized under the following conditions: methane concentration of 0.5%(0.5sccm)~5%(5sccm), oxygen concentration of 0~80%(2.4sccm), operating pressure of 30Torr~70Torr, deposition time of 1~32hr. SEM, XRD, and Raman spectroscopy were employed to analyze the growth rate and morphology, crystallinity and prefered growth direction, and relative amounts of diamond and non-diamond phases, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권7호
• /
• pp.1035-1040
• /
• 2003

This experiment was conducted to investigate the effects of fat sources on growth performance, nutrient digestibility, serum traits and intestinal morphology in weaning pigs. A total of 128 weaning pigs (Landrace${\times}$Large White${\times}$Duroc, $21{\pm}2$ days of age, $5.82{\pm}0.13kg$ of average initial body weight) were allotted in a randomized complete block (RCB) design with four treatments: 1) corn oil, 2) soybean oil, 3) tallow and 4) fish oil. Each treatment had 8 replicates with 4 pigs per pen. During phase I period (d 0 to 14), pigs fed corn oil or soybean oil diet tended to show higher ADG and FCR than any other treatments although there was no significant difference. During phase II period (d 15 to 28), pigs fed corn oil diet showed better ADG and ADFI than pigs fed soybean oil, tallow or fish oil. For overall period, growth performance of weaning pigs was improved (p<0.05) when pigs were fed soybean oil or corn oil. Apparent digestibility of energy and fat was improved when pigs were fed corn oil diet (p<0.05). Supplementation of corn oil resulted in higher serum triglyceride concentration than the other treatments (p<0.05). However, there was a lower cholesterol concentration when corn oil was provided compared to tallow or fish oil. Pigs fed corn oil tended to have increased villus height compared with soybean oil, tallow or fish oil treatment (p<0.05). This experiment suggested that vegetable oils such as corn oil or soybean oil, were much better fat source for improving growth performance of weaning pigs.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2374-2385
• /
• 1994

SiCw/Al composite material is especially attractive because of their superior specific strength, specific stiffness, corrosion fatigue resistance, creep resistance, and wear resistance compared with the corresponding wrought Al alloy. In this study, Fatigue crack growth behavior and fatigue crack path morphology(FCPM) of SiC whisker reinforced Al 6061 alloy with 25% SiC volume fraction and Al 6061 allay were performed. Result of the fatigue crack growth test sgiwed that fatigue crack growth rate of SiCw/Al 6061 composite was slower than that of Al 6061 matrix therefore it was confirmed that Sic whisker have a excellent fatigue resistance. And Al 6061 matrix had only FCPM perpendicular to loading direction. On the other hand SiCw/Al 6061 composite had three types in fatigue crack path morphology. First type is that both sides FCPM of artificial notch are perpendicular to loading direction. Second type is that a FCPM in artifical notch has slant angle to loading direction and the other side FCPM is perpendicular to loading direction. Third type is that both sides FCPM of notch have slant angle to loading direction. It was considered that this kinds of phenomena were due to non-uniform distribution of SiC whisker and confirmed by SEM observation for fracture mechanism study.

• 한국표면공학회지
• /
• 제31권6호
• /
• pp.345-358
• /
• 1998

The evolution of surface roughness and morphology in epitaxial Si and $Si_{0.7}Ge{0.3}$ alloys grown by UHV opm-beam sputter deposition onto nominally-singular, [100]-, and [110]-mi-scut Si(001) was investigated by stomic force microscopy and trasmission electron microscopy. The evolution of surface roughness of epitaxial Si films grown at $300^{\circ}C$ is inconsistent with conventional scaling and hyperscaling laws for kineti roughening. Unstable growth leading to the formation of mounds separated by a well-defined length scale is observed on all substrates. Contraty to previous high-temperature growth results, the presence of steps during deposition at $300^{\circ}C$ increases the tendency toward unstable growth resulting in a much earlier development of mound structures and larger surface roughnesses on vicival substrates. Strain-induced surface roughening was found to dominate in $Si_{0.7}Ge{0.3}$ alloys grown on singular Si(001) substrates at $T_S\ge450^{\circ}C$ where the coherent islands are prererentially bounded along <100> directions and eshibt {105} facetting. Increasing the film thickness above critical values for strain relaxation leads to island coalescence and surface smoothening. At very low growth temperatures ($T_s\le 250^{\circ}C$), film surfaces roughen kinetically, due to limited adatom diffusiviry, but at far lower rates than in the higher-temperature strain-induced regime. There is an intermediate growth temperature range, however, over which alloy film surfaces remain extremely smooth even at thicknesses near critical values for strain relaxation.

• 한국환경과학회지
• /
• 제21권3호
• /
• pp.267-276
• /
• 2012

Spaceflights results in the reduction of immune status of human beings and increase in the virulence of microorganisms, especially gram negative bacteria. The growth of Klebsiella pneumoniae is enhanced by catecholamines and during spaceflight, elevation in the levels of cortisols occurs. So it is necessary to know the changes in physiology, virulence, antibiotic resistance and gene expression of K. pneumoniae under microgravity conditions. The present study was undertaken to study effect of simulated microgravity on growth, morphology, antibiotic resistance and cross stress resistance of K. pneumoniae to various stresses. The susceptibility of simulated microgravity grown K. pneumoniae to ampicillin, penicillin, streptomycin, kanamycin, hygromycin and rifampicin were evaluated. The growth of bacteria was found to be fast compared with normal gravity grown bacteria and no significant changes in the antibiotic resistance were found. The bacteria cultured under microgravity conferred cross stress resistance to acid, temperature and osmotic stress higher than the normal gravity cultured bacteria but the vice versa was found in case of oxidative stress.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.955-956
• /
• 2004

• 한국버섯학회지
• /
• 제2권2호
• /
• pp.49-59
• /
• 2004

영지속 (Ganoderma) 수집 균주의 유연관계를 밝히고자 균사체 생장, 후막포자 형성여부, 온도별 균사 생장, 자실체의 형태를 조사하였다. 영지의 균사생장은 115개 균주 중 68개 균주가 GCM에서 가장 양호하였으며, 균사생장은 균주간에 많은 변이가 있었다. 수집균주는 균총의 형태에 따라 28개 group으로 구분되었는데 대부분 CM3와 CM8 group에 속하였다. 이들 균사체를 현미경으로 관찰한 결과 후막포자를 형성한 균주는 G. lucidum ASI 7022 등 16균주였으며, 국내에서 수집된 대부분의 G. lucidum 균주들은 후막포자를 형성하지 않았다. 한편 이들은 온도별 균사생장 시험에서도 $35^{\circ}C$ 고온에서 상대적으로 균사생장이 저조하였는데 미국에서 도입된 G. lucidum과 다른 특성을 보이고 G. tsugae와 유사한 특성이었다. 영지 115개 균주 중 톱밥배지에서 자실체가 발생한 균주는 97개 균주였고 형태는 편각형이 89.7%, 녹각형이 10.3% 였으며, 이러한 형태는 $CO_2$의 농도에 따라 변이가 있었다. 본 실험 결과 국내에서 수집된 G. lucidum 균주는 분류를 재검토하여야 할 것으로 사료되었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권2호
• /
• pp.100-104
• /
• 2006

In this study, we investigated the relationship between the morphology and the rheological properties of Penicillium citrinum to improve the production of neo-fructosyltransferase (neo-FTase). In a 2.5 L bioreactor culture of P. citrinum, it was observed that agitation speed and aeration rate had significant effects on the production of neo-FTase and that maximum cell mass and neo-FTase production obtained at 500 rpm and 1.5vvm were 8.14 g/L and $53.2{\times}10^{-3} U/mL$, respectively. Cell mass and neo-FTase production increased to 91.53 and 25.17%, respectively. In the morphology and rheology studies, P. citrinum showed a typical pellet morphology that was explained by a shaving mechanism; this phenomenon was significantly affected by carbon sources. The rheology of neo-FTase fermentation by P. citrinum was dependent on cell growth and fungal morphology.