• Journal of Convergence Society for SMB
• /
• v.6 no.3
• /
• pp.43-48
• /
• 2016

Current address-based Internet has started to expose the number of limitations, with the growth of the Internet. Most of the problems have been solved by adding new features to the Internet or some modification of existing features but some problems can not be solved because it is believed that the structural limitations of the Internet. Overcoming to fundamentally the limitations of the Internet, ID-based Future Internet research is under active research going on in the competitive atmosphere of the United States and Europe. However, most studies have been promoted in a specific field is concentrated in a limited area. For the future Internet, there is a need to derive the requirements to overcome the limitation and accommodate the features and advantages of the existing studies. This paper compares and analyzes the characteristics and advantages and disadvantages for the ID-based Future Internet Research, and describes the requirements to have the ID-based Future Internet.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.176-190
• /
• 2011

Today's young generation in digital era has a rich education environment and convenient life, on the other hand, there was negative impact on growth as normal body type because of adverse impact on an excessive study and insufficient exercise, etc. Also, for these people in IT culture generation, using small mobile including computer for long time is becoming main issue as changing factor in posture and body type in terms of spine like their neck disc. This body-typed characteristic reaches to normal adult body type in the process of physical development of adult woman and has least modification in body type. Therefore, despite of early young generation, body suitability of upper body clothes might caused imbalance. So, for intended to early 20s women, to design clothes with consideration on imbalance of body type by bended and curved spine, body type studies about size of upper body and forms are needed. As this researcher measured the body type of early 20s college women in metropolitan area, changes in body type of young generation with use of digital equipment recently were recognized since straight body type was decreased unequally and had characteristic in terms of changes to be bended body type. The changes of these body type should be considered to make clothes. Also, since there are some restrictions on this research objects in terms of local and numbers of measured objects, a broad interpretation of result on this research should be really careful.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.75.2-75.2
• /
• 2013

Atomic layer deposition (ALD), utilizing self-limiting surface reactions, could offer promising perspectives for future efficient energy conversion devices. The capabilities of ALD for surface/interface modification and construction of novel architectures with sub-nanometer precision and exceptional conformality over high aspect ratio make it more valuable than any other deposition methods in nanoscale science and technology. In the context, a variety of researches on fabrication of active materials for energy conversion applications by ALD are emerging. Among those materials, one-dimensional nanotubular titanium dioxide, providing not only high specific surface area but also efficient carrier transport pathway, is a class of the most intensively explored materials for energy conversion systems, such as photovoltaic cells and photo/electrochemical devices. The monodisperse, stoichiometric, anatase, TiO2 nanotubes with smooth surface morphology and controlled wall thickness were fabricated via low-temperature template-directed ALD followed by subsequent annealing. The ALD-grown, anatase, TiO2 nanotubes in alumina template show unusual crystal growth behavior which allows to form remarkably large grains along axial direction over certain wall thickness. We also fabricated dye-sensitized solar cells (DSCs) introducing our anatase TiO2 nanotubes as photoanodes, and studied the effect of blocking layer, TiO2 thin films formed by ALD, on overall device efficiency. The photon convertsion efficiency ~7% were measured for our TiO2 nanotubebased DSCs with blocking layers, which is ~1% higher than ones without blocking layer. We also performed open circuit voltage decay measurement to estimate recombination rate in our cells, which is 3 times longer than conventional nanoparticulate photoanodes. The high efficiency of our ALD-grown, anatase, TiO2 nanotube-based DSCs may be attributed to both enhanced charge transport property of our TiO2 nanotubes photoanode and the suppression of recombination at the interface between transparent conducting electrode and iodine electrolytes by blocking layer.

• Korean Journal of Materials Research
• /
• v.22 no.7
• /
• pp.362-367
• /
• 2012

Magnetite nanoparticles(NPs) have been the subject of much interest by researchers owing to their potential use as magnetic carriers in drug targeting and as a tumor treatment in cases of hyperthermia. However, magnetite nanoparticles with 10 nm in diameter easily aggregate and thus create large secondary particles. To disperse magnetite nanoparticles, this study proposes the infiltration of magnetite nanoparticles into hybrid silica aerogels. The feasible dispersion of magnetite is necessary to target tumor cells and to treat hyperthermia. Magnetite NPs have been synthesized by coprecipitation, hydrothermal and thermal decomposition methods. In particular, monodisperse magnetite NPs are known to be produced by the thermal decomposition of iron oleate. In this study, we thermally decomposed iron acetylacetonate in the presence of oleic acid, oleylamine and 1,2 hexadecanediol. We also attempted to disperse magnetite NPs within a mesoporous aerogels. Methyltriethoxysilicate(MTEOS)-based hybrid silica aerogels were synthesized by a supercritical drying method. To incorporate the magnetite nanoparticles into the hybrid aerogels, we devised two methods: adding the synthesized aerogel into a magnetite precursor solution followed by nucleation and crystal growth within the pores of the aerogels, and the infiltration of magnetite nanoparticles synthesized beforehand into aerogel matrices by immersing the aerogels in a magnetite nanoparticle colloid solution. An analysis using a vibrating sample magnetometer showed that approximately 20% of the magnetite nanoparticles were well dispersed in the aerogels. The composite samples showed that heating under an inductive magnetic field to a temperature of $45^{\circ}C$ is possible.

• Molecules and Cells
• /
• v.28 no.5
• /
• pp.479-487
• /
• 2009

Glutathione reductase (GR) is an enzyme that recycles a key cellular antioxidant molecule glutathione (GSH) from its oxidized form (GSSG) thus maintaining cellular redox homeostasis. A recombinant plasmid to overexpress a GR of Brassica rapa subsp. pekinensis (BrGR) in E. coli BL21 (DE3) was constructed using an expression vector pKM260. Expression of the introduced gene was confirmed by semi-quantitative RT-PCR, immunoblotting and enzyme assays. Purification of the BrGR protein was performed by IMAC method and indicated that the BrGR was a dimmer. The BrGR required NADPH as a cofactor and specific activity was approximately 458 U. The BrGR-expressing E. coli cells showed increased GR activity and tolerance to $H_2O_2$, menadione, and heavy metal ($CdCl_2$, $ZnCl_2$ and $AlCl_2$)-mediated growth inhibition. The ectopic expression of BrGR provoked the co-regulation of a variety of antioxidant enzymes including catalase, superoxide dismutase, glutathione peroxidase, and glucose-6-phosphate dehydrogenase. Consequently, the transformed cells showed decreased hydroperoxide levels when exposed to stressful conditions. A proteomic analysis demonstrated the higher level of induction of proteins involved in glycolysis, detoxification/oxidative stress response, protein folding, transport/binding proteins, cell envelope/porins, and protein translation and modification when exposed to $H_2O_2$ stress. Taken together, these results indicate that the plant GR protein is functional in a cooperative way in the E. coli system to protect cells against oxidative stress.

• Plant Breeding and Biotechnology
• /
• v.5 no.3
• /
• pp.237-242
• /
• 2017

AT-hook proteins of plant have shown to be involved in growth and development through the modification of chromatin architecture to co-regulate transcription of genes. Recently, many genes encoding AT-hook protein have been identified and their involvement in senescence delay is investigated. In this study, soybean transgenic plants overexpressing chromatin architecture-controlling ATPG7 gene was produced by Agrobacterium-mediated transformation and investigated for the positive effect on the important agronomic traits mainly focusing on yield-related components. A total of 27 transgenic soybean plants were produced from about 400 explants. $T_1$ seeds were harvested from all transgenic plants. In the analysis of genomic DNAs from soybean transformants, ATPG7 and Bar fragments were amplified as expected, 975 bp and 408 bp in size, respectively. And also exact gene expression was confirmed by reverse transcriptase-PCR (RT-PCR) from transgenic line #6, #7 and #8. In a field evaluation of yield components of ATPG7 transgenic plants ($T_3$), higher plant height, more of pod number and greater average total seed weight were observed with statistical significance. The results of this study indicate that the introduction of ATPG7 gene in soybean may have the positive effect on yield components.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.6
• /
• pp.923-932
• /
• 2019

Current strategies of strain improvement processes are mainly focused on enhancing the synthetic pathways of the products. However, excessive metabolic flux often creates metabolic imbalances, which lead to growth retardation and ultimately limit the yield of the product. To solve this problem, we applied a dynamic regulation strategy to produce $\text\tiny{L}$-phenylalanine ($\text\tiny{L}$-Phe) in Escherichia coli. First, we constructed a series of Phe-induced promoters that exhibited different strengths through modification of the promoter region of tyrP. Then, two engineered promoters were separately introduced into a Phe-producing strain xllp1 to dynamically control the expression level of one pathway enzyme AroK. Batch fermentation results of the strain xllp3 showed that the titer of Phe reached 61.3 g/l at 48 h, representing a titer of 1.36-fold of the strain xllp1 (45.0 g/l). Moreover, the $\text\tiny{L}$-Phe yields on glucose of xllp3 (0.22 g/g) were also greatly improved, with an increase of 1.22-fold in comparison with the xllp1 (0.18 g/g). In summary, we successfully improved the titer of Phe by using dynamic regulation of one key enzyme and this strategy can be applied for improving the performance of strains producing other aromatic amino acids and derived compounds.

• Journal of Ginseng Research
• /
• v.43 no.4
• /
• pp.654-665
• /
• 2019

Background: Panax ginseng Meyer has widely been used as a traditional herbal medicine because of its diverse health benefits. Amounts of ginseng compounds, mainly ginsenosides, vary according to seasons, varieties, geographical regions, and age of ginseng plants. However, no study has comprehensively determined perturbations of various metabolites in ginseng plants including roots and leaves as they grow. Methods: Nuclear magnetic resonance ($^1H$ NMR)-based metabolomics was applied to better understand the metabolic physiology of ginseng plants and their association with climate through global profiling of ginseng metabolites in roots and leaves during whole growing periods. Results: The results revealed that all metabolites including carbohydrates, amino acids, organic acids, and ginsenosides in ginseng roots and leaves were clearly dependent on growing seasons from March to October. In particular, ginsenosides, arginine, sterols, fatty acids, and uracil diphosphate glucose-sugars were markedly synthesized from March until May, together with accelerated sucrose catabolism, possibly associated with climatic changes such as sun exposure time and rainfall. Conclusion: This study highlights the intrinsic metabolic characteristics of ginseng plants and their associations with climate changes during their growth. It provides important information not only for better understanding of the metabolic phenotype of ginseng but also for quality improvement of ginseng through modification of cultivation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.109-115
• /
• 2019

Most demand forecasting studies for telecommunication services have focused on estimating market size at the introductory stage of new products or services, or on suggesting improvement methods of forecasting models. Although such studies forecast business growth and market sizes through demand forecasting for new technologies and overall demands in markets, they have not suggested more specific information like relative market share, customers' preferences on technologies or service, and potential sales power. This study focuses on the telecommunication service industry and explores ways to calculate the relative market shares between competitors, considering competitive situations at the introductory stage of a new mobile telecommunication service provider. To reflect the competitive characteristics of the telecommunication markets, suggested is an extended conjoint analysis using service coverage and service switching rates as modification variables. This study is considered to be able to provide strategic implications to businesses offering existing service and ones planning to launch new services. The result of analysis shows that the new service provider has the greatest market share at the competitive situation where the new service covers the whole country, offers about 50% of existing service price, and allows all cellphones except a few while the existing service carrier maintains its price and service and has no response to the new service introduction. This means that the market share of the new service provider soars when it is highly competitive with fast network speed and low price.

• Composites Research
• /
• v.33 no.6
• /
• pp.415-420
• /
• 2020

The interfacial properties in carbon fiber composites, which control the overall mechanical properties of the composites, are very important. Effective interface enhancement work is conducted on the modification of the carbon fiber surface with carbon nanotubes (CNTs). Nonetheless, most surface modifications methods do have their own drawbacks such as high temperatures with a range of 600~1000℃, which should be implemented for CNT growth on carbon fibers that can cause carbon fiber damages affecting deterioration of composites properties. This study includes the use of in-situ interfacial polymerization of polyamide 610/CNT to fabricate the carbon fiber composites. The process is very fast and continuous and can disperse CNTs with random orientation in the interface resulting in enhanced interfacial properties. Scanning electron microscopy was conducted to investigate the CNT dispersion and composites morphology, and the thermal stability of the composites was analyzed via thermogravimetric analysis. In addition, fiber pull-out tests were used to assess interfacial strength between fiber and matrix.