• Fisheries and Aquatic Sciences
• /
• v.26 no.7
• /
• pp.447-454
• /
• 2023

Fast somatic growth is important considerations for successful and competitive aquaculture industry. In rainbow trout reared in South Korea, triploid induction was used to suppress negative influence of reproductive maturation to body growth. However, the effects of triploidy are visible in both mature fish and developing juvenile fish. Thus, it is also important to explicate the effect of triploid induction on growth during the early-life stages of rainbow trout-alevins and fry. Rainbow trout fertilized eggs were subjected to triploid induction and polyploidy was checked by flow cytometry. Diploid and triploid alevins and fry were reared separately in tanks with constant flow of freshwater through flow-through water system and growth measurements were done from zero days after hatching (DAH 0) until DAH 134. The egg-yolk morphometrics of alevins-yolk length, yolk height, yolk volume and yolk weight-were statistically similar (p > 0.05) in both genotypes from DAH 0 to DAH 22. The total length, body height, and body weight of alevins and fry were statistically better (p > 0.05) in both genotypes until DAH 92 but thereafter, triploid had a significantly better growth performance (p < 0.05) over diploid fish until the completion of study at DAH 134. With that, triploid induction did not influence alevin yolk regions and body growth and fry somatic growth until around 3 months after hatching, but considerable growth enhancement was subsequently apparent.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2023

Power transmission shafts in rotary wing aircraft use a hollow shaft to reduce weight. We can apply linear elastic fracture mechanics to predict crack propagation behavior. This paper predicted crack growth life of a hollow shaft with a circumferential through-type crack by finite element analysis. A 2D finite element model was created by applying a torsion and forming elements considering cracks. We defined the initial crack length and performed the finite element analysis by increasing the crack length to derive stress intensity factor at crack tips. We defined the length just prior to the stress intensity factor exceeding the fracture toughness as the crack limit length. We calculated the crack limit length using a handbook and numerically integrated the crack growth rate equation to derive growth life of each crack. The growth life of each crack was compared to verify the proposed finite element analysis method.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.486-494
• /
• 2021

Watermelon (Citrullus lanatus (Thunb.) Matsum. & Nakai) is sensitive to low temperature and shows retarded growth under 10℃. Although early transplanting guarantees higher returns, it requires cost and labor to maintain the appropriate temperature for plant growth. Therefore, cultivars tolerant to chilling stress is necessary to reduce the cost and labor requirements. The purpose of this study is to analyze data on plant growth and fruit enlargement under continuous chilling night temperature to develop new cultivars tolerant to chilling temperature. Two cultivars expected to have chilling tolerance and another cultivar sensitive to chilling temperature were grown in greenhouses with chilling and optimal night temperature conditions. In the early growth stage after transplanting, the cultivars expected to have chilling tolerance showed better vine length, fresh weight and dry weight. However, one of the tolerant cultivars showed significantly lower vine length, leaf length and width, and petiole length than the sensitive cultivar during pollination period and later growth stage, showing genotype specific responses. The fruit length, width, and weight were also significantly lower in the tolerant cultivar. The fruit set ratio was significantly higher in the chilling sensitive cultivar than the two tolerant cultivars. These results suggest that the present chilling tolerant cultivars in watermelon were selected based on their performance in the early growth stage, and further studies on chilling tolerance in different growth and development stages are required to develop cultivars adapted to various forcing cultivation systems.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.402-416
• /
• 1999

The thermal distributions near the growth interface of 150nm CZ crystals were measured by three thermocouples installed at the center, middle (half radius) and edge (10nm from surface) of the crystals. The results show that larger growth rates produced smaller thermal gradients. This contradicts the widely used heat flux balance equation. Using this fact, it is confirmed in CZ crystals that the type of point defects created is determined by the value of the thermal gradient(G) near the interface during growth, as already reported for FZ crystals. Although depending on the growth systems the effective length of the thermal gradient for defect generation are varied, we defined the effective length as 10n,\m from th interface in this experiment. If the G is roughly smaller than 20C/cm, vacancy rich CZ crystals are produced. If G is larger than 25C/cm, the species of point defects changes dramatically from vacancies to interstitials. The experimental results after detaching FZ and CZ crystals from the melt show that growth interfaces are filled with vacancies. We propose that large G produces shrunk lattice spacing and in order to relax such lattice excess interstitials are necessary. Such interstitials recombine with vacancies which were generated at the growth interface, nest occupy interstitial sites and residuals aggregate themselves to make stacking faults and dislocation loops during cooling. The shape of the growth interface is also determined by te distributions of G across the interface. That is, the small G and the large G in the center induce concave and convex interfaces to the melts, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.557-562
• /
• 2002

This study was to estimate population growth parameters of the freshwater bivalve, Corbicula (Corbiculina) papyacca (Heude) in Korea. Samples were collected from Jojong stream in Chungpyeong from September 1999 to August 2000. Ages were determined from the ring of shell, The shell length of the samples ranged from 4,2 mm to 28.1 mm, The ring on the surface of shell was formed once a year from January to March, Marginal increment analysis of shell rings indicated that annuli were formed in June. Spawning period was estimated to be May to August with a peak between June and July through fatness analysis, and thus rings were considered to be true annual marks. Von Bertalanffy's growth parameter were estimated from a nonlinear method with the value of logical maximum shell length ($L_{propto}$) was 34,36 mm, K was 0.1531/year, logical age of shell length 0 ($t_{0}$) was -0,5246 year, and logical maximum total weight ($W_{propto}$) was 11.42 g.

• Journal of Korea Foundry Society
• /
• v.17 no.6
• /
• pp.545-551
• /
• 1997

14 cm length Al-15Cu-1Mg alloys have been directionally solidified in 3 mm diameter alumina tubes in a furnace moved with a constant velocity V=12 cm/hr under various furnace temperatures of 660, 710 and $760^{\circ}C$. By analysing the evolution of the temperature profiles along the alloy length during the solidification, the growth characteristics such as the position of the solid/liquid interface, the local growth velocity (R) and the temperature gradient at the solid/liquid interface (G) have been determined. The effects of the furnace temperature on the growth behavior have been investigated by the comparison of R and G values for each temperature. Under the furnace temperature of $760^{\circ}C$, steady state growth region was observed for the latter half of the growth period.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.421-428
• /
• 2015

This study was carried out to investigate the relationship between anatomical characteristics and growth rate of Quercus rubra from different origins of seed. Anatomical characteristics showed that all Quercus rubra species were ring-porous woods with 1~3 layers of large pores in earlywood, but the latewood had small pores oriented in radial direction. There were slight differences in libriform fiber length and vessel element diameter in the earlywood among different provenance origins of seeds. In growth rate, the libriform fiber length and vessel element diameter was negative correlation in the earlywood, but not correlative in the latewood, and vessel element length was not correlative in the early and latewood, Volumetric composition of libriform fiber and ray in latewood was higher than those in ear lywood, and a higher composition of vessel element was observed in earlywood. Ray height was the range of from 11 to 15 cells.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.165-167
• /
• 1998

Nd:YAG crystals were grown by Horizontal Bridgman method. The effects of sliding rate (growth rate) of Molydbenum container, growth atmosphere and concentration of Neodymium ions on crystal qualities were investigated. The size of the crystals grown was up to 150-200 mm in length, 70 mm in width and 25-35 mm in thickness. Crystals grown under the optimum conditions were violet, transparent and could not be observed any macroscopic defects. Under the polarizing microscopoc observations with crossed polar, striations, {211} facets and inclusions were detected. With the grown crystals, prototypes of laser rods for 1.06$\mu$m laser application were manufactured and then characterized. As a result, we can get high quality of Nd:YAG laser rods with <111> and <110> axis, 63 mm in length and6.3 mm in diameter.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.73-76
• /
• 2001

We have simulated the effect of fracture characteristics on reduction of effective permeability of the fractured rocks due to in-situ bacteria growth. A nutrient is injected continuously for growth of in-situ bacteria. We used a power law for fracture length distribution and a fBm for fracture aperture spatial distribution. The results show that in-situ bacteria growth reduces the Permeability hyperbolically, but the porosity of backbone fracture does not change significantly. It shows that reduction of the permeability proceeds at faster speed for smaller value of length exponent(a) and for larger value of Hurst exponent(H). The fracture length distribution has stronger effect on speed of reduction than the aperture spatial distribution. The time needed to reduce permeability is inversely proportional to the hydraulic gradient.

• Fisheries and Aquatic Sciences
• /
• v.2 no.1
• /
• pp.78-84
• /
• 1999

Ultrastructural changes in the cuticle of Paleamon serrifer associated with the intermolt cycle were examined and quantified as changes in the cuticular thickness. The cuticular thickness in each zoea stage increased with time elapsed after molting. The cuticle in the premolt stage was about 1.5 and 3 times thicker than that in the postmolt and intermolt stage, respectively. The cuticle in the premolt stage, including the molting space, was more than 5 times as thick as in the postmolt stage. In addition, newly hatched larvae were individually reared in the laboratory and body length for each specimen was measured frequently until the end of zoea VI. An average increase in body length between one zoea stage and the next is about $10\%$ of the length of the previous stage. Within individual zoea stages, the premolt stage had a body length some 0.3% longer than that of the postmolt stage, indicating a growth rate of about 0.03 mm/d.