• Journal of Environmental Science International
• /
• v.28 no.8
• /
• pp.709-712
• /
• 2019

The effect of insect feed powder on the growth performance and economic evaluation of ducks was investigated. One hundred and twenty-old Pekin ducks were randomly assigned to two dietary treatments (0% and 1% Hermetia illucens powder) with three replicates of 20 birds each for 14-42 d. No significant (p>0.05) difference in growth performance between the control and 1% H. illucens powder was observed, except the feed conversion ratio (p<0.05), for the experimental period. The treatments with 1% H. illucens powder improved the economic indicators in comparison with the controls. Therefore, a diet supplemented with 1% H. illucens powder could significantly improve the feed conversion ratios and increase the economic indicators.

• Journal of the Korean Society of Food Culture
• /
• v.7 no.1
• /
• pp.25-34
• /
• 1992

The purpose of this study was to investigate the value evaluation of foodstuff of 448 college students residing in the urban area. As a result of analyzing the value of each foodstuff, two to four factors were drawn from each foodstuff. The factors were classified into the social-conceptual factor, the preparatory factor, the quality factor, the economic factor, the subjective factor, and the complex factor. It was learned that the social-conceptual factor was dominant over the majority of college students in the evaluation of value of foodstuffs. There was a difference in the factor of the value evaluation for each foodstuff according to sex and the main growth region among the college students. A significant difference was found between the sexes regarding the preparatory factor and the economic factor. Also, in accordance with the main growth region, there was great difference in the social-conceptual factor(except for the Korean rice cake).

• Analytical Science and Technology
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2021

An analytical method was developed and optimized for the quantification of a plant growth regulator, 2,6-diisopropylnaphthalene (2,6-DIPN), in agricultural products using gas chromatography-tandem mass spectrometry. The samples were extracted, partitioned, and were purified using a Florisil® cartridge. To validate the analytical method, its specificity, linearity, limit of detection (LOD) and limit of quantification (LOQ) of the instrument, LOQ of the analytical method (MLOQ), accuracy, and repeatability were considered. The method displayed excellent results during validation, and is suitable for the determination and quantification of the low residual levels of the analyte in the agricultural samples. All of the results with the optimized method were satisfactory and within the criteria ranges requested in the Codex Alimentarius Commission guidelines and the Ministry of Food and Drug Safety guidelines for pesticide residue analysis. The developed method is simple and accurate and can be used as a basis for safety management of 2,6-DIPN.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.206-210
• /
• 2017

This study was performed to develope mathematical models for predicting growth kinetics of Staphylococcus aureus in the processed meat product, pyeonyuk. Growth patterns of S. aureus in pyeonyuk were determined at the storage temperatures of 4, 10, 20, and $37^{\circ}C$ respectively. The number of S. aureus in pyeonyuk increased at all the storage temperatures. The maximum specific growth rate (${\mu}_{max}$) and lag phase duration (LPD) values were calculated by Baranyi model. The ${\mu}_{max}$ values went up, while the LPD values decreased as the storage temperature increased from $4^{\circ}C$ to $37^{\circ}C$. Square root model and polynomial model were used to develop the secondary models for ${\mu}_{max}$ and LPD, respectively. Root Mean Square Error (RMSE) was used to evaluate the developed model and the fitness was determind to be 0.42. Therefore the developed predictive model was useful to predict the growth of S. aureus in pyeonyuk and it will help to prevent food-born disease by expanding for microbial sanitary management guide.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.4
• /
• pp.39-50
• /
• 2005

An evaluation demand and a market growth regarding evaluation and certification are increasing because the importance of information Security is gradually rising to solve the information disfunction. Therefore, it is necessary the cost-effect evaluation management of the Information Security System(ISS). In this paper, we propose the Semi-automated Evaluation Workflow Management System(Sa-EWMS) based on the Common Criteria(CC) which performs and manages evaluation work through the procedure when evaluator evaluates the Information Security System(ISS). The Sa-EWMS is solving a problem of consumption of time and effort and performing efficient evaluation, it is playing a significant role that traces workflow process of each work of the Engines and controls performance. It will be able to use useful the private evaluation enterprise which confront in an evaluation demand and a market growth.

• Korean Management Science Review
• /
• v.34 no.1
• /
• pp.15-25
• /
• 2017

We evaluated industry growth and employment effects of every possible pairs of 22 manufacturing sectors and 16 regions (i.e, 352 region-sectors). We used annual data of manufacturing sectors from 2008 to 2014 for the evaluation. The evaluation comprises of two steps; We first find several region-sectors that outperform others with respect to the effects of industry growth and employment, which are measured by location quotient analysis, shift share method, employment to GDP ratio and employment elasticity. In addition, cross-efficiency analysis follows to classify region-sector pairs into two sub-categories : efficient region-sectors that deserve to hold the current level of investments and inefficient region-sectors where we should consider efficiency improvements. To examine the efficiency, R&D investment, employment size, and capital investment were used as input factors and production volume, added value, changes in employment size, changes in annual salary per capita were used as output factors. For region-sector pairs that have outstanding growth and employment effects but are inefficient, we employed a CCR DEA model and analyzed how much to adjust the values of input and output factors to improve the efficiency scores. The analysis results showed that inefficiency is mainly due to several factors such as R&D investment, changes in employment size and changes in annual salary per capita.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1805-1815
• /
• 2019

While nickel-based alloys have been widely used for power plants due to corrosion resistance and good mechanical properties, during the last couple of decades, failures of nuclear components increased gradually. One of main degradation mechanisms was primary water stress corrosion cracking at dissimilar metal welds of piping and reactor head penetrations. In this context, precise estimation of welding effects became an important issue for ensuring reliability of them. The present study deals with a series of finite element analyses and crack growth rate evaluation of Alloys 690/152. Firstly, variation of residual stresses and equivalent plastic strains was simulated taking into account welding of a cylindrical block. Subsequently, extraction and pre-cracking of compact tension (CT) specimens were considered from different locations of the block. Finally, crack growth curves of the alloys and heat affected zone were developed based on analyses results combined with experimental data in references. Characteristics of crack growth behaviors were also discussed in relation to mechanical and fracture parameters.

• The Korean Journal of Franchise Management
• /
• v.12 no.2
• /
• pp.23-33
• /
• 2021

Purpose: The purpose of this study is to provide basic data such as development of sustainable support policies and performance management evaluation to support sustainable management of domestic franchises by deriving the sustainable growth cycle of domestic franchises. Research design, data, and methodology: This study is based on systematic review study. We combined search terms such as "Start-up", "Sustainability" and "Success" with four databases, RISS, KISS, e-article and DBpia and searched a total of 1,219 articles published by April 21, 2021. In the process, 35 studies were selected and analyzed after an expert review, excluding documents whose overlapping documents, gray zones (e.g., reports, conference presentations, etc.), degree papers, foreign language literature, and dependent variables were not related to the Sustainability factors. Using ERIS model, which is applied to research on the results of startup, and the franchise's growth cycle, which reflects the growth stage of franchises, we analyzed the factors behind the sustainability of franchise. Result: The results of the study are as follows. First, research on the sustainability of franchise has continued since 2009 in Korea, and has been conducted in various fields such as social welfare in addition to venture, start-up and management. Second, sustainability factors of franchise were analyzed from the ERIS performance model indicating the performance of venture, and the 68 subfactors were derived. Third, it is confirmed that there are important factors that affect the sustainable growth of franchise startups in each franchise's growth cycle. Conclusions: It is significant that through this study, we provided better understanding of the factors that sustain sustainability of franchises, policy suggestions, and presented the direction of future study. Theoretical suggestion is that the main reason for the continuous growth of franchise in each domestic franchise is based on the ERIS performance model. The practical implication is that the headquarters and Franchisor can use it to establish and evaluate performance indicators based on the business growth cycle. The results of this study are expected to be used as basic data for development and performance management evaluation of franchise start-up support policies to support the sustainable management of domestic franchises.

• STI Policy Review
• /
• v.1 no.1
• /
• pp.1-21
• /
• 2010

To achieve the "low carbon green growth" vision, the first step is securing core technologies. Therefore, S&T policy direction for green technology development is urgently needed. As of 2008, investment in green technology (GT) development hovered around 10% of the government's total R&D budget. Thus, the Korean government developed a plan to increase that percentage to 15%, by 2013. To develop reasonable investment strategies for green technology development, targeted strategies that reflect technology and market changes by green technology area are needed. However, the overall planning and coordination of national GT development is currently split among, approximately, 10 government ministries. To establish an efficient green technology development system, the so-called "Green Technology R&D Council" should be launched in collaboration with the Presidential Committee on Green Growth and the National Science and Technology Council. Furthermore, to build a solid foundation for commercializing the outcomes of GT development projects and promote GT transfer, the government should undertake two initiatives. First, the government should reinforce GT R&D performance management, by establishing a GT R&D performance management and evaluation system. Second, the government should implement the "customized packaged support for promoting green technology business rights and commercialization" and present "e-marketplace for market-oriented green technologies". Creating a pan-ministerial policy for GT development policy would necessitate restructuring the HR(Human Resources) development system, which is currently separated by technology area. Based upon mid/long-term HR supply and demand forecasts, the government should design differentiated HR development projects, continuously evaluate those projects, and reflect the evaluation results in future policy development. Finally, to create new GT-related industries, the "Green TCS (Testing, Certification, and Standards) System" needs to be implemented. For objective evaluation and diffusion of R&D results by green technology area, a common standardization plan for testing, analysis, and measurement, like the "Green TCS", should be developed and integrated.

• Journal of Mechanical Science and Technology
• /
• v.18 no.6
• /
• pp.961-971
• /
• 2004

Methods for determination of the crack opening stress intensity factor ($K_{op}$) and for estimation of the effective stress intensity factor range ($\Delta{K}_{eff}$) are evaluated for crack growth test data of aluminum alloys. Three methods of determining $K_{op}$, visual measurement, ASTM offset compliance method, and the neural network method proposed by Kang and Song, and three methods of estimating $\Delta{K}_{eff}$, conventional, the 2/PIO and 2/PI methods proposed by Donald and Paris, are compared in a quantitative manner by using evaluation criteria. For all $K_{op}$ determination methods discussed, the 2/PI method of estimating $\Delta{K}_{eff}$ provides good results. The neural network method of determining $K_{op}$ provides good correlation of crack growth data. It is recommended to use 2/PI estimation with the neural $K_{op}$ determination method. The ASTM offset method used in conjunction with 2/PI estimation shows a possibility of successful application. It is desired to improve the ASTM method.