• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.188-194
• /
• 2013

In this paper, we proposed a new method for pulmonary vessels image segmentation and refinement from pulmonary image. Proposed method consist of following five steps. First, threshold estimation is performed by polynomial regression analysis of histogram variation rate of the pulmonary image. Second, segmentation of pulmonary vessels object is performed by density-based segmentation method based on estimated threshold in first step. Third, 2D connected component labeling method is applied to segmented pulmonary vessels. The seed point of both side diaphragms is determined by eccentricity and size of component. Fourth step is diaphragm extraction by 3D region growing method at the determined seed point. Finally, noise cancelation of pulmonary vessels image is performed by 3D connected component labeling method. The experimental result is showed accurately pulmonary vessels image segmentation, the diaphragm extraction and the noise cancelation of the pulmonary vessels image.

• Spatial Information Research
• /
• v.13 no.2 s.33
• /
• pp.139-155
• /
• 2005

Today, ever growing population density in Seoul or areas near Seoul is problematic. To overcome the problem, the government tries to construct so called, 'New-towns'near Seoul to spread out the population over larger areas. But building new-towns created another problem of traffic between Seoul and New-towns. It can be solved if more public transportation systems such as urban railroads are constructed. In order to succeed in urban railroad construction, we have to make a perfect plan through in depth research on characteristics of the urban train and the construction site. In this paper, we propose a method to design the Decision Support Systems(DSS) using Geographic Information Systems(GIS) and Spatial Analysis for the planning of urban railroad construction.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.34-40
• /
• 1985

Characteristics of GaAE epilayers grown on (100) CaAs wa(tors by molecular beam epitaxy (MBE) under various single crystal growing conditions were investigated. In fabrica-ting GaAs, epilayer by MBE, the most important factors are a substrate temperature(ts) and a flux density ratio (As/Ga). In this experiment, the substrate temperature was varied in the range of 48$0^{\circ}C$ to $650^{\circ}C$ and As and Ga cell temperatures were varied in the range of 218$^{\circ}C$ to 256$^{\circ}C$ and 876$^{\circ}C$ to 98$0^{\circ}C$, respectively. At the substrate temperature of 54$0^{\circ}C$, As cell temperature of 23$0^{\circ}C$, and Ga cell temperature of 91$0^{\circ}C$, the As/Ga ratio was 5"10, the surface morphology was most smooth . Investigation of As-stabilized surface by RHEED and of depth profile by SIM5 showed that As is less stable than Ga. Also, X-ray diffraction measurement revealed that single crystals of (400) and (200) were formed at the both sub-strate temperatures of 52$0^{\circ}C$ and 54$0^{\circ}C$.TEX>.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.3
• /
• pp.177-185
• /
• 2010

Introduction: Epidermal growth factor receptor (EGFR) is expressed in human epithelial tumors including salivary cancers, and known to be correlated with tumor progression and poor clinical courses in some epithelial tumors. In this study, we determined the therapeutic effect of the anti-EGFR monoclonal antibody Erbitux (C225, cetuximab) in combination with the DNA topoisomerase I inhibitor irinotecan (CPT-11) on human salivary adenoid cystic carcinoma (SACC) cells growing in nude mice. Materials and Methods: At first, immunocytochemical analysis for the expression of EGFR and phosphorylated EGFR (pEGFR) on a human salivary ACC cell line (ACC3). To determine the in vivo effects of Erbitux and CPT-11, nude mice with orthotopic parotid tumors were randomized to receive intraperitoneal Erbitux (1 mg) two times per week, intraperitoneal Irinotecan (50 mg/kg) once per week, Erbitux plus CPT-11, or placebo. (control) Tumor volume and weight were measured. And mechanisms of in vivo activity of Erbitux and/or CPT-11 were determined by immunohistochemical/ immunofluorescent analyses. Results: Immunocytochemical staining of ACC3 demonstrated that EGFR was expressed and phosphorylated. CPT-11 inhibited ACC tumor growth in nude mice. Tumors of mice treated with CPT-11 and CPT-11 plus Erbitux exhibited increased tumor cell apoptosis and decreased microvessel density, which correlated with a decrease in the tumor volume in nude mice. But, CPT-11 seems not to be synergistic with Erbitux in our ACC3 model system. Conclusion: These results suggest that anti-EGFR monoclonal antibody and the DNA topoisomerase I inhibitor will be effective in the treatment of recurred or metastatic lesions of salivary ACC.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.141-157
• /
• 1995

Single crystals of TeO2 with large diameter were grown by Czochralski technique with auto-diameter control system. The ratio of crystal to crucible was 60-70%. The effect of critical pulling and rotation rate on the crystal quality was studied. Optimum growth parameters for high quality crystal pulling rate was less than 1.2 mm/hr. The solid-liquid interface was convex at the rotation rate of 10-23 rpm and concave at the rotation rate of more than 25 rpm, depending on the size of crystal and crucible. The platinum concentration in the melts is one of the main factors of the constitutional supercooling and thus the bubble entrapment in the growing crystal. Growth axis was confirmed to {110} direction during the whole growth procedure. Infrared spectrometric study and dislocation density measurment by chemical etching method on the grown crystal were performed. Finally, the reasons of cooperation of striations, inclusions, and optical inhomogeneities were discussed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.61-69
• /
• 2002

This study was conducted to develop revegetation methods for the restoration of the steep slopes by seed attached ripping net revegetation methods. In general, steep slopes with decomposed granite soils and ripping rock are easy to erode by precipitation and impossible to revegetate only using hydroseeding with core net mulching because of poor soil fertility. The Seed Attached Ripping Net Revegetation Methods(SALNRM) will be the most popular and sustainable methods to restore decomposed granite soils and ripping rock exposed slopes. The main results are summarized as follows; 1. The net size with $1.5cm{\times}1.0cm$ density was more suitable for growing plants, and increasing the ratio of the slow release fertilizer was better to make early coverage and to grow germinated plants. 2. The fertilizer bag made by the ratio of Peatmose : Vermiculite : Perlite : Quick release fertilize r : Slow release fertilizer = 10 : 2 : 5 : 3 : 4 (v : v) was the best for plant's growth. 3. According to the seed mixture experiments, even though not using foreign grasses, the SALNRM using native plants can make diverse plant composition. 4. The SALNRM will make same early ground coverage by only using native plants like using foreign grasses. The SALNRM would become the popular revegetation methods to restore decomposed granite soils and ripping rock exposed slopes in Korea.

• Journal of Environmental Impact Assessment
• /
• v.23 no.1
• /
• pp.39-50
• /
• 2014

In recent years, the frequency and scale of the natural disasters are growing rapidly due to the global climate change. In case of the urban flooding, high-density of population and infrastructure has caused the more intensive damages. In this study, we analyzed the spatial characteristics of urban flooding damage factors using GWR(Geographically Weighted Regression) for effective disaster prevention and then, classified the causes of the flood damage by spatial characteristics. The damage factors applied consists of natural variables such as the poor drainage area, the distance from the river, elevation and slope, and anthropogenic variables such as the impervious surface area, urbanized area, and infrastructure area, which are selected by literature review. This study carried out the comparative analysis between OLS(Ordinary Least Square) and GWR model for identifying spatial non-stationarity and spatial autocorrelation, and in the results, GWR model has higher explanation power than OLS model. As a result, it appears that there are some differences between each of the flood damage areas depending on the variables. We conclude that the establishment of disaster prevention plan for urban flooding area should reflect the spatial characteristics of the damaged areas. This study provides an improved understandings of the causes of urban flood damages, which can be diverse according to their own spatial characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5412-5419
• /
• 2011

The need is growing for high-speed spindle because various equipment are becoming more precise, miniaturization and high speed with the development of industries. Air-lubricated dynamic bearings are widely used in the optical lithographic manufacturing of wafers to realize nearly zero friction for the motion of the stage. Air-lubricated dynamic bearing can be used in high-speed, high-precision spindle system and hard disk drive(HDD) because of its advantages such as low frictional loss, low heat generation, averaging effect leading better running accuracy. In the paper, numerical analysis is undertaken to calculate the performance of air-lubricated dynamic bearing with herringbone groove. The static performances of herringbone groove bearings which can be used to support the thrust load are calculated. Electrochemical micro machining($EC{\mu}M$) which is non-contact ultra precision machining method has been developed to fabricate the air-lubricated dynamic bearing and optimum parameters which are inter electrode gap size, concentration of electrolyte, machining time are simulated using numerical analysis program.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.101-106
• /
• 2009

In this paper, Thin films of $HfO_2$/Hf were deposited on p-type wafer by Atomic Layer Deposition (ALD). We studied the electrical and material characteristics of $HfO_2$/Hf/Si MOS capacitor depending on thickness of Hf metal layer. $HfO_2$ films were deposited using TEMAH and $O_3$ at $350^{\circ}C$. Samples were then annealed using furnace heating to $500^{\circ}C$. Round-type MOS capacitors have been fabricated on Si substrates with $2000\;{\AA}$-thick Pt top electrodes. The composition rate of the dielectric material was analyzed using TEM (Transmission Electron Microscopy), XRD (X-ray Diffraction) and XPS (X-ray Photoelectron Spectroscopy). Also the capacitance-voltage (C-V), conductance-voltage (G-V), and current-voltage (I-V) characteristics were measured. We calculated the density of oxide trap charges and interface trap charges in our MOS device. At the interface between $HfO_2$ and Si, both Hf-Si and Hf-Si-O bonds were observed, instead of Si-O bond. The sandwiched Hf metal layer suppressed the growing of $SiO_x$ layer so that $HfSi_xO_y$ layer was achieved. And finally, the generation of both oxide trap charge and interface trap charge in $HfO_2$ film was reduced effectively by using Hf metal layer.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.145-155
• /
• 2015

Fiber morphology and basic characteristics of Legi bamboos (Gigantochloa atter) growing on Yogyakarta were studied considering their age and height positions in the culms. Culms of 4, 16, and 40 months were harvested, and their total lengths were measured. The length, diameter, and wall thickness of each internode were measured. All the sample culms were divided into three different parts along the height, and their fiber dimension and physical properties were observed. The data obtained were analyzed by analysis of variance. The results showed that the culms had a diameter of 5.8 to 10.8 cm. The lowest internodes always showed the shortest length and the thickest wall. The culms had an average fiber length of 2.41 mm and Runkel ratio of 0.61. Fiber length was affected by the height, while fiber diameter, lumen diameter, and fiber wall thickness were affected significantly by the age of the culms. The culms had high green moisture content (GMC) of 157.89%, and basic density (BD) of $456.67kg.m^{-3}$, a total longitudinal shrinkage of 0.35%, and relatively low R/T shrinkage ratio. The interactions between age and height were affected GMC and BD.