• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.67-84
• /
• 2002

A shallow high-resolution seismic reflection survey was carried out at the Mineopo tidal flat on the western coast of Korea. The purpose of the survey was to investigate shallow sedimentary structure of the tidal (fat associated with the recent sea level change. A total of 795 shots were generated at 1 m interval from a 5-kg hammer source and recorded on 48 channels of 100 Hz geophones along two mutually perpendicular profiles. The water-saturated ground condition resulted in suppressed ground rolls by significantly decreasing rigidity. In addition, seismic velocities over 1500 m/s provided easy segregation of reflected arrivals from lower velocity noise. As a consequence, seismic sections were created that are high in resolution and signal to noise ratio as well. The stack sections show that the tidal flat consists of 5 sedimentary sequences above acoustic basement. Although deposition is largely characterized by the transgressive sedimentary facies resulting from sea level rise, erosional surfaces are well-resolved within the sequences.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.19-27
• /
• 2005

For continuous communication between moving vehicles such as satellites and unmanned aerial vehicles, an antenna system having at least more than 2-axes is needed. When the antenna is mounted on a moving vehicle such as ground vehicle, ship and so on, a stabilization and tracking system must be equipped to compensate the roll, pitch and yaw motion of the vehicle. The performance of stabilization and tracking system mainly depends on the servo control system that driving the antenna pedestal. Therefore, in this paper, a Fuzzy-PID controller for a stabilization and tracking system of a 2-axes antenna was designed and the performance was verified. To verify the verification of designed servo control system, the performance of the conventional PID controller and that of the Fuzzy-PID controller, designed by the same PID control gains, was compared.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.223-230
• /
• 2011

The purpose of this study was to analysis the effect of form and hardness of outsoles on the motion of the lower extremity joints and on foot pressure during gait. The subjects were 15 women(mean age, $48.5{\pm}2.4$ years), who had no serious musculoskeletal, coordination, balance or joint/ligament problems within 1 year prior to the study. The pelvic tilt, joint angles at the lower extremities and the vertical ground reaction force(GRF) were compared during gait with 3 types of shoes (A, B, C) by using one-way repeated ANOVA(p<.05). During gait, the peak tilt angle and the range of motion(ROM) of the ankle and knee joints were found to be significantly different among the 3 types of shoes. The type C shoes showed a significantly lower mean second maximum vertical GRF than types A and B. The curved outsoles of type C shoes, which had a form and hardness different from those of A and B, was designed strategically for walking shoes to provide stability to the Additionally, type C induced the dispersion of eccentric pressure and made the center of pressure roll over to the center line of the foot.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.3
• /
• pp.253-262
• /
• 2010

The electrical power system (EPS) of Korean satellites in low-earth-orbit is designed to achieve energy balance based on a one-orbit mission scenario. This means that the battery has to be fully charged at the end of a one-orbit mission. To provide the maximum solar array (SA) power generation, the peak power tracking (PPT) method has been developed for a spacecraft power system. The PPT is operated by a software algorithm, which tracks the peak power of the SA and ensures the battery is fully charged in one orbit. The EPS should be designed to avoid the stress of electronics in order to handle the main bus power from the SA power. This paper summarizes the results of energy balance to achieve optimal power sizing and the actual trend analysis of EPS performance in orbit. It describes the results of required power for the satellite operation in the worst power conditions at the end-of-life, the methods and input data used in the energy balance, and the case study of energy balance analyses for the normal operation in orbit. Both 10:35 AM and 10:50 AM crossing times are considered, so the power performance in each case is analyzed with the satellite roll maneuver according to the payload operation concept. In addition, the data transmission to the Korea Ground Station during eclipse is investigated at the local-time-ascending-node of 11:00 AM to assess the greatest battery depth-of-discharge in normal operation.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.702-710
• /
• 1991

The effects of washing and desinewing on the composition, fuctional properties, storage stability and texture of spent layer meat were investigated. Spent layer meat subjected to treatments involving water washing, bicarbonate washing and desinewing showed increases in moisture content and decreases in protein content, hydroxyproline content and heme pigment content. Increases in salt extractable protein content and water holding capacity and decreases in buffering capacity and emulsifying capacity were also observed. The 2-thiobarbituric acid values of washed and desinewed samples increased slowly during storage indicated the increase in storage stability compared to the control. Sample rolls prepared from bicarbonate washed and desinewed thigh and drumstick meats were scored by trained sensory panelists as less tough than the products made of ground thigh and drumstick meats.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.105-112
• /
• 2009

Telemetry data is very important for the Launch Mission and Flight Safety Control during the Space Launch. In Naro Space Center, several telemetry stations such as a small station in the NARO space center, two stations in Jeju and a downrange station on a ship are deployed for the stable acquisition/receiving of the telemetry signals. In this paper, the Link Margin and Reliability for the telemetry are analyzed to evaluate the probability of the signal receiving of each station. Even though the proper analysis is to using the on-board EIRP(Effective Isotropic Radiation Power) values in the direction of the ground station considering the predicted flight trajectory and the locations of the stations, the global EIRP of 95% spatial coverage has been used for the analysis, due to the limitation of the available data.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.63-74
• /
• 2012

In Korea, grouting has been mostly designed and constructed by experiences without expert knowledge and theoretical study. So there are a lot of problems related to the quality and safty of grouting. Therefor, in this paper the quality management skills and method were discussed through out by using the auto-grouting method and field test of grouting for the construction. Through the limit water injection test of the soil, it make the optimum injection pressure and injection speed of grouting, and through the lugeon test of the rock, it make assess the permeability of before and after grouting. In order to prevent the hydraulic fracture of soil and break away from the grouts if it apply four kinds of mode of grouting stop criteria, injection effects can be improved. From the above characteristcs designers evalute the fitness values of injection pressure(p), injection speed(q) and grouting penetration time(t). So far, to record and manage pressure(p) and speed(q) of grouting autographic devices such as intergation flow-meter usually record data in a roll of paper. Intergration flow-meter can record grouting flow quantity exactly, but the recorded pressures differ from the any basis such as intitial, intermediate and final point. Therefore, it has been argued that is a need of reliable method to describe the connection between the pressure recorded by an intergration flow-meter and the special properties of the grouting target ground. auto-grouting method can describe the reliable connection between the grouting pressure and the special properties of the grouting target ground. So, in this paper by using auto-grouting method, it is expected that to secure basis of quality control techniques construction.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.1
• /
• pp.98-110
• /
• 1994

The fauna of spider species inhabited near paddy fields have been investigated in Chinju and Namhae areas. The spiders collected near the paddy fields in Chinju and Namhae areas were 34 species of 31 genera belonging to 10 families: 34 species on paddy levees; 16 species on barley fields; 17 species on fallow fields; and 18 species on paddy fields. The species diversity was the highest on paddy levee. The dominant species collected from each habitat near the paddy fields were Pardosa astrigera on the paddy levees and barley fields, Pirata subpiraticus on the fallow field, and Pachygnatha clercki on the paddy fields. The spiders inhabited near rice fields can be classified into nine groups based on the ecological and taxonomical characteristics: 1. Pirata spp. 2. Pachygnatha clercki 3. Teridiidae, Erigonidae, Linypidae 4. Tetragnatha spp. 5. Dolomedes surfureus 6. Pardosa spp. 7. Salticidae 8. Thomisidae 9. Clubionidae Among the nine spider groups, the spiders belong to the group 1-5 prefered wet ground or paddy to dry ground, in contrast to the group 6-9 which prefered to live on dry land. The difference of the habitat preference indicated that the former five groups do the important roll as pest predators in paddy, while the latter four group mainly suppress the overwintering pest populations on paddy levees.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.98-108
• /
• 2009

The purpose of this study is to analyze the characteristics of limited methods, economics and breeding appropriateness of native and imported ground cover plants in the methodology of a shallow soil rooftop garden. The new shallow soil rooftop gardening method uses a total of 13cm in soil thickness, including 4.5cm of top soil on a 7.5cm rock-wool-mat stacked onto a 1cm roll-type-draining plate. The total construction cost for each method of soil level within the design price standard for SEDUM BLOCK is 89,433won/$m^2$, and for DAKU is 92,550won/$m^2$. By comparing those two methods, the construction cost of the shallow soil artificial foundation methodology is 45,000won/$m^2$; this shows the new method is 50% less expensive than the existing method of shallow soil rooftop gardening. The experiment was executed on the rooftop of the Korean National Housing Corporation to ensure validity of the shallow soil artificial foundation planting, and the sample plants which were imported and grown now in native covering. A list investigating the growing plants was made of the cover rate in each plant class, both while alive and the dry plant weight. The native ground cover plants, Sedum kamtschaticum, Sedum middendorffianum, Allium senescens, Sedum sarmentosum, Aquilegia buergariana, and Caryopteris incana increased the cover rate, live weight and dry weight in the shallow soil artificial foundation method. Among the imported cover plants, Sedum sprium and Sedum reflexum, the cover rate increased and growth conditions improved. However, some species needed weed maintenance. After examination with the less expensive shallow soil artificial foundation method and growth analysis, it was found that rooftop gardens are a low-cost option and the growth of plants is great. This result shows the new method can contribute to the proliferation of rooftop gardens in urban settings.

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.35-39
• /
• 2002

This study was conducted to investigate the effect of early $CO_2$ enrichment during seedling stage on long-term $CO_2$ enrichment after transplanting in the culture of pat-choi (Brassica campesris L), spinach (Spinacia oeracea L.), and leaf lettuce (Lactuca saliva L). During seedling stage, $CO_2$enrichment had significantly higher fresh and dry weight and leaf area of the top parts (above ground) of all three plant species than the control (no $CO_2$ enrichment). About 53%, 70% , and 40% increase in fresh weight of the top parts of pak-choi, spinach, and leaf lettuce were observed, respectively. Also, in seedling stage, dry weights of roots of spinach and leaf lettuce were significantly increased by early $CO_2$ enrichment. Relative fresh weight increment, compared with fresh weight of the control, in the top parts of roll three plants showed the highest values in 10 days after $CO_2$ enrichment treatment. In the long-term $CO_2$ enrichment experiment, early $CO_2$ enrichmented plants had 20% greater leaf area than the control in all three leafy vegetables. Fresh and dry weights of top parts of early $CO_2$-treated plants were also increased from 10 to 20%, as compared with the control plants. However, these increasement rates in the long-term $CO_2$ enrichment were lower than those seedling stage, which had 30-60% increment-rates. After transplanting, photosynthetic rate of each leafy vegetable in the control treatment slowly decreased, but those rates of early $CO_2$ enriched plants rapidly decreased.