• Bulletin of the Korean Chemical Society
• /
• 제22권6호
• /
• pp.616-622
• /
• 2001

Split-flow thin (SPLITT) cell Fractionation(SF) is a technique that allows separation of particulates and macromolecules into two fractions. A gravitational SF(GSF) system is constructed and tested for its applicability for separation of dust and ground water particulates. When tested with polystyrene latex particles, experimental data were in good agreements with theory. The 9.8 and 21.4㎛ polystyrene particles were successuflly separated in a continuous mode, where the mixture is continuously fed into the GSF channel allowing separation in a large sacle. The GSF system is successfully applied to continuous separation of dust and ground water particels based on the sedimentation coefficient, which is closely related to the particle size. The separations were confirmed by microscopy and energy-dispersive X-ray (EDX) analysos.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.215-222
• /
• 2004

This study was conducted to evaluate the characterization of airborne bioaerosol in public facilities in Seoul. A total of 17 public facilities were investigated from December, 2002 to February, 2003. As results of the survey, the mean concentrations of bacteria and fungi in indoor air of public facilities were $378.08\pm296.33$ CFU/㎥ by RCS and $106.38\pm171.63$ CFU/㎥ and $347.46\pm335.32$ CFU/㎥ and $95.23\pm62.61$ CFU/㎥, by Six-stage cascade air sampler respectively. The mean concentrations of bacteria in indoor air (by ventilation method) were $517.14\pm343.93$ CFU/㎥ of natural ventilation and $215,83\pm100.71$ CFU/㎥ of mechanical ventilation. The mean concentrations of fungi in indoor air (by ventilation method) were $83.14\pm79.16$ CFU/㎥ of natural ventilation and $133.50\pm248.07$ CFU/㎥ of mechanical ventilation. The mean concentrations of bacteria in indoor air were 449.44 CFU/㎥ for the ground and $217.50\pm103.68$ CFU/㎥ for the underground. The mean concentrations of fungi in indoor air were $63.89\pm77.66$ CFU/㎥ for the ground and $202.00\pm290.08$ CFU/㎥ for the underground.

• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.449-460
• /
• 2022

Safe underground construction in a rock mass requires adequate ground investigation and effective determination of rock conditions. The estimation of rock mass behavior is difficult, because rock masses are innately anisotropic and heterogeneous at different scales and are affected by various environmental factors. Quantitative rock mass classification systems, such as the Q-system and rock mass rating, are widely used for characterization and engineering design. The measurement of rock classification parameters is subjective and can vary among observers, resulting in questionable accuracy. Geophysical investigation methods, such as seismic surveys, have also been used for ground characterization. Torsional shear wave propagation characteristics in cylindrical rods are equal to that in an infinite media. A probabilistic quantitative relationship between the Q-value and shear wave velocity is thus investigated considering long-wavelength wave propagation in equivalent continuum jointed rock masses. Individual Q-system parameters are correlated with stress-dependent shear wave velocities in jointed rocks using experimental and numerical methods. The relationship between the Q-value and the shear wave velocity is normalized using a defined reference condition. This relationship is further improved using probabilistic analysis to remove unrealistic data and to suggest a range of Q-values for a given wave velocity. The proposed probabilistic Q-value estimation is then compared with field measurements and cross-hole seismic test data to verify its applicability.

• Wind and Structures
• /
• 제3권3호
• /
• pp.143-158
• /
• 2000

This report presents the findings of a one-year monitoring effort to empirically characterize and evaluate the nature of near-ground winds for structural engineering purposes. The current wind engineering practice in the United States does not explicitly consider certain important near-ground wind characteristics in typical rough terrain conditions and the possible effect on efficient design of low-rise structures, such as homes and other light-frame buildings that comprise most of the building population. Therefore, near ground wind data was collected for the purpose of comparing actual near-ground wind characteristics to the current U.S. wind engineering practice. The study provides data depicting variability of wind speeds, wind velocity profiles for a major thunderstorm event and a northeaster, and the influence of thunderstorms on annual extreme wind speeds at various heights above ground in a typical rough environment. Data showing the decrease in the power law exponent with increasing wind speed is also presented. It is demonstrated that near-ground wind speeds (i.e., less than 10 m above ground) are likely to be over-estimated in the current design practice by as much as 20 percent which may result in wind load over-estimate of about 50% for low-rise buildings in typical rough terrain. The importance of thunderstorm wind profiles on determination of design wind speeds and building loads (particularly for buildings substantially taller than 10 m) is also discussed. Recommendations are given for possible improvements to the current design practice in the United States with respect to low-rise buildings in rough terrain and for the need to study the impact of thunderstorm gust profile shapes on extreme value wind speed estimates and building loads.

• 한국수산과학회지
• /
• 제49권3호
• /
• pp.270-276
• /
• 2016

This study investigated the sensory characteristics (texture, odor, taste and color) of jerky produced from ground sea rainbow trout (SRT) Oncorhynchus mykiss frame muscle (FM). The hardness of the ground SRT-FM jerky was 453.9±91.0 g/cm², which was lower than that of commercial animal jerky (893.5±404.6 g/cm²) and commercial fish jerky (1,394.4±363.5 g/cm²). The difference in the hardness values of the ground SRT-FM jerky and commercial animal jerky was not significant. The volatile basic nitrogen content of the ground SRT-FM jerky was 48.3±1.6 mg/100 g, which was higher than that of commercial fish jerky (21.6±6.2 mg/100 g) and commercial animal jerky (18.2±6.3 mg/100 g). However, the fish odor of the ground SRT-FM jerky was masked by the presence of various additives. The hydrophilic and lipophilic browning indices of the ground SRT-FM jerky were higher than those of the commercial jerky. The total taste value of the ground SRT-FM jerky was 169.0, and the major amino acids were glutamic acid and aspartic acid. These results suggest that ground SRT-FM jerky would be acceptable to consumers.

• 분석과학
• /
• 제22권1호
• /
• pp.75-81
• /
• 2009

흐름 장-흐름 분획법을 개선한 방식의 흐름 장-흐름 분획장치를 이용하여 아주 적은 농도의 입자를 포함하는 지하수의 실험이 가능하였다. 또한 침강 장-흐름 분획법을 조합하여 상대적으로 크기가 큰 입자들을 분리함으로써 보다 넓은 영역의 입자들을 분리 및 분석할 수 있었다. 이렇게 장-흐름 분획법을 이용한 환경적인 측면의 연구의 가능성을 확인하였다. 각 시료의 크기 별 분포를 비교하고 크기별 분리를 확인하고자 광학 현미경을 사용하였다. 실험의 결과들은 입자크기분포를 결정하기 위한 가능성을 보여주었다. 다양한 분석 기술들의 조합으로 인해 그 효율성이 매우 증대할 수 있다는 것을 확인하였다. 또한, 본 연구를 통하여 입자 크기별 분리를 위한 장-흐름 분획법의 응용 가능성을 충분히 확인할 수 있었다. 앞으로 더욱 세밀한 실험과 시스템의 최적화에 노력을 기울인다면 흐름 장-흐름 분획법의 여러 부수 기술들을 조합하여 자연수 내의 입자들을 분리하고 분석할 수 있는 표준분석방법을 개발하고 제시할 수 있을 것으로 기대된다.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.404-410
• /
• 2008

In order to obtain 'value added products' from polypropylene (PP)/waste ground rubber tire powder (WGRT) composites, PP/WGRT microcellular foams were prepared via supercritical carbon dioxide. The effects of blend composition and processing condition on the cell size, cell density and relative density of PP/WGRT micro-cellular composites were studied. The results indicated that the microcellular structure was dependent on blend composition and processing condition. An increased content of waste ground rubber tire powder (WGRT) and maleic anhydride-grafted styrene-ethylene-butylene-styrene (SEBS-g-MA) reduced the cell size, and raised the cell density and relative density, whereas a higher saturation pressure increased the cell size, and reduced the cell density and relative density. With increasing saturation temperature, the cell size increased and the relative density decreased, whereas the cell density initially increased and then decreased.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.13-17
• /
• 2014

In this paper, the risk of electric shock is analyzed through analysis for characterization of potential distribution analysis and ground fault current analysis near the area where there are occurred a ground fault at electric vehicle wireless charging system using 20kHz. Studies for electric vehicle wireless charging system are in the works for development of efficiency increase, pickup shape design and communication module as a fundamental research step. But the research related to electrical safety and is still scarce state so that more studies are necessary to commercialize. As a result of analysis, it is verified that induced voltage is arisen more up to 45V near the a area of accident during ground fault and fault current has been maintained continuously without clearing fault condition by operating characteristics for circuit breaker and inverter.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.429-432
• /
• 2005

Geophysical investigations, as a non-invasive method, were conducted at the former gas station site contaminated with fuel hydrocarbons. GPR (Ground Penetrating Radar) survey was performed to locate buried objects such as USTs (Underground Storage Tanks) and fuel pipes which might serve as a origin of the site contamination. Additional GPR investigation and a resistivity survey were conducted to map water table and to characterize shallow geologic structures of the site. The results of the study have shown that seven USTs including one unknown UST and buried fuel pipes are present, and that the groundwater elevation varies with topography from approximately 1.5 to 3m below the surface and the water table is located in the residual soils above the bedrock in the site. The results also show that the geophysical methods can be a very useful tool for the characterization of the contaminated site.

• 마이크로전자및패키징학회지
• /
• 제4권2호
• /
• pp.25-32
• /
• 1997

대용량, 고속 정보처리가 요구되는 System의 모듈은 Data 처리의 고속성 및 회로의 고집적이 가능한 MCM의 형태로 구현되어 ATM, GPS 및 PCS 등의 분야에 광범위하게 응 용되고 있다. 위와 같은 High Speed 응용분야에서의 System 성능은 Interconnect Line의 전달지연, 임피던스 부정합에 의한 신호 반사 손실. 신호선 간의 Crosstalk, Ground Bounce 등의 현상에 대한 최적화 여부에 결정적인 영향을 받는다. 그러나 Interconnect의 특성상 정 형이 존재하지 않으므로 추상적인 Library를 구축하는 형식으로 접근할 수밖에 없으며 이를 위하여 여러기본 구조를 정의한후 각 Dimension을 변수로 두고 해석 결과를 합성하여 Database화하는 접근방식이다. 본 논문에서는 MCM-D 공정을 이용하여 Interconnect Line 특성을 분석하고 Database화 하기 위한 Test Pattern을 구현하고 Time Domain reflectometry(TDR)을 이용하여 그특성들을 측정 분석하였다. Test pattern 제작은 MCM-D 공정으로 최소선폭 27$\mu$m, Via Hole 75$\mu$m으로 형성하였고 2 Layer Signal과 GND로 총 3Layer를 구현하였다. 특성분석을 위해 TDR장비와 모데링 및 Simulation S/W인 IPA 510 을 사용하였다. 이를 통해 MCM-D를 이용한 공정에서 Interconcet Line의 고주파 특성을 측정하고 정량화하여 LIbrary를 제작할수 있었다.