• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.149-154
• /
• 1990

Before benefication of Okchun feldspar, all kinds of Fe-compounds and mafic minerals which were included in feldspar were studied. Also to produce 30/140mesh products as glass materials, optimum grinding condition and degree of liberation were studied. Fe-compounds were Biotite and Limonite, and these were existed along the cleavage. Optimum grinding time was 2min. and at this time weight percent of 30/140mesh products was 72.7% and degree of liberation at this particle size was 91.5%.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.684-685
• /
• 2006

In the present study, the powder metallurgical fabrication of $Bi_{0.4}Te_3Sb_{1.6}$ thermoelectric materials has been studied with specific interest to control the microstructure by the mechanical grinding process. The $Bi_{0.4}Te_3Sb_{1.6}$ thermoelectric powders with a various particle size distribution were prepared by the combination of the mechanical milling and blending processes. The specific electric resistivity of the $Bi_{0.4}Te_3Sb_{1.6}$ sintered bodies mainly depended on the orientation of the crystal structure rather than the particle size of the raw powders.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.804-811
• /
• 2019

This study was performed the real motion and DEM simulation of ball motion using three different types of grinding media with different size and materials in media formation for optimization of process conditions in a traditional ball mill (media ball mill). In the simulation, the rotational speed of the mill, the material of the medium, the velocity of the medium, and the coefficient of friction between the media and the wall of pot were fixed into the actual experimental conditions. The motion of various kinds of grinding media was quantitatively measured by setting the grinding zone defined in the present study on the photographs taken and the snapshot images analyzed in the simulation. In addition, we observed the quantitatively measured value and the changed morphology of the sample and examined the correlation. Therefore, it is suggested to optimize the grinding media which has the greatest influence on the grinding zone under specific experimental conditions.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.191-203
• /
• 2018

This study was investigated the effect of the morphology change of copper (Cu) powders under the different rotational speed and milling time by using three kinds of grinding media with different size and materials, and performed DEM simulations of ball behavior. In order to clarify the mechanism of grinding by three - dimensional simulations of the ball behavior in a traditional ball mill, the force, kinetic energy, and medium velocity of the grinding media were calculated. In the simulation, the amount of change of the input energy was also calculated by adjusting the rotational speed, ball material, kinetic velocity, and friction coefficient in the same as the actual experimental conditions. The scanning electron microscope results show that the particle morphology changes from irregular to spherical when the ball size is small.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.107-113
• /
• 2016

In this study, an anion-exchange ionomer solution was prepared by grinding poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) in liquid nitrogen for solid alkaline fuel cells (SAFCs). Type of quaternized PPO (QPPO) solutions was controlled by grinding time. The ionomer binder solutions were characterized in terms of dispersity, particle size, and electrochemical properties. As a result, ionomer binder solutions using grinded polymer showed higher dispersion and smaller particle size distribution than that using non-grinded polymer. The highest ionic conductivity and IEC of the membrane recast by using BPPO-G120s were $0.025S\;cm^{-1}$ and $1.26meq\;g^{-1}$, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.47-55
• /
• 2018

Talc, hydrous magnesium phyllosilicate, is one of the most popular industrial minerals due to their chemical stability and adsorptivity. While micro-sized talc has long been used as a filler and coating, nano-sized talc recently is attracting attention as additives for improving the stability of nanocomposites. In this study, we produced the nano-sized talc powder by mechanical method using high energy ball mill and investigated the changes in particle size and crystallinity with increasing milling time up to 720 minutes. X-ray diffraction results show that the peak width of talc gradually as the milling proceeded, and after 720 minutes of pulverization, the talc showed an amorphous-like X-ray diffraction pattern. Lase diffraction particle size analysis presents that particle size of talc which was ${\sim}12{\mu}m$ decreased to ${\sim}0.45{\mu}m$ as the milling progressed, but no significant reduction of particle size was observed even after grinding for 120 minutes or more. BET specific surface area, however, steadily increases up to the milling time of 720 minutes, indicating that the particle size and morphology change steadily as the milling progressed. Scanning electron microscope and transmission electron microscope images shows that layered particles of about 100 to 300 nm was aggregated as micro-sized particles after pulverization for 720 minutes. As the grinding time increases, the particle size and morphology of talc continuously change, but the nano-sized talc particles form micro sized agglomerates. These results suggest that there is a critical size along the a, b axes in which the size of plates is reduced even though the grinding proceeds, and the reduction of plate thickness along the c axis leads the increase in specific surface area with further grinding. This study could enhance the understanding of the mechanism of the formation of nano-sized talc by mechanical grinding.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.19-31
• /
• 2005

A study on the beneficiation of illite occurring in Youngdong province is performed with applying selective grinding and air classification techniques. Quartz and illite are occurred as major components, and sulfide minerals such as pyrite, chalcopyrite are associated as minor components. The result of sieving test shows that contents of Al₂O₃, K₂O and ignition loss are increased, whereas SiO₂ is decreased with particle size decrease. Fe₂O₃ content is almost same in all the particle size range but slightly lower at coarse particles. The yield of fine particles is increased with increasing rotor speed in both grinding stage and air classification stage. When the selective grinding and air classification are carried out at optimal condition, yield of the concentrate is 76.16 wt.%. The chemical compositions of the concentrate are SiO₂70.13%, Al₂O₃ 19.40%, Fe₂O₃ 1.62%, K₂O 5.20%, and ignition loss 2.77%. The beneficiation process developed in the current study is very effective method which purification and particle size control can be achieved simultaneously.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.705-708
• /
• 2001

The effect of grinding on the synthesis of LaAO$_3$ceramics was investigated. The mixture ground by plantary ball mill showed 70nm particle size (wet ball mill or unground=0.5 $\mu$m). Monophase LaAlO$_3$powders were formed when ground samples were heated at 100$0^{\circ}C$, however unground samples required temperatures above 130$0^{\circ}C$. Density of the ground samples sintered at 140$0^{\circ}C$ showed 98.3% of theoretical density (unground=93.5% at 150$0^{\circ}C$). Dielectric constant of the ground samples($\varepsilon$r=22.4) showed higher values than that of the unground samples($\varepsilon$r=20.32). Temperature coefficient of capacitance($\tau$$_{c}$) and dielectric loss (tan$\delta$) of the ground samples were similar to those of unground samples.s.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.1-6
• /
• 2005

Machining is a one of the broadly used manufacturing process to produce the parts, products and various molds and dies. The environmental impact due to aerosol generation via atomization process is a major concern associated with environmental consciousness. This paper presents the experimental results to analyze the characteristics of cutting fluid aerosol generation in grinding process. Experimental results show that the generated fine aerosol which particle size less than 10micron appears near worker's breath zone under given operational conditions. The aerosol concentration is much higher enough to affect human health risk with its generated aerosol quantities. This quantitative analysis can be provided the basic knowledge f3r further research for environmentally conscious machining technology developments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.282-287
• /
• 2005

This paper presents the experimental results to analyze the characteristics of cutting fluid aerosol generation in grinding process. Machining is a one of the broad manufacturing process to produce the parts, products and various molds and dies. The environmental impact due to aerosol generation via atomization process is a major concern associated with environmental consciousness. Experimental results show that the generated fine aerosol which particle size less than 10 micron appears near worker's breath zone under given operational conditions. The aerosol concentration is much higher enough to affect human health risk with its generated aerosol quantities. This qualitative analysis can be provided the basic knowledge for further research for environmentally conscious machining technology developments.