• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.343-354
• /
• 2017

Purpose: This paper evaluates the reliability of tapered grid couplings and presents test results through performance and life tests. Methods: The performance and life test method were presented by analyzing the failure modes for the tapered grid coupling. Zero failure test time was calculated to evaluate the reliability of tapered grid couplings and the test was performed under accelerated conditions. The nondestructive test and wear analysis using weighing were also carried out to check the failure modes of the field conditions. Conclusion: This study can be provided to improve the product reliability through failure analysis of a tapered grid coupling. The performance test results of before and after the accelerated life test were presented to confirm the improved reliability of the tapered grid coupling.

• Steel and Composite Structures
• /
• 제23권4호
• /
• pp.435-444
• /
• 2017

In the past, the progressive collapse resulting from local failures during accidents has caused many tragedies and loss of life. Although long-span spatial grid structures are characterised by a high degree of static indeterminacy, the sudden failure of key members may lead to a catastrophic progressive collapse. For this reason, it is especially necessary to research the progressive collapse resistance capacity of long-span spatial grid structures. This paper presents an evaluation method of important members and a novel dynamic analysis method for simulating the progressive collapse of long-span spatial grid structures. Engineering cases were analysed to validate these proposed method. These proposed methods were eventually implemented in the progressive collapse analysis of the main stadium for the Universiade Sports Center. The roof of the structure was concluded to have good resistance against progressive collapse. The novel methods provide results close to practice and are especially suitable for the progressive collapse analysis of long-span spatial grid structures.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.547-553
• /
• 2016

This paper presents the effect of a grid system on the performance of a small Savonius wind turbine installed side-by-side. Turbine performance is compared using three different grid systems; tetrahedral grid having a concentrated circular grid around turbine rotors, the tetrahedral grid having a concentrated rectangular grid around turbine rotors and the symmetric grid having a concentrated tetrahedral grid near the turbine rotor blades and a hexahedral grid. The commercial code, SC/Tetra has been used to solve the three-dimensional unsteady Reynolds-averaged Navier-Stokes analysis in the present study. The Savonius turbine rotor has a rotational diameter of 0.226m and an aspect ratio of 1.0. The distance between neighboring rotor tips keeps the same length of the rotor diameter. The variations of pressure and power coefficient are compared with respect to blade rotational angles and rotating frequencies of the turbine blade. Throughout the comparisons of three grid systems, it is noted that the symmetric grid having a concentrated tetrahedral grid near the turbine rotor blades and a hexahedral grid has a stable performance compared to the other ones.

• 한국측량학회지
• /
• 제34권6호
• /
• pp.569-578
• /
• 2016

With the recent advancement of surveying and technology, the spatial data acquisition rates and precision have been improved continually. As the updates of spatial data are rapid, and the size of data increases in line with the advancing technology, the LOD (Level of Detail) algorithm has been adopted to process data expressions in real time in a streaming format with spatial data divided precisely into separate steps. The existing GRID analysis utilizes the single DEM, as it is, in examining and analyzing all data outside the analysis area as well, which results in extending the analysis time in proportion to the quantity of data. Hence, this study suggests a method to reduce analysis time and data throughput by acquiring and analyzing DEM data necessary for GRID analysis in real time based on the area of analysis and the level of precision, specifically for streaming DEM data, which is utilized mostly for 3D geographic information service.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권2호
• /
• pp.77-86
• /
• 2024

본 연구에서는 콘크리트 보강재로 사용되는 철근의 대체제로써, 격자형 탄소보강재를 활용하기 위해 부착거동 특성을 파악하고자 하였다. 기존의 부착거동에 관한 수치해석 제안식에서는 격자형 탄소보강재의 횡방향 격자의 영향을 이해하기 어려운 실정으로, 비선형 3D모델을 제작하여 유한요소해석을 진행하였다. 해석 수행을 위하여 비선형 재료 모델의 입력과 격자형 탄소보강재와 콘크리트 사이의 부착계면 특성을 모델링하여 실제 직접인발시험 결과와 비교를 통하여 분석을 진행하였다. 격자형 탄소보강재의 부착거동 특성은 횡방향 격자의 요인에 매우 지배적인 것으로 나타났으며, 지속적인 하중 증가 경향을 보였다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제44차 하계학술발표논문집 19권2호
• /
• pp.83-86
• /
• 2011

2009년 7월 G8 확대정상회의에서 이태리와 공동으로 Smart Grid 선도국으로 한국이 지정되었다. 하지만 차세대 국가 성장 동력인 Smart Grid에 대한 사이버 공격 사례가 발생하고 있으며, 모의실험을 통해 보안 위협이 예측되고 있어, Smart Grid 공격을 분석하고, 안전성을 확보하기 위한 Smart Grid 보안기술에 대한 연구가 필요하다. 본 논문은 Smart Grid의 AMI, 네트워크 인프라, 시스템의 스마트 제어 및 스마트 서비스에 대한 보안성 분석과 램 공격, 주파수 크래킹, 악성코드 등의 공격과 취약점에 관한 연구를 한다. 그리고 Smart Grid 기술에 대한 공격을 방어 할 수 있는 보안 기술 및 보안 방법을 연구한다. 본 연구를 통해 Smart Grid에 대한 보안성을 강화하여 Smart Grid 보안기술 발전에 기여할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.91-92
• /
• 2011

Beat is a phenomenon, where the magnitudes and frequencies of the voltage and the current fluctuate. This paper describes a quantitative analysis of the beat phenomenon of a wind farm using the envelope of a current during intertie/grid fault conditions. In this paper, the ratio of the crest to the trough of the envelope curve and the time interval between adjacent troughs are defined and used to evaluate the beat phenomenon quantitatively. Beat phenomena under various fault and wind conditions are analyzed. The proposed quantitative analysis seems simple but effective in the more understanding of beat phenomenon of a wind farm, and thus can be used as a basis for operation and/or protection of an intertie.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.853-862
• /
• 2018

Frequency coupling in the phase domain is a recently reported phenomenon for phase locked loop (PLL) based three-phase grid-inverter systems. This paper investigates the mechanism and stabilization method for the frequency coupling to the stability of grid-inverter systems. Self and accompanying admittance models are employed to represent the frequency coupling characteristics of the inverter, and a small signal equivalent circuit of a grid-inverter system is set up to reveal the mechanism of the frequency coupling to the system stability. The analysis reveals that the equivalent inverter admittance is changed due to the frequency coupling of the inverter, and the system stability is affected. In the end, retuning the bandwidth of the phase locked loop is presented to stabilize the three-phase grid-inverter system. Experimental results are given to verify the analysis and the stabilization scheme.

• Steel and Composite Structures
• /
• 제18권2호
• /
• pp.395-408
• /
• 2015

The paper considers the free vibration analysis of FGM grid systems. Up to now, very little work has been done on this type of system and the paper aspires to fill this gap. Based on the hybrid-stress finite element formulation free vibration solutions for FGM grid systems of various aspect ratios, different types of gradations functions, and support conditions are determined. The tabulation of these results, not available thus far, should be useful to designers and researchers who may use them.

• 대한기계학회논문집B
• /
• 제29권5호
• /
• pp.568-576
• /
• 2005

A 3-D finite element model combined with a volume tracking method is presented in this work to simulate the mold filling for casting processes. Especially, the analysis involves an adaptive grid method that is created under a criterion of element categorization of filling states and locations in the total region at each time step. By using an adaptive grid wherein the elements, finer than those in internal and external regions, are distributed at the surface region through refinement and coarsening procedures, a more efficient analysis of transient fluid flow with free surface is achieved. Adaptive grid based on VOF method is developed in tetrahedral element system. Through a 3-D analysis of the benchmark test of the casting process, the efficiency of the proposed adaptive grid method is verified. Developed FE code is applied to a typical industrial part of the casting process such as aluminum road wheel.