• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.481-488
• /
• 2000

This study was initiated in order to find alternative fuel substituting for light oil the most common fuel for heating greenhouse. The tire oil used in this research was produced by pyrolysis process, one of the final products besides steel string and carbon black in which waste tires as a form of chopped pieces broken by shredding machine are heated up to 200~30$0^{\circ}C$ with maximum restraining of oxygen supply. In order to justify light oil equivalent qualities in tire oil combustion characteristics were defined in the way of comparing kinetic viscosities in the wide range of temperature flame sizes and exhaust gas components in the various combustion conditions. We found that kinetic viscosity of tire oil was lower than light oil by 1 to 2 cSt in the temperature range showing better flowing mobility in the fuel line of the burner and no significant difference in flame size between the two oils in the all combustion treatments. However much more NO and SO$_2$ were detected from the exhaust gases of tire oil than light oil combustions. In fact tire oil contains more nitrogen and total sulfur, by 25 times and 40 times respectively than light oil according to the composition analysis. Tolerable limit for SO$_2$discharge amount defined by the national air pollution standards is under 540ppm so tire oil combustion satisfies the requirement though. It is desirable if sulfur and nitrogen filtering process shall be added in the tire oil production line. Except the exhaust gas components all greenhouse heating qualities of tire oil including hot air temperature are very identical to those of light oil.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.753-761
• /
• 2014

Growth and flowering of Cymbidium 'Red Fire' and 'Yokihi' plants were examined in a greenhouse with cooling systems in summer, and with night interruption (NI) lighting in winter as a forcing culture system. The greenhouse was divided into two sections with separate cooling controls during the summer season. One section was cooled by a mist system (mist), while the other section was cooled by a shade screen (shade). During the winter, the greenhouse was redivided into three sections within each cooling system. Plants were grown with NI either at a low light intensity of $3-7{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(LNI) or a high l ight intensity of $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(HNI) u sing h igh-pressure sodium l amps during the 22:00-02:00 HR. The control plants were grown under 9 h short-day condition. NI for 16 weeks and cooling for 9 weeks were employed twice during the 2 years of the experimental period. The air temperature was approximately $2^{\circ}C$ lower in the mist than in the shade and the relative humidity was 80 ${\pm}5%$ in the mist compared to $55{\pm}5%$ in the shade. The daily light integral in the mist section was 48% higher than in the shade section. The time from initial planting to flowering pseudobulb emergence decreased with both LNI and HNI for both cultivars, regardless of the cooling treatments. Under NI conditions, however, between 60% and 1 00% of plants of both cultivars flowered in the mist, whereas no or 20% of 'Red Fire' or 'Yokihi' plants, respectively, flowered in the shade treatment over 2 years. Plants grown under the mist had bigger pseudobulbs than those grown in the shade under both NI treatments. These results show that commercial use of NI in winter and a mist cooling system in summer would decrease crop production time to 2 years and increase profits in Cymbidium forcing culture.

• Mycobiology
• /
• v.34 no.2
• /
• pp.67-72
• /
• 2006

Efficacy of resistance induction by the bacterial isolates Pseudomonas putida (TRL2-3), Micrococcus luteus (TRK2-2) and Flexibacteraceae bacterium (MRL412), which were isolated from the rhizosphere of plants growing in Jeju Mountain, were tested in a greenhouse. The disease severity caused by Phytophthora infestans was effectively reduced in the potato plants pre-inoculated with bacterial isolates compared with those of the untreated control plants growing in a greenhouse. In order to estimate the level of protection by the bacterial isolates, Mancozeb WP (Diesen $M^{(R)}$, Kyong nong) and DL-3-amino butyric acid (BABA) were pre-treated, whereas Dimethomorph WP ($Forum^{(R)}$, Kyong nong) and phosphonic acid ($H_{3}PO_{3}$) were post-treated the challenge inoculation with the pathogen. Disease severities of chemical pre-treated as well as post-treated plants were reduced compare to those of the untreated. The disease reduction in the plants pre-treated with Mancozeb WP was the highest, whereas that of post-treated with Dimethomorph WP was the lowest. The yields of plants pre-inoculated with three bacterial isolates were greatly increased than those of control plants. These results suggest that biological control by bacterial isolates might be an alternative strategy against late blight disease in potato plants growing in greenhouse.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.157-166
• /
• 2017

The Fuel Cell Electric Vehicle(FCEV) is recently evolving into a new trend in the automobile industry due to its relatively higher efficiency and zero greenhouse gas(GHG) emission in the tailpipe, as compared to that of the conventional internal combustion engine vehicles. However, it is important to analyze the whole process of the hydrogen's life cycle(from extraction of feedstock to vehicle operation) in order to evaluate the environmental impact of introducing FCEV upon recognizing that the hydrogen fuel, which is used in the fuel cell stack, is not directly available from nature, but instead, it should be produced from naturally available resources. Among the various hydrogen production methods, ${\sim}54.1%^{8)}$ of marketed hydrogen in Korea is produced from naphtha cracking process in the petrochemical industry. Therefore, in this study, we performed a well-to-wheels(WTW) analysis on the hydrogen fuel cycle for the FCEV application by using the GREET program from the US Argonne National Laboratory with Korean specific data. As a result, the well-to-tank and well-to-wheel GHG emissions of the FCEV are calculated as 45,638-51,472 g $CO_2eq/GJ$ and 65.0-73.4 g $CO_2eq/km$, respectively

• Journal of Life Science
• /
• v.11 no.3
• /
• pp.235-241
• /
• 2001

To select the sntagonistic bacteria against B. cinerea, isolates were screened from the eggplant leaves and rhizosphere soils in the eggplnat fields in the greenhouse. W1 and P99 isolates were selected by the inhibition of mycelial growth of B. cinerea E12 in vitro test. These isolates, W1 and P99, were identified as Bacillus subtilis and Pseudomonas putida, respectively, by the Bergeys manual and API systems, For the formulation of the antagonistic bacteria, the media for the mass production were prepared with biji(soybean curd residues) or soybean flour. B. subtilis W1 or P. putida P99 was mass cultured in biji broth or soybean flour extrect broth and then soybean flour, corn starch flour, rice glutinous flour and biji flour as high molecular substrates were added. These mixtures were dried, grinded and formulated as brofungicides of wettable powder type. The assess the control effect of biofungicides against the infection of B. cinerea, six types of formulations were assayed at the pot culturing with eggplant in the greenhouse. According to the results, there were no significant differences among the formulation methods. However, P99S or PppB formulated with P. putida P99 showed the highest control values as 90.4% and 96.1%, respectively. Then. BSB or BSD formulated whit B. subtilis W1 were 80.8% and 83.0%, respectively. There afforementioned values were more effective than that of chemical fungicide. Ipro W.P which showed as 72.6%.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.933-940
• /
• 2020

Land-use change matrix data is important for calculating the LULUCF (land use, land use change and forestry) sector of the national greenhouse gas inventory. In this study, land cover changes in 2004 and 2019 were compared using the Wall-to-Wall technique with a land cover map of Sejong City from the Ministry of Environment. Sejong City was classified into six land use classes according to the Intergovernmental Panel on Climate Change (IPCC) guidelines: Forest land, crop land, grassland, wetland, settlement and other land. The coordinate system of the land cover maps of 2004 and 2019 were harmonized and the land use was reclassified. The results indicate that during the 15 years from 2004 to 2019 forestlands and croplands decreased from 50.4% (234.2 ㎢) and 34.6% (161.0 ㎢) to 43.4% (201.7 ㎢) and 20.7% (96.2 ㎢), respectively, while Settlement and Other land area increased significantly from 8.9% (41.1 ㎢) and 1.4% (6.9 ㎢) to 35.6% (119.0 ㎢) and 6.5% (30.3 ㎢). 79.㎢ of cropland area (96.2 ㎢) in 2019 was maintained as cropland, and 8.8 ㎢, 1.7 ㎢, 0.5 ㎢, 5.4 ㎢, and 0.4 ㎢ were converted from forestland, grassland, wetland, and settlement, respectively. This research, however, is subject to several limitations. The uncertainty of the land use change matrix when using the wall-to-wall technique depends on the accuracy of the utilized land cover map. Also, the land cover maps have different resolutions and different classification criteria for each production period. Despite these limitations, creating a land use change matrix using the Wall-to-Wall technique with a Land cover map has great advantages of saving time and money.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.4
• /
• pp.336-341
• /
• 2024

In this study, the economic and environmental feasibility of seaweed by-products as livestock feed ingredients was evaluated. In the last three years (2021-2023), the estimated average annual production of domestic seaweed by-products, including processing residuals from sea mustard and kelp, was 210,000 tons. The economic feasibility analysis of using seaweed by-products as livestock feed indicated a net benefit of 482,237 KRW per ton. Additionally, substituting seaweed by-products at 0.25% 0.5%, 1%, and 2% in livestock compound feed generated net benefits of 6.5, 12.9, 25.9, and 51.7 billion KRW, respectively. The potential market value was analyzed from an environmental perspective by examining the greenhouse gas reduction potential of seaweed additives. By adding 2% laver, 2% sea mustard, and 0.25% sea mustard sporophyll to the feed, greenhouse gas emissions could be reduced by economic values estimated at 10.8, 11.4, and 15.6 billion KRW, respectively. The findings of this study suggest that the use of seaweed by-products livestock as feed ingredients can generate economic and environmental benefits.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1317-1317
• /
• 2024

As climate change escalates extreme weather events, the structural durability of plastic greenhouses, constituting 90% of Korea's facility agriculture, emerges as a critical issue. These greenhouses are pivotal for year-round crop cultivation and high-quality agricultural production. In 2021, collapses caused around US$2 million in damages, mainly due to heavy snowfall and strong winds, accounting for 97% of incidents. The Korean Ministry of Agriculture responded by disseminating disaster-resistant standardized designs, yet more robust standards are needed. Current designs rely on elastic analysis, but plastic greenhouses display nonlinear behavior due to factors like residual stress and local buckling. Our study employs a refined plastic hinge method and finite element analysis to analyze structures, considering progressive yielding. We conducted loading tests using scale down models of plastic greenhouses in accordance with similitude laws. Based on these tests, the deformation of models under different load conditions was measured and compared with the deformation of greenhouse using our nonlinear structural analysis. This study will contribute to the development of reliable design criteria for plastic greenhouses in response to climate extremes such as heavy snowfall and typhoons. In addition, by identifying the deformation characteristics of plastic greenhouses due to loads, it can contribute to establishing usability standards for greenhouses, and reinforcement measures for vulnerable areas which are easily deformed under load can be considered.

• Mycobiology
• /
• v.42 no.1
• /
• pp.66-72
• /
• 2014

Roselle (Hibiscus sabdariffa L.) family Malvaceae is an important crop used in food, cosmetics and pharmaceutics industries. Roselle is cultivated mainly in Upper Egypt (Qena and Aswan governorates) producing 94% of total production. Root rot disease of roselle is one of the most important diseases that attack both seedlings and adult plants causing serious losses in crop productivity and quality. The main objective of the present study is to identify and characterize pathogens associated with root rot and wilt symptoms of roselle in Qena, Upper Egypt and evaluate their pathogenicity under greenhouse and field condition. Fusarium oxysporum, Macrophomina phaseolina, Fusarium solani, Fusarium equiseti and Fusarium semitectum were isolated from the natural root rot diseases in roselle. All isolated fungi were morphologically characterized and varied in their pathogenic potentialities. They could attack roselle plants causing damping-off and root rot/wilt diseases in different pathogenicity tests. The highest pathogenicity was caused by F. oxysporum and M. phaseolina followed by F. solani. The least pathogenic fungi were F. equiseti followed by F. semitectum. It obviously noted that Baladi roselle cultivar was more susceptible to infection with all tested fungi than Sobhia 17 under greenhouse and field conditions. This is the first report of fungal pathogens causing root rot and vascular wilt in roselle in Upper Egypt.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.115-125
• /
• 2017

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear in fishing operation is generally related to hydrodynamic resistance on the gear. This research is to propose a low drag generated midwater trawl in terms of the gear design improvement using simulations. The results from the simulation were verified with results that mirrored the model experiments. From the results, the resistance force of the proposed gear decreased to 29% compared to that of the current gear. Furthermore, the gear performance also improved with increased gear mouth compared to the current one. Therefore, the proposed gear will be helpful to reduce the greenhouse gases from fishing operation. It will also contribute to the fishing industry by saving fuel.