• Computers and Concrete
• /
• 제10권2호
• /
• pp.95-104
• /
• 2012

This study uses recycled green building materials based on a Taiwan-made recycled mineral admixture (including fly ash, slag, glass sand and rubber powder) as replacements for fine aggregates in concrete and tests the properties of the resulting mixtures. Fine aggregate contents of 5% and 10% were replaced by waste LCD glass sand and waste tire rubber powder, respectively. According to ACI concrete-mixture design, the above materials were mixed into lightweight aggregate concrete at a constant water-to-binder ratio (W/B = 0.4). Hardening (mechanical), non-destructive and durability tests were then performed at curing ages of 7, 28, 56 and 91 days and the engineering properties were studied. The results of these experiments showed that, although they vary with the type of recycling green building material added, the slumps of these admixtures meet design requirements. Lightweight aggregate yields better hardened properties than normal-weight concrete, indicating that green building materials can be successfully applied in lightweight aggregate concrete, enabling an increase in the use of green building materials, the improved utilization of waste resources, and environmental protection. In addition to representing an important part of a "sustainable cycle of development", green building materials represent a beneficial reutilization of waste resources.

• 한국물환경학회지
• /
• 제23권2호
• /
• pp.216-221
• /
• 2007

The adsorption characteristics of malachite green on waste garnet have been investigated for its treatment from aqueous solution by employing waste garnet which is generated from the abrasive production process as an adsorbent. The influential factors examined were the initial concentration of malachite green in solution, reaction temperature, and the amount of adsorbent. Also, the effect of the modification of the surface of adsorbent on adsorption was examined. As the initial malachite green was increased with reaction temperature and the color removal of malachite green-containing solution was promoted with the amount of adsorbent. Finaly, increased adsorption of malachite green could be attained when the surface of glass was modified by hexamethyldisilazane.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권12호
• /
• pp.1728-1736
• /
• 2006

The effects of green tea (Camellia sinensis) waste silage and supplemental polyethylene glycol (PEG) on rumen fermentation and blood components were studied in cattle. Six Holstein steers were fed three diets in a 3${\times}$3 Latin square design, replicated twice. One diet was a control with no added silage, and the other two diets were supplemented (20% of the dry matter) with green tea waste silage either with (PEG) or without PEG (tea). Most of the fermentation parameters including major volatile fatty acids (VFA) were not affected by the diet treatments. The concentrations of high density lipoprotein cholesterol in the PEG group and urea nitrogen in the tea and PEG groups were greater than those in the control before morning feeding. The plasma 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid equivalent concentration was not different before morning feeding, but 3 h after morning feeding, its concentrations in both the tea and PEG groups were higher than in the control. Although the concentration of plasma vitamin A in the animals was not affected by feeding green tea waste silage, the concentrations of plasma vitamin E were significantly higher in the tea and PEG groups than in the control, both before and 3 h after morning feeding. The results from the present study suggest that feeding diets containing 20% of the dietary dry matter as green tea waste silage to Holstein steers has no negative impact on their ruminal fermentation, and increases their plasma antioxidative activity and concentration of vitamin E.

• Journal of Information Technology Applications and Management
• /
• 제27권5호
• /
• pp.35-47
• /
• 2020

Global waste has become a global issue and we can see the new trend of discovery businesses established to focus on solving the waste problem using new renewable energy technology and the circular economy business model. This paper aims to study factors that impact green entrepreneurship in Thailand, such as environmental concern, organizational environment, founder demographics, education background, entrepreneurship awareness, as well as external factors of a business. The study analyzes the data from three qualitative in-depth interviews with green entrepreneur founders who started the businesses in polymer up-cycling, waste management, and renewable energy. The study finds overseas educational background to be one of the key main drivers for the entrepreneurial courage to decide to pursue a new business venture. By having the exposure toward the different culture, three entrepreneurs hands-on experiential learning through three key drivers who are composed of the can-do attitude, the willingness to be self-employed, and the way of seeking for the freedom to express their passions.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.271-281
• /
• 2023

A study was conducted on the vitrification of the rare earth oxide waste generated from the PyroGreen process. The target rare earth waste consisted of eight elements: Nd, Ce, La, Pr, Sm, Y, Gd, and Eu. The waste loading of the rare earth waste in the developed borosilicate glass system was 20wt%. The fabricated glass, processed at 1,200℃, exhibited uniform and homogeneous surface without any crystallization and precipitation. The viscosity and electrical conductivity of the melted glass at 1,200℃ were 7.2 poise and 1.1 S·cm^-1, respectively, that were suitable for the operation of the vitrification facility. The calculated leaching index of Cs, Co, and Sr were 10.4, 10.6, and 9.8, respectively. The evaluated Product Consistency Test (PCT) normalized release of the glass indicated that the glass satisfied the requirements for the disposal acceptance criteria. Furthermore, the pristine, 90 days water immersed, 30 thermal cycled, and 10 MGy gamma ray irradiated glasses exhibited good compressive strength. The results indicated that the fabricated glass containing rare earth waste from the PyroGreen process was acceptable for the disposal in the repository, in terms of chemical durability and mechanical strength.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.512-520
• /
• 2011

본 연구에서는 탄화과정 중에 탄화로에서 발생되는 폐열을 활용하기 위해서 친환경건조시스템을 개발하여 그 특성을 검토하였다. 친환경건조시스템은 화석연료를 전혀 이용하고 있지 않고, 버려지는 폐열을 이용하기 때문에 환경친화적이다. 친환경건조시스템의 열원으로 이용되는 열수는 3개의 탄화로에 서로 연결되어 폐열을 회수하고 있고, 지속적인 열원의 공급으로 건조기내의 온도와 습도변화는 크지 않았다. 친환경건조시스템 설치가 목탄의 특성에 미치는 영향을 조사하기 위하여 고정탄소, 정련도, 경도, 발열량, pH, 단위중량당 발열량, 수탄율을 분석하였다. 그 결과로부터 친환경건조시스템 설치가 목탄의 특성에 크게 영향을 주지 않는 것으로 나타났다. 따라서 버려지는 폐열을 회수하여 에너지로 이용하는 친환경건조시스템은 에너지절감과 농산물의 건조품질을 향상시켜 농가의 수익을 극대화할 수 있는 효과가 있을 것으로 생각된다.

• Asian Journal of Business Environment
• /
• 제14권1호
• /
• pp.15-22
• /
• 2024

Purpose: The development of natural batik dyes based on a combination of coconut fiber waste and avocado leaves using the extraction method is important to support the green economy and reduce chemical waste in Indonesia. Research design, data and methodology: The research explores the use of coconut fiber and avocado leaf waste extraction as a natural batik dye and conducts market testing to assess consumer satisfaction. Results: Indonesian batik exports are growing, but synthetic dye practices are causing a decline in demand. To address this, natural dyes are being explored, including coconut fiber waste and avocado leaf waste. Conclusion: Test results from washing at 40 degrees Celsius in terms of color changes and color staining, from sweat in terms of changes in acid color and changes in base color, to sunlight in terms of color fastness value, to heat to iron in terms of color change and color staining shows a value of 3-4 (quite good) and 4-5 (good), meaning that coconut fiber and avocado leaves waste can be used as natural batik dye.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.246-263
• /
• 2011

Mankind has just begun to recognize that the most crucial factor to achieve the sustainable society in the future is green technology. Most countries support the development of green technology to prevent catastrophes from global warming, mainly in the areas of reducing carbon dioxide from the atmosphere. However, most products we consume in everyday life are produced through chemical processes, and we often oversee the fact that the huge amount of waste and energy during these chemical processes will seriously influence our goal to achieve our future society sustainable. Thus the technologies to minimize the amount of disposed waste and energy consumption during chemical processes may be more important than to reduce the greenhouse gases. In this regard this review introduces the recent status of green chemistry and future prospects in order to help our chemists and engineers establish research projects based on the green chemistry principles.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.15-22
• /
• 1992

The reason for permanent shrinking of recycled castable refractories from alumino-silicate waste refractories was investigated and the method to control shrinking is suggested in order to increase maximum service termperature. The porosity of castable refractories with waste material as large aggregate decreases after heat treatment because the porosity of waste refractories is greater than the of green material, in which CaO around large aggregate penetrates into aggregate and promotes liquid phase sintering. The shrinking of recycled castable refractories resulted in the decrease in porosity can be controled by addition of green kaolin chamotte as large aggregate. The shrinking of recycled castable refractories caused by the differences in densities of mineral phases before and after heat treatment can be controled by addition of kyanite. The use of green kaolin chamotte and kyanite increases the service temperature of recycled castable refractories up to 1500$^{\circ}C$.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.53-71
• /
• 2018

Waste glass disposal causes environmental problems in the cities. To find a suitable green environmental solution for this problem low cost adsorbent in this study was prepared from waste glass. An effective new green adsorbent was synthesized by hydrothermal treatment of waste glass (WG), followed by acidic activation of its surface by HCl (WGP). The prepared adsorbent was characterized by scanning electron microscopy (SEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), and BET surface measurement. The developed adsorbent was used for the removal of heavy metals (Cd, Cu, Fe, Pb and Zn) from well water. Batch experiments were conducted to test the ability of the prepared adsorbent for the removal of Cd, Cu, Fe, Pb and Zn from well water. The experiments of the heavy metals adsorption by adsorbent (WGP) were performed at different metal ion concentrations, solution pH, adsorbent dosage and contact time. The Langmuir and Freundlich adsorption isotherms and kinetic models were used to verify the adsorption performance. The results indicated high removal efficiencies (99-100%) for all the studied heavy metals at pH 7 at constant contact time of 2 h. The data obtained from adsorption isotherms of metal ions at different time fitted well to linear form of the Langmuir sorption equation, and pseudo-second-order kinetic model. Application of the resulted conditions on well water demonstrated that the modified waste glass adsorbent successfully adsorbed heavy metals (Cd, Cu, Fe, Pb and Zn) from well water.