• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.397-404
• /
• 2010

The Currently, most cargos of container transshipment between Busan Port and New Port are transported over land, and the rest is transported by barge. This study estimated firstly the traffic between those ports through simulations in order to analyze the feasibility of container transshipment by barge. It forecasted annual profitability using determinants to affect on the barge business by the traffic, and then, discussed the feasibility. This study supposed the flexible scenarios with 50%, 60%, 80%, or 100% transshipment and the 25 monthly barge service numbers between two ports, and measured the influences of different factors according to the above various scenarios. And then the sales were evaluated by the different traffics and freights scenarios provided the business would be actually operated. Finally, Net incomes were simulated to analyze the feasibility of different scenarios by various traffics and freights. The net income should be positive to get the feasibility. To achieve this, the minimum traffic should be secured and the lowest freight per TEU should be determined. While all countries of the world is controlling CO2 emissions and emphasizes the green logistics, this study contributed to solve at the same time the problems about the pollution and the efficiency of transportation by reviewing positively the feasibility of barge transportation as an alternative to transportation overland.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.209-213
• /
• 2013

The expense Our country's land logistics system is becoming backlog day by day. The greenhouse gas which it discharges specially from the vehicle causes a ecocide and traffic expense to make. The traffic energy curtailment which the government enforces during that time and environment-friendly green goods policy lost the effect. Therefore, This research propose the car-ferri network which is the most effective logistics system substitutes the land logistics system. This research will contribute improving the north and south logistics network of Pusan and Seoul region and will be able to reduce a various goods expense.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.97-100
• /
• 2013

전 세계 국제무역거래의 80%가 해상운송으로 이루어지고 있음에 따라, 연 6%로 세계 컨테이너 물동량의 증가가 전망됨에 따라 선박기인 온실가스의 증가에 대한 관심과 규제가 강화되고 있다. 즉 IMO 제62차 해양환경보호위원회에서 선박기인 온실가스 규제방안으로 EEDI와 SEEMP를 도입, 현재 발효 중에 있으며, 각 국의 항만당국 또한 대기오염 등의 환경규제 정책의 일환으로 그린 또는 에코포트 정책을 수립하여 이행 중에 있다. 이러한 해운환경의 변화로 인하여 해운선사는 글로벌 경쟁력 강화와 환경규제에 대응하기 위하여, 선박의 대형화를 통한 규모의 경제 실현은 물론, 급등하는 유가와 환경규제에 대비하여 고 에너지효율 및 저탄소 선박에 대한 수요가 늘어나고 있다. 이에 일본, 싱가폴, 노르웨이 등 EU 국가 등의 해운 선진국들은 1990년대 후반부터 친환경 선박의 개발에 대한 국가적 프로젝트를 체계적으로 이행해 오고 있으며, 이를 통한 친환경 선박기술의 확보와 친환경 선박시장의 점유율을 높이고 있는 추세이다. 따라서 본 논문은 선진 해운국가들이 수행중인 친환경 선박개발의 현황에 대한 벤치마킹을 통하여 상대적으로 뒤쳐져 있는 우리나라 친환경 선박개발 방안을 위한 여러 정책적 제안을 하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.259-260
• /
• 2012

With increasing interest in alternative energy source for green growth, this document shows that the study of kite flight control is based on the concept of autonomous flight of kite can exploit the energy. Currently, prototype kite was designed and the purpose of its flight test, by manual flight control with Remote Controller, was performed for the feasibility of the full automatic flight control. For the future research, the test data should be collected through the many flight test under various environment.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.85-92
• /
• 2023

The hardware of an LED lighting control system for coastal lighting at coastal pier entrance consists of a power supply unit, an AVR control unit, a CLCD output unit, an LED control unit, a scenario selection switch unit, and an operation speed display unit. It is made of an 8-channel. The CPU used ATmega128 and the FET was used to control the current signal. To operate the CPU, DC 12V was converted to DC 5V using a regulator 7805. A heat sink was used to remove heat generated in the FET. By connecting the load LED module to the manufactured 8-channel LED lighting control system, the operation was confirmed through various production scenarios. In addition, a control system was designed to show the most suitable color for the atmosphere of the coastal pier according to the input value of temperature and illumination using a fuzzy control system. Computer simulation was then conducted. Results confirmed that fuzzy control did not need to store many data inputs due to characteristics of artificial intelligence and that it could efficiently represent many output values with simple fuzzy rules.

• Journal of Korean Port Research
• /
• v.6 no.2
• /
• pp.33-42
• /
• 1992

In this paper we investigate the motion response of a moored ship in the fluid region sheltered by inclined breakwaters. The matched asymptotic expansion technique is employed to analyze the wave fields scattered by the inclined breakwaters. Fluid domain is subdivided into the ocean, entrance and sheltered regions. Unknown coefficients contained in each region can be determined by matching at the intermediate zone between two neighboring regions. The wave field generated by the ship motion can be analyzed in terms of Green's function method. To obtain the velocity jump across the ship associated with the symmetric motion modes, the sheltered region is further divided into near field of the ship and the rest field. The image method is introduced to consider the effect of the pier near the ship. The integral equation for the velocity jump is derived by the flux matching between the inner region and the outer region of a moored ship. Throughout the numerical calculation it is found that the inclined angle width of entrance of breakwaters as well as the location of moored vessel play an important role in the motion response of a moored ship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.162-163
• /
• 2022

Maritime transportation is going to transfer to alternative fuels as a result of the worldwide demands toward decarbonization and tougher maritime emissions regulations. Methanol is considered as a potential marine fuel, which has the ability to reduce SOx and CO₂ emissions, reduce climate change effects, and achieve the objective of green shipping. This work proposes and combines the innovative combination system of direct methanol solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC), gas turbines (GT), and organic Rankine cycles (ORC) for maritime vessels. The system's primary power source is the SOFC, while the GT and PEMFC use the waste heat from the SOFC to generate useful power and improve the system's ability to use waste heat. Each component's thermodynamics model and the combined system's model are established and examined. The multigeneration system's energy and exergy efficiency are 76.2% and 30.3%, respectively. When compared to a SOFC stand-alone system, the energy efficiency of the GT and PEMFC system is increased by 19.2%. The use of PEMFC linked SOFC has significant efficiency when a ship is being started or maneuvered and a quick response from the power and propulsion plant is required.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.13 no.1
• /
• pp.16-22
• /
• 1976

Broadband operation of Y-junction microstrip circulator withlnonreciprocal device is predicteg by Rosenbaum using Bosma's Green function analysis. The anslysis has been modified to enable the scattering matrix and therefore the circulator bandwidth, to be found. The width of the coupling transmission lines is found to be a significant design parameter${\psi}$. A comparison of experimental and theoretical results for the 3-port junction shows that wide lines and a smaller 7.5U than usual disk radius can be used to obtain broadband operation. Circulator operates in the frequency band 5-11 GHz. The obtained maximum insertion loss is 0.5dB and the isolation is more than 15dB.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.289-296
• /
• 2009

All over the world more and more attention is being paid to green management which enables environment-friendly sustainable development. To keep up with these global trends and in response to the government's "low carbon green growth" policy, many efforts are being made in the port and logistics in order to drastically reduce carbon emissions and save operating expenses. To this end, the engine power source of the cranes in the container terminal is being replaced with electricity from fossil fuel. Among those cranes, especially e-RTGC has been proved to be practical and excellent in its performance through many previous studies. However, no empirical study has yet been made on its introduction effects when e-RTGC has been introduced to the container terminal. In the meantime, however, many domestic container terminals have introduced e-RTGC, and so some data have been accumulated for further research. Under these circumstances, this study has tried to make an empirical study through the case study of D container terminal, checking the restriction factors to be considered at the time of eURTGC introduction, and analyzing its introduction effects and problems. We have high expectations that this study will provide key consideration factors and empirical analysis data to the decision makers who plan to introduce an e-RTGC system, and also will be used as a reference to the development direction of e-RTGC.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2016

In various industries related with construction and military machinery, a large amount of power is normally required because such machinery operations, such as digging or breaking, take place under difficult working conditions in a rough environment. Thus, a hydraulic system needs to be applied as the major power transfer system. To produce and supply hydraulic power depending on the various load conditions, a hydraulic piston pump is utilized as a typical power source for a hydraulic system. In the present study, numerical simulations were conducted using the commercial program, Ansys CFX 14.5. To lubricate the moving parts as the pump starts to operate, a small amount of oil leaks out through the clearance between the orifice in the piston-shoe and the recess at the swash-plate. Taking this into consideration, a cylindrically shaped computational domain was modeled to maintain the same equivalent leakage area. To validate the numerical method applied herein, the numerical results of the flow rate at the discharge port were compared with the experimental data, and a good agreement between them was shown. Using the verified method, the effects of the discharge pressure and the angle of the swash-plate were also evaluated under several load conditions. The results of the present study can be useful information for a hydraulic piston pump used in many different manufacturing industries.