• Journal of Environmental Science International
• /
• v.25 no.11
• /
• pp.1475-1484
• /
• 2016

To analyze the cooling effect of urban green areas, we conducted micrometeorological measurements in these areas and their surroundings in Seoul, Korea. From the average hourly temperature measurements through each month for the last two years (March 2013 to February 2015), we found that the maximum temperature difference between urban and green areas was about $2.9^{\circ}C$ at 16:00 LST in summer, and the minimum was about $1.7^{\circ}C$ at 22:00 LST in winter. In summer, the temperature difference was the largest during the day, rather than at night, due mainly to shading by the tree canopy. The specific humidity difference between the two areas was about $1.5g\;kg^{-1}$ in summer, and this decreased in the winter. The specific humidity difference between urban and green areas in summer is relatively large during the day, due to the higher evapotranspiration level of biologically active plants.

• IMMUNE NETWORK
• /
• v.16 no.5
• /
• pp.311-315
• /
• 2016

A pandemic influenza A (H1N1) virus strain was isolated from a pig farm in Korea in December 2009. The strain was propagated in and isolated from both the Madin-Darby canine kidney cell line and embryonated eggs. The partial and complete sequences of the strain were identical to those of A/California/04/2009, with >99% sequence similarity in the HA, NA, M, NS, NP, PA, PB1, and PB2 genes. The isolated strain was inactivated and used to prepare a swine influenza vaccine. This trial vaccine, containing the new isolate that has high sequence similarity with the pandemic influenza A (H1N1) virus, resulted in seroconversion in Guinea pigs and piglets. This strain could therefore be a potential vaccine candidate for swine influenza control in commercial farms.

• Journal of Internet Computing and Services
• /
• v.12 no.1
• /
• pp.85-98
• /
• 2011

Recently, the world faces a global environmental crisis by the increase of energy consumption and global warming. Since the crisis directly affects political, economic, social, and environmental areas, many countries prepare Green ICT policy to overcome it. However, although Green IT policy provides many benefits by solving environmental pollution and increasing energy efficiency, Korean government did not prepare measures by the policy. The purpose of this study is to suggest priorities of political goals for maximizing the efficiency after introducing Green ICT policy in Korea. Major variables are drawn for the analysis, and they are eco-friendliness, technology evolution, economic efficiency, energy efficiency, and stable supply of energy. The variables are suggested based on 'Low Carbon, Green Growth Act', then the survey was conducted to policy expert using AHP(Analytic Hierarchy Process) and ANP(Analytic Network Process) for prioritizing variables. As a result of the AHP, it is derived in the order of eco-friendliness, technology evolution, economic efficiency, energy efficiency, and stable supply of energy. The ANP result shows in the order of technology evolution, energy efficiency, economic efficiency, eco-friendliness, and stable supply of energy. The research is conducted to analyze the priorities of goals for Green IT policy, and the analysis results are possible to use as a practical guideline for establishing associated policies in the future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1133-1151
• /
• 2010

Energy balanced consumption routing is based on assumption that the nodes consume energy both in transmitting and receiving. Lopsided energy consumption is an intrinsic problem in low-cost sensor networks characterized by multihop routing and in many traffic overhead pattern networks, and this irregular energy dissipation can significantly reduce network lifetime. In this paper, we study the problem of maximizing network lifetime through balancing energy consumption for uniformly deployed low-cost sensor networks. We formulate the energy consumption balancing problem as an optimal balancing data transmitting problem by combining the ideas of corona cluster based network division and optimized transmitting state routing strategy together with data transmission. We propose a localized cluster based routing scheme that guarantees balanced energy consumption among clusters within each corona. We develop a new energy cluster based routing protocol called "OECR". We design an offline centralized algorithm with time complexity O (log n) (n is the number of clusters) to solve the transmitting data distribution problem aimed at energy balancing consumption among nodes in different cluster. An approach for computing the optimal number of clusters to maximize the network lifetime is also presented. Based on the mathematical model, an optimized energy cluster routing (OECR) is designed and the solution for extending OEDR to low-cost sensor networks is also presented. Simulation results demonstrate that the proposed routing scheme significantly outperforms conventional energy routing schemes in terms of network lifetime.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.43-50
• /
• 2012

The Green Infrastructure Framework refers to an interconnected network formed by greenways that links gardens, parks, green spaces, streams, wetlands, agricultural lands, and green belts. Green infrastructure supports diverse functions to environment, provides various benefits to people, and helps in the community's health and viability. It can store stormwater runoff and abate its non-point source pollutants. Due to its advantages and profits, advanced countries in environment policies have adopted green infrastructure in planning and implementing urban and regional development. The Korean government and municipalities have focused upon grey infrastructure investment in the past, which causes occurrence of natural disasters such as draught, flood, and landslides, degradation of water and air quality, decline of biodiversity, and even inhibition of economic activities. In order to alleviate these problems, it is requested to formulate and implement policies for green infrastructure at the national government level. USA and Korean situation of green infrastructure were investigated; forty components of green infrastructure were drawn. Nine policies utilized in the USA cases were identified, which are applicable to Korea. Among them, five policies can be implemented in public sector and four in private one. The green infrastructure law needed in Korea was suggested. The amendments of laws regarding green infrastructure and alternatives expending it were proposed.

• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.89-107
• /
• 2012

Recently, the successful appointment of the general directorate of GCF (Green Climate Fund) in Songdo of Korea made a great history for the golden triangle with GGGI (global Green Growth Institute) and GTC (Green Technology Center). Now, Korea became the Mecca for the global green growth and it gave a great opportunity foe the Korea to lead the global economy in the future. However, to successfully manage the GCF, the Korean government should show their willingness as well as the readiness for the green prowth and green productivity. It is really hard for the Korea, since it takes the second rank for the growth rate of carbon dioxide emission in the world. To overcome this shameful status, it should make the best effort to promote the green productivity, especially in a field of logistics industry, because it takes 21% of global CO2 emission, the second largest portion. The research aims to systematically introduce the Global Malmquist-Luenberger Index (GML) and to evaluate the logistics industry of Korea based on the GML approach. It concludes the innovative technology is utmost important to improve the green productivity of the logistics industry and thus the Korean government should make more aggressive role to fill this missing link in the innovation network.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.1-10
• /
• 1996

In this paper, the problem of simultaneously allocating servers and loadings of stations in a class of manufacturing systems modelled as network of queues is considered. The throughput function of the closed network of queues is demonstrated as a Schur convex function of server allocation, that is, increasing the server allocation vector under majorization increases the performance in the ship in terms of the throughput. It also reduces the congestion in the open network of queues in terms of reducing the total number of jobs in the sense of likelihood ratio ordering. These are the extentions of the numerical results of Green and Guha (1995) in the service system with independent M/M/c systems to the network of queues. The results can be used to support production planning in certain manufacturing systems.

• Proceedings of the KOR-KST Conference
• /
• 2000.02a
• /
• pp.89-115
• /
• 2000

Traffic signal setting policies and traffic assignment procedures are mutually dependent. The combined signal control and traffic assignment problem deals with this interaction. With the total travel time minimization objective, gradient based local search methods are implemented. Deterministic user equilibrium is the selected user route choice rule, Webster's delay curve is the link performance function, and green time per cycle ratios are decision variables. Three implemented solution codes resulting in six variations include intersections operating under multiphase operation with overlapping traffic movements. For reference, the iterative approach is also coded and all codes are tested in four example networks at five demand levels. The results show the numerical gradient estimation procedure performs best although the simplified local searches show reducing the large network computational burden. Demand level as well as network size affects the relative performance of the local and iterative approaches. As demand level becomes higher, (1) in the small network, the local search tends to outperform the iterative search and (2) in the large network, vice versa.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.192-200
• /
• 2005

In this paper, an improved User Parameter Control (UPC) algorithm is proposed for controlling traffic in ATM networks. The present algorithm consists of Cell Buffer, Red Token Pool, Green Token Pool, and Spacer. A token is generated at a certain time period, and the tokens are consumed one each time a cell arrives. At this time, if the delay element, named Spacer, is empty, the cell comes into the network. On the other hand, if Spacer is not empty, the cell cannot come into the network. In addition, in the case that tokens do not exist in Token Pool, the corresponding cell is thrown away The arbitrary function of the token used in this paper is removed. Instead, the token is used only to control network traffic. This research proposes new UPC Algorithm to improve the current cell delay rate and cell loss rate by dynamically adopting the delay element, named Spacer, with respect to the traffic condition, which is different from controlling that the cell comes into the network after a certain delay time period.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.80-90
• /
• 1995

The scattering parameters of a microstrip single line, a right-angle bend and a coupled line are calculated using the multiport network model for the frequency range from 1 to 18 GHz. The single line is analyzed using the planar waveguide model. The right-angle bend is broken into two rectangular segments, and each segment is analyzed in a similar fashion as the single line. Impedance matrices corresponding to the two segments are combined by the segmentation method. In the analysis of elec- tromagnetic coupling of the coupled line, a new method is employed resulting in much less computation time than those previous methods involving Green's functions. A good agreement between the numerical results for the three structures and those from SuperCompact reveals the usefulness of the multiport network medel in analyzing complicated mirostrip single and coupled line discontinuities.