• 공업화학
• /
• 제29권3호
• /
• pp.253-257
• /
• 2018

DNA를 기반으로 한 금속 나노와이어는 전기적인 물성은 떨어지지만, 제작 방식이 간단하고, 대면적에서 대량으로 제작할 수 있으며, 유기 반응을 통해 분자 소자 제작의 기판으로도 사용가능한 차세대 재료로 전망된다. 본 총설에서는 DNA 금속화 반응을 이용한 나노와이어의 제작 및 3차원 구조체의 제작 기술에 대해 소개하고, 이와 관련한 연구 현황과 발전 방향에 대해 논의하고자 한다.

• The Plant Pathology Journal
• /
• 제39권3호
• /
• pp.265-274
• /
• 2023

Citrus black rot is a serious disease of citrus plants caused by Alternaria citri. The current study aimed to synthesize zinc oxide nanoparticles (ZnO-NPs) by chemically or green method and investigate their antifungal activity against A. citri. The sizes of synthesized as measured by transmission electron microscope of ZnO-NPs were 88 and 65 nm for chemical and green methods, respectively. The studied prepared ZnO-NPs were applied, in vitro and in situ, at different concentrations (500, 1,000, and 2,000 ㎍/ml) in post-harvest treatment on navel orange fruits to verify the possible control effect against A. citri. Results of in vitro assay demonstrated that, at concentration 2,000 ㎍/ml, the green ZnO-NPs was able to inhibit about 61% of the fungal growth followed by 52% of chemical ZnO-NPs. In addition, scanning electron microscopy of A. citri treated in vitro with green ZnO-NPs showed swelling and deformation of conidia. Results showed also that, using a chemically and green ZnO-NPs at 2,000 ㎍/ml in situ in post-harvest treatment of orange, artificially-infected with A. citri, has reduced the disease severity to 6.92% and 9.23%, respectively, compared to 23.84% of positive control (non-treated fruits) after 20 days of storage. The out findings of this study may contribute to the development of a natural, effective, and eco-friendly strategy for eradicating harmful phytopathogenic fungi.

• STI Policy Review
• /
• 제3권2호
• /
• pp.152-171
• /
• 2012

In April 2001, many Japanese national institutes were reorganized as Independent Administrative Institutions (IAI) based on the General Act for Independent Administrative Institutions and the act for each institution. Under the Ministry of Education, Culture, Sports, Science and Technology (MEXT), the National Institute for Materials Science (NIMS) was established by the merger of the National Research Institute for Metals (NRIM) and the National Institute for Research in Inorganic Materials (NIRIM). One of the biggest changes was the expansion of autonomous administration. The nanotechnology and material R&D field was prioritized in the 2nd (2001-2005) and the 3rd (2006-2010) Science and Technology Basic Plans; subsequently, NIMS was assigned to take the initiative in nanotechnology as well as materials science. NIMS has proactively expanded research fields through the introduction of researchers from polymers, electronics, and biotechnology as well as member institutes of the World Materials Research Institute Forum (WMRIF). Globalization has been promoted through programs that include the International Center for Young Scientists (ICYS) and the International Center for Materials Nanoarchitectonics (MANA). The 4th Science and Technology Basic Plan (2011-2015) emphasizes outcomes-recovery and rebirth from the disaster, green innovation, and life innovation. The Midterm Plan for NIMS also follows it. R&D collaboration by multi-partners (that include industry, university, and GRI) should be strategically promoted where GRI are especially required to play a hub function for innovative R&D and open innovation. NIMS highlights are Tsukuba Innovation Arena (TIA) and the Nanotechnology Platform Project. On January 20, 2012, a new organization was decided on by the Japanese Government where several IAI from different science and technology areas will be merged to realize more effective R&D as well as administrative cost reductions. NIMS is also supposed to be merged with 4 other R&D IAI under MEXT by the end of 2013.

• Advances in nano research
• /
• 제4권2호
• /
• pp.129-143
• /
• 2016

The present work reports a facile, rapid and an eco-friendly method for the synthesis of silver nanoparticles using Luffa acutangula (L. acutangula) leaves extract and their antibacterial and cytotoxic effects. The synthesized silver nanoparticles (AgNPs) were characterized by UV-Visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction analysis (XRD). Additionally the topography, morphology and the elemental composition of the particles were determined by Scanning Electron Microscopy (SEM) and Energy dispersive spectrophotometric (EDS) technique and the measured particle sizes from SEM micrographs are in the range of 12.5 to 24.5nm. The in-vitro antimicrobial activity of the synthesized nanoparticles was high against gram positive Staphylococcus aureus and moderate against gram negative Escherichia coli and Pseudomonas aeruginosa strains. Further, the cytotoxic effects of synthesized AgNPs were evaluated against Human Breast Cancer (MCF 7) cell line.

• Advances in nano research
• /
• 제5권4호
• /
• pp.373-392
• /
• 2017

Silver nanoparticles (AgNPs) were successfully synthesized through a simple green route using the Nelumbo nucifera leaf, stem and flower extracts. These nanoparticles showed characteristic UV-Vis absorption peaks between 410-450 nm which arises due to the plasmon resonance of silver nanoparticles. The Fourier transform infrared spectroscopy (FT-IR) confirmed the presence of amides and which acted as the stabilizing agent. X-ray diffraction spectrum of the nanoparticles confirmed the Face centered cubic (FCC) structure of the formed AgNPs. Dynamic light scattering technique was used to measure hydrodynamic diameter (68.6 nm to 88.1 nm) and zeta potential (-55.4 mV, -57.9 mV and 98.9 mV) of prepared AgNPs. The scanning electron micrographs of dislodged nanoparticles in aqueous solution showed the production of reasonably monodispersed silver nanoparticles (1-100 nm). The antimicrobial activity of prepared AgNPs was evaluated against fungi, Gram-positive and Gram-negative bacteria using disc diffusion method. Anti-corrosion studies were carried out using coupon method (mild steel and iron) and dye degradation studies were carried out by assessing photo-catalytic activity of Nelumbo nucifera extracts mediated AgNPs.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1364-1371
• /
• 2018

An extensive investigation of photon interaction properties has been made for $Zn_xTe_{100-x}$ alloys (where x = 5, 20, 30, 40, 50) to explore its possible use in sensing and shielding gamma radiations. The results show better and stable response of ZnTe alloys for various photon interaction properties over the wide energy range, with an additional benefit of ease in fabrication due to lower melting points of Zn and Te. Mass attenuation coefficient values show strong dependence on photon energy as well as composition. Effective atomic number has maximum value for $Zn_5Te_{95}$ and lowest for $Zn_{50}Te_{50}$ in the entire energy region. The alloy sample with maximum $Z_{eff}$ shows minimal value of $N_e$ and vice versa. Mean free path follows inverse trend as observed for mass attenuation coefficient. The exposure and energy absorption buildup factors depend upon photon energy, penetration thickness and composition (effective atomic number) of $Zn_xTe_{100-x}$ alloys. It finds its application for sensing and shielding from highly energetic and highly penetrating photons at sites where radioactive materials were used and visibility of material is not a big constraint. Further, energy down conversion property of ZnTe alloys with subsequent emission in green band suggests its potential use in sensing gamma photons.

• Advances in nano research
• /
• 제12권1호
• /
• pp.49-63
• /
• 2022

Nanocatalysts are usually used in the synthesis of petrochemical products, fine chemicals, biofuel production, and automotive exhaust catalysis. Due to high activity and stability, recyclability, and cost-effectiveness, nanocatalysts are a key area in green chemistry. On the other hand, water as a common by-product or undesired element in a range of nanocatalyzed processes may be promoting the deactivation of catalytic systems. The advancement in the field of hydrophobicity in nanocatalysis could relatively solves these problems and improves the efficiency and recyclability of nanocatalysts. Some recent developments in the synthesis of novel nanocatalysts with tunable hydrophilic-hydrophobic character have been reviewed in this article and followed by highlighting their use in catalyzing several processes such as glycerolysis, Fenton, oxidation, reduction, ketalization, and hydrodesulfurization. Zeolites, carbon materials, modified silicas, surfactant-ligands, and polymers are the basic components in the controlling hydrophobicity of new nanocatalysts. Various characterization methods such as N2 adsorption-desorption, scanning and transmission electron microscopy, and contact angle measurement are critical in the understanding of hydrophobicity of materials. Also, in this review, it has been shown that how the hydrophobicity of nanocatalyst is affected by its structure, textural properties, and surface acidity, and discuss the important factors in designing catalysts with high efficiency and recyclability. It is useful for chemists and chemical engineers who are concerned with designing novel types of nanocatalysts with high activity and recyclability for environmentally friendly applications.

• Nuclear Engineering and Technology
• /
• 제44권4호
• /
• pp.429-436
• /
• 2012

Critical heat flux (CHF) is the thermal limit of a phenomenon in which a phase change occurs during heating (such as bubbles forming on a metal surface used to heat water), which suddenly decreases the heat transfer efficiency, thus causing localized overheating of the heating surface. The enhancement of CHF can increase the safety margins and allow operation at higher heat fluxes; thus, it can increase the economy. A very interesting characteristic of nanofluids is their ability to significantly enhance the CHF. Nanofluids are nanotechnology-based colloidal dispersions engineered through the stable suspension of nanoparticles. All experiments were performed in round tubes with an inner diameter of 0.01041 m and a length of 0.5 m under low pressure and low flow (LPLF) conditions at a fixed inlet temperature using water, 0.01 vol.% $Al_2O_3$/water nanofluid, and SiC/water nanofluid. It was found that the CHF of the nanofluids was enhanced and the CHF of the SiC/water nanofluid was more enhanced than that of the $Al_2O_3$/water nanofluid.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.7-7
• /
• 2011

Quantum beam technology has been expected to develop breakthroughs for nanotechnology during the third basic plan of science and technology (2006~2010). Recently, Green- or Life Innovations has taken over the national interests in the fourth basic science and technology plan (2011~2015). The NIMS (National Institute for Materials Science) has been conducting the corresponding mid-term research plans, as well as other national projects, such as nano-Green project (Global Research for Environment and Energy based on Nanomaterials science). In this lecture, the research trends in Japan and NIMS are firstly reviewed, and the typical achievements are highlighted over key nanotechnology fields. As one of the key nanotechnologies, the quantum beam research in NIMS focused on synchrotron radiation, neutron beams and ion/atom beams, having complementary attributes. The facilities used are SPring-8, nuclear reactor JRR-3, pulsed neutron source J-PARC and ion-laser-combined beams as well as excited atomic beams. Materials studied are typically fuel cell materials, superconducting/magnetic/multi-ferroic materials, quasicrystals, thermoelectric materials, precipitation-hardened steels, nanoparticle-dispersed materials. Here, we introduce a few topics of neutron scattering and ion beam nanofabrication. For neutron powder diffraction, the NIMS has developed multi-purpose pattern fitting software, post RIETAN2000. An ionic conductor, doped Pr2NiO4, which is a candidate for fuel-cell material, was analyzed by neutron powder diffraction with the software developed. The nuclear-density distribution derived revealed the two-dimensional network of the diffusion paths of oxygen ions at high temperatures. Using the high sensitivity of neutron beams for light elements, hydrogen states in a precipitation-strengthened steel were successfully evaluated. The small-angle neutron scattering (SANS) demonstrated the sensitive detection of hydrogen atoms trapped at the interfaces of nano-sized NbC. This result provides evidence for hydrogen embrittlement due to trapped hydrogen at precipitates. The ion beam technology can give novel functionality on a nano-scale and is targeting applications in plasmonics, ultra-fast optical communications, high-density recording and bio-patterning. The technologies developed are an ion-and-laser combined irradiation method for spatial control of nanoparticles, and a nano-masked ion irradiation method for patterning. Furthermore, we succeeded in implanting a wide-area nanopattern using nano-masks of anodic porous alumina. The patterning of ion implantation will be further applied for controlling protein adhesivity of biopolymers. It has thus been demonstrated that the quantum beam-based nanotechnology will lead the innovations both for nano-characterization and nano-fabrication.

• KSBB Journal
• /
• 제23권1호
• /
• pp.37-43
• /
• 2008

(주)녹십자는 1986년 "훽나인"을 B형 혈우병 치료제로 제조품목허가를 받아 B형 혈우병치료제 공급을 시작하였다. 또한 1991년 New York Blood Center에서 selvent/detergent 바이러스 불활화 방법을 도입하여 제조공정에 추가한 후 혈액유래 바이러스로부터 안전한 제품을 생산하여 왔다. 하지만 이 제품은 혈액응고 제2인자, 제7인자, 제10인자가 함유된 제9인자 복합체로, 정맥 혈전증과 파종성 혈관내응고병증 같은 혈전형성 부작용이 일어날 가능성이 있어, 훽나인보다 순도, 유효성, 바이러스 안전성이 우수한 제품의 개발이 필요하였다. 이를 위해 고순도 제9인자 제제인 "GreenNine VF" 제조공정을 개발하였다. GreenNine VF 제조공정은 기존의 훽나인 생산 공정에 heparin 친화성 크로마토그래피와 양이온 크로마토그래피가 추가된 공정으로, 바이러스 안전성을 증진시키기 위한 바이러스 필터 공정도 포함하고 있다. 이러한 공정에 의해서 산업적 규모로 생산된 GreenNine VF는 훽나인에 비해 순도와 바이러스 안전성이 월등히 높은 것으로 확인되었다. 또한 고순도 혈액응고 제9인자 제제인 Mononine, Octanyne, Berinin HS, Immunine STIM plus 600보다 순도가 더 높았다. Cryo-poor plasma 1,600 L를 원료로 사용했을 때 1 batch 당 250IU 분병제품 2,400병 이상, 500 IU 분병제품 1,200병 이상을 생산할 수 있었다.