• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.11
• /
• pp.1020-1024
• /
• 2006

Europium$(Eu^{2+}\;or\;Eu^{3+})$-activated calcium aluminium silicate phosphors were synthesized for the first time and the structures and luminescence characteristics of these phosphors were investigated. The phosphors in this study emitted blue, green, and even red light depending on the starting milterials and annealing conditions for synthesis. In addition, the structure was also changed when the different starting materials were used. When $CaCO_3$ was used as a starting material, tetragonal $Ca_2Al_2SiO_7$ was formed. However, pure green light was emitted when the annealing was conducted in reduced atmosphere and red one was emitted by annealing in air. In the case of $CaSiO_3$ as a starting material, triclinic $CaAl_2Si_2O_8$ was formed and only pure blue emission was observed. Moreover, this blue phosphor exhibited higher intensity than that of commercial YAG:Ce phosphor, which showed the possibility of application on the phosphor for new light source such as a UV-LED.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.56-62
• /
• 2005

The fatigue analysis and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. Fatigue lifetime prediction methodology of the rubber component was proposed by incorporating the finite element analysis and fatigue damage parameter from fatigue test. Finite element analysis of 3D dumbbell specimen and rubber component were performed based on a hyper-elastic material model determined from material test. The Green-Lagrange strain at the critical location determined from the FEM was used for evaluating the fatigue damaged parameter of the natural rubber. Fatigue life of the rubber component are predicted by using the fatigue damage parameter at the critical location. Predicted fatigue lifes of the rubber component agreed fairly well the experimental fatigue lives.

• Current Photovoltaic Research
• /
• v.12 no.1
• /
• pp.6-16
• /
• 2024

The efficiency of silicon solar cells is approaching a theoretical limit referred to as 'the state of the art'. Consequently, maintaining efficiency is more productive than pursuing improvements the last room for limiting efficiency. One of the primary considerations in silicon module conservation is the occurrence of failures and degradation. Degradation can be mitigated during the cell manufacturing stage, unlike physical and spontaneous failure. It is mostly because the chemical reaction is triggered by the carrier generation of thermal and light injection, an inherent aspect of the solar cell environment. Therefore, numerous researchers and cell manufacturers are engaged in implementing mitigation strategies based on the physical degradation mechanism.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.142-147
• /
• 2015

The artificial light sources for growth of plant are usually high-pressure sodium lamp, metal haloids lamp, and fluorescent light; however, these light sources have relatively weaker Red and Blue lights that are necessary for growth of plants. Especially the effect of Photosynthetic Photon Flux Density (PPFD) is pointed out as the weakness. Meanwhile, LED light source can be selected by specific wavelength to greatly improve the effect of PPFD. In this regard, this paper aims to investigate the promotion of plant growth by measuring photosynthetic photon flux density (hereafter referred to as PPFD) according to changes in light quality of the LED light sources. Towards this end, LED light sources for plant growth were produced with 4 kinds of mono-chromatic lights and 6 kinds of combined lights by mixing red, blue, green and white lights. A comparative analysis was conducted to investigate the effects of optical properties and PPFD on plants (green leaf lettuce) using the produced light sources. The results monochromatic light has fastest growth rate, but plant growth conditions have poor. This being so, mixed light is suitable for the green leaf lettuce.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.786-790
• /
• 2016

Hole explosion behaviors were observed during drilling fine holes with laser beam on the LTCC green bar of $320{\mu}m$ thick after lamination of green sheets prepared by tape casting of thick film process. The incidence of these hole explosions was inversely proportional to hole sizes. The incidence of hole explosion was 20 % number of hole with the size of $60{\mu}m$ exploded for the UV radiation, while the explosion did not appear for hole sizes over $100{\mu}m$. To prevent hole explosion behavior during laser-drilling of fine holes, carbon black powder was added as an additive in the LTCC composition, which has superior thermal durability. As a consequence, hole explosion rate was suppressed to 0.8 % for the hole size of $50{\mu}m$ green sheet with the carbon black amount of 10 weight % and the laser power of 3 watt. Added carbon is thought to reduce the heat-affected region during laser drilling.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.5
• /
• pp.305-314
• /
• 2017

Background: Hericium erinaceus is considered a functional food and potential medicinal source. The present study was conducted to examine the potential antioxidant and anti-inflammatory activities of carried out with water and ethanol extracts of Hericium erinaceus grown on germinated green rice (HEGR-W and HEGR-E, respectively) and the water and ethanol extracts of germinated green rice (GR-W and GR-E, respectively) as potential medicinal resources or antioxidant and anti-inflammatory agents. Methods and Results: The total phenolic and flavonoid contents, DPPH, and ABTS activity, reducing power, DNA protective activity, cell viability, and NO production were investigated. The total phenolic and flavonoid contents were highest in HEGR-E ($66.53{\pm}2.40 mg{\cdot}GAE/100g$ and $82.12{\pm}7.10mg{\cdot}CE/100g$ respectively). HEGR-E exhibited high DPPH ($44.70{\pm}1.28%$) and, ABTS ($44.70{\pm}1.28%$) activity and reducing power (0.219). HEGR and GR extracts showed protective activity against DNA damage. The cytotoxicity of HEGR and GR in RAW264.7 cells and LPS-induced RAW264.7 cells was low. HEGR-E and GR-W exhibited anti-inflammatory effects through a 28% inhibition of NO production in LPS-induced RAW264.7 cells. Conclusions: These results suggested that the extracts of Hericium erinaceus grown on germinated green rice could be a potential medicinal material with natural antioxidant and NO inhibitory properties.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.349-356
• /
• 1986

For the extension of application in flash method measuring the thermophysical properties of materials, the heat diffusion equation with the heat transfer loss from front, rear, and circumferential surfaces of two layer cylinderical sample is mathematically analyzed by means of Green's function for axially symmetric pulse heating on the front of samples. The solutions are applied to determine the unknown thermal diffusivity of the two materials and analyzed the measurement error due to heat loss and finite pulse time effects.

• Transactions of Materials Processing
• /
• v.19 no.3
• /
• pp.191-196
• /
• 2010

Tungsten-carbide as typical difficult-to-cut material has excellent mechanical properties such as high thermal resistivity, mechanical strength and chemical durability. However, it is next to impossible for tungsten-carbide to be fabricated the needed parts by cutting process. In this study, for establishing the micro fabrication method of tungsten-carbide for micro injection or compression molding core, the investigation on micro cutting characteristics of tungsten-carbide green part which is made by powder injection molding process and easy to cut relatively was performed. For this, micro endmilling experiments of tungsten-carbide green part were performed according to various cutting conditions. Finally, the wear trend of micro endmill and the appearance of micro rib according to feed-rate and cutting depth per step were analyzed through SEM images of micro cutting feature and microscope images of micro tools.

• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.7-13
• /
• 2008

In order to introduce new functions onto textile fabrics, nylon and cotton were treated with green tea extracts. And then the anti-oxidant activity of fabrics treated with the extracts was evaluated by Blois method using DPPH ($\alpha$, $\alpha$-diphenyl- $\beta$-picrylhydrazyl). The anti-oxidant activity was exhibited on the textile fabrics treated as well as by the extracts itself. The cotton fabric treated with 10% o.w.f. of extract appeared to have almost 90% of anti-oxidant activity and 95% was obtained for nylon.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.239-248
• /
• 2017

Green synthesis of gold nanoparticles(GNPs) considered more ecofriendly and cost effective than other chemical methods use of dangerous reagents and solvents, improved material and energy efficiency and enhanced design of non-toxic products. In this study, we developed a green synthesis method for using Caulis in Taeniam (BCT). BCT were characterized by UV-vis, Zetasizer, TEM, XRD, and FTIR. The antioxidant activity of BCT was determined by DPPH and ABTS radical-scavenging assays, and heme oxygenase-1 induction in RAW 264.7 macrophages. The resulting BCT appeared spherical with an average diameter of 67.171.39 nm The aAntioxidant activity was increased in a dependent manner. To conclude, the green synthesis of BCT-GNPs was successful, and it appers to be useful in the for future applications.