• 조명전기설비학회논문지
• /
• 제20권5호
• /
• pp.64-71
• /
• 2006

전력설비의 비정상적인 온도변화를 감시할 목적으로 10개의 광섬유격자를 이용하여 $1[^{\circ}C]$ 이내의 온도분해능을 가지는 준분배형 광섬유 온도센서를 제작하였다. 파장가변 FP 필터를 스캔하여 얻어지는 PD 출력파형의 피크위치를 검색하여 광섬유격자 센서의 출력변화를 읽어내었고, 가우시안 line-fitting 알고리즘으로 광섬유격자의 반사스펙트럼 왜곡에 의한 영향을 보상하고 정밀도를 향상시켰다. 제작한 센서시스템과 기준 온도계로 사용한 thermocouple 간의 측정값 오차는 1[%] 이내이며, 선형화 오차는 약 0.37[%]으로 측정되었다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 추계학술발표대회 논문집
• /
• pp.114-117
• /
• 2006

Diffraction grating is the optical device which has periodic pattern. Decorative logotypes is the one of application of diffraction grating. In this paper diffraction grating for decorative logotype is fabricated by dot pattern in stead of line pattern. A metallic mold for diffraction gratings is fabricated with a mode-locked 12 ps $Nd:YVO_4$ laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate dot patterns. In order to minimize the dot diameter, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application.

• Macromolecular Research
• /
• 제13권6호
• /
• pp.477-482
• /
• 2005

Photopolymers are attractive materials for holographic 3-D data storage because of their high photosensitivity and large refractive index modulation. We synthesized the six-armed dendrimer for fabricating the new photopolymer. It was prepared using the initiating mixture of hexaarylbiimidazole (HABI), mercapto-benzoxazole (MOBZ), and 2,6-bis(4-diethylaminobenzylidene)cyclopentanone (DEAW), which is sensitive to 514 nm wavelength. The holographic gratings were fabricated successfully in these photopolymer samples by conventional optical interference method. We investigated the effect of dendrimer, either as a binder or as a plasticizer in the cellulose acetate butyrate (CAB), on the diffraction behavior. The addition of only 1 wt$\%$ of dendrimer-I into the CAB significantly increased the diffraction efficiency. The sample doped with dendrimer showed around 80-83$\%$ of the diffraction efficiency.

• 한국광학회지
• /
• 제17권6호
• /
• pp.489-492
• /
• 2006

평판도파로 상에 FP-LD와 샘플격자를 하이브리드 집적하여 듀얼 모드로 발진하는 외부 공진기 레이저를 구현하였다. 샘플격자에 인가되는 전류를 50mA에서 55mA로 변화시킴으로써 듀얼 모드간의 beat 주파수를 132GHz에서 406GHz로 스위칭할 수 있었다.

• 대한전자공학회논문지SD
• /
• 제37권8호
• /
• pp.57-66
• /
• 2000

비대칭 광섬유 커플러 ADF(add/drop filter)의 필터링 특성을 새로운 연산자 분리 시영역 모델을 이용해서 해석하였다. 연산자 분리 시영역 모델은 방향성 결합기와 브래그 격자를 포함하는 구조의 소자를 전산모사 할 때 미우 유용하다. 먼저 이 모델을 이용하여 대칭구조의 고아섬유 커플러 ADF의 특성을 해석하여 연산자 분리 알고리듬의 정확도를 확인 한 후에, 비대칭 구조 ADF의 특성을 해석하여 필터링 성능의 최적화에 필요한 파라미터 값들을 도출하였다.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.140-148
• /
• 1998

We prepared $C_3N_4$ films by rf plasma enhanced chemical vapor deposition(PCVD) and alternating $C_3N_4$/TiN composite films by dc magnetron sputtering. X-ray diffraction (XRD) and transmission electron diffraction (TED) revealed that the structure of the films is amorphous or polycrystalline, depending on deposition conditions and heat treatment. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy confirmed the presence of $sp_3\; and sp _2$ hybridized C atoms bonded with N atoms in the tetrahedral and hexagonal configurations, respectively. Graphite-free $C_3N_4$ films were obtained by PCVD under optimal conditions. To prepare well crystallized $C_3N_4$ films by magnetron sputtering, we introduced negatively biased gratings in the sputtering system. CN films deposited at grating voltages (Vg) lower than 400V are amorphous. Crystallites of cubic and $\beta$-$C_3N_4$ were formed at increased voltages.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.90-99
• /
• 2007

We demonstrate an 80km-reach 64-channel DWDM-PON based on wavelength-locked F-P LDs by changing the position of the C-band BLS for upstream channels from the CO to the RN. It mitigates the necessity of the high power C-band BLS and its handling problems. It also reduces back scattering induced penalty. We obtained less than $10^{-6}$ PLRs in all 128channels through 80km SMF. We also demonstrate a 240km-reach DWDM-PON based on wavelength-locked F-P LDs by adding a bidirectional erbium-doped fiber amplifier(EDFA). We show packet-loss-free transmission in all 128channels at 125 Mb/s per channel over 240km SMF We report the detuning effect of arrayed waveguide gratings(AWGs) and crosstalk effect in the implemented system. We Propose an architecture of a next generation defense wire communication system with the demonstrated long-reach DWDM-PON.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1840-1842
• /
• 2003

This paper describes an experiment of detecting a temperature and components of arc plasma of electrical circuit breaker with a spectroscopic system. The system includes an optical fiber, a monochromator which has three gratings from low to high resolution and ICCD of which time resolution is 50 ns. This system enables measuring a temperature and components of arc plasma of a circuit breaker which is generated and extinguished in a few ms. We use a Planck's law and Boltzmann Plot method for calculating a temperature of arc plasma. A Xenon lamp is used for calibrating the system and this is very important for calculating a temperature of arc plasma. In this study, Arc plasma of Ag and Cu contact was investigated and these represent the contact of low voltage and extra-ultra high voltage circuit breaker, respectively. 8 $kA_{rms}$ test current was applied with a capacitor bank.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.1-6
• /
• 2013

In this study, we propose a fiber-optic hydrogen sensor using a polarization-diversity loop configuration composed of a polarization beam splitter, two quarter-wave plates, and a polarization-maintaining fiber coated with palladium whose thickness is ~400nm. One transmission dip of the output interference spectrum of the proposed sensor, chosen as a sensor indicator, was observed to spectrally shift with the increase of the hydrogen concentration, and the sensing indicator showed a wavelength shift of ~2.48nm at a hydrogen concentration of 4%. Except for a hydrogen concentration of 4%, the response time of the proposed sensor was measured as less than 12.5s and did not show significant dependence on the hydrogen concentration. In particular, the proposed fiber hydrogen sensor is more durable and highly resistant to external stress applied on a transverse axis of an optical fiber, compared with other hydrogen sensors based on side-polished fibers or fiber gratings.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.46-47
• /
• 2002

최근 액정을 주입한 속이 빈 광섬유(Hollow fiber)와 주기적인 전극을 이용하여 전기적으로 제어 가능한 장주기 격자에 대해서 보고된 바 있다. 액정의 중요한 특성 중의 하나는 그 광축이 외부의 전기장에 의해 동적으로 재배열된다는 점이다. 또한 액정은 광축에 따라 굴절률이 다른 비등방성 물질이기 때문에 광축의 배열에 따라, 그리고 입사하는 빛의 편광에 따라 그 빛이 느끼는 굴절률이 달라지게 된다. 본 논문에서는 입사하는 빛의 편광에 따른 액정 장주기 광섬유 격자의 특성에 대해 연구하였다. 주기적인 전극의 길이는 3 cm이고 주기는 500 ${\mu}m$ 이다. 액정을 주입한 속이 빈 광섬유의 길이는 15 mm 이다. 입사하는 빛이 이상(extraordinary) 편광 상태일 때 약 6 dB 의 투과 손실을 나타냈으며 그 대역폭은 약 15 nm 이었다. 이 때 외부에서 인가한 전압은 150 V 였다. 입사하는 빛이 정상(ordinary) 편광 상태일 때에는 액정의 유효 굴절률이 외부 전기장에 대해 변하지 않기 때문에 장주기 투과 특성을 얻을 수 없었다.