• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.134.1-134.1
• /
• 2008

• Geomechanics and Engineering
• /
• 제7권1호
• /
• pp.1-36
• /
• 2014

The effect of various parameters on the propagation of surface waves in electro-magneto thermoelastic orthotropic granular non-homogeneous medium subjected to gravity and initial compression has been studied. All material coefficients are obeyed the same exponent-law dependence on the depth of the granular elastic half space. Some special cases investigated by earlier researchers have also been deduced. Dispersion curves are computed numerically and presented graphically.

• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.1-10
• /
• 2020

An understanding of particle-particle interactions in filtration requires studying the detachment as well as the attachment of nanoparticles. Nanoparticles captured in a granular media filter can be released by changing the physicochemical factors. In this study, the detachment of captured silver nanoparticles (AgNPs) in granular media filtration was examined under different ionic strengths, ion type, and the presence or absence of natural organic matter (NOM). Filtration velocity and ionic strength were chosen as the physical and chemical factors to cause the detachment. Increasing filtration velocity caused a negligible amount of AgNP detachment. On the other hand, lowering ionic strength showed different release amounts depending on the background ions, implying a population of loosely captured particles inside the filter bed. Overall detachment was affected by ionic strength and ion type, and to a lesser degree by NOM coating which resulted in slightly more detachment (in otherwise identical conditions) than in the absence of that coating, possibly by steric effects. The secondary energy minimum with Na ions was deeper and wider than with Ca ions, probably due to the lack of complexation with citrate and charge neutralization that would be caused by Ca ions. This result implies that the change in chemical force by reducing ionic strength of Na ions could significantly enhance the detachment compared to that caused by a change in physical force, due to a weak electrostatic deposition between nanoparticles and filter media. A modification of the 1-D filtration model to incorporate a detachment term showed good agreement with experimental data; estimating the detachment coefficients for that model suggested that the detachment rate could be similar regardless of the amount of previously captured AgNPs.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.666-672
• /
• 2004

Granular media filtration is used almost universally as the last particle removal process in conventional water treatment plants. Therefore, superb particle removal efficiency is needed during this process to ensure a high quality of drinking water. However, every particle can not be removed during granular media filtration. Besides the pattern of particle attachment is different depending on physicochemical aspects of particles and suspension. Filtration experiments were performed in a laboratory-scale filter using spherical glass beads with a diameter of 0.55 mm as collectors. A single type of particle suspension (Min-U-Sil 5) and pH control was used to destabilize particles. The operating conditions were similar to those of standard media filtration practice: a filtration velocity of 5 m/h. More favorable particles, i.e., particles with smaller surface charge, were well attached to the collectors especially during the early stage of filtration. This selective attachment of the lower charged particles caused the zeta potential distribution (ZPD) of the effluent to move to a more negative range. On the other hand, the ZPD of the effluent did not keep moving from less negative to more negative during the later stages of filtration, and this result was thought to be caused by two reasons: ripening effects and the detachment of flocs.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.519-526
• /
• 2006

In this study, the major operating factors in SND(simultaneous nitrification and denitrification) using bioreactor packed with submerged cilia media and granular sulfur such as variation of nitrification rate, organic matter removal efficiency and denitrification efficiency in different DO concentration were mainly evaluated. Synthetic wastewater and actual sewage were used as influent wastewater. Experiment with synthetic wastewater as influent wastewater was divided into three phases with the adjustment of DO concentration. As the results, nitrification efficiency and T-N removal efficiency in the Phase 3(DO 1.0~2.0 mg/L) were 99% and 52.3%, which is significantly greater than those in other two phases. Also, loading rate and denitrification efficiency of SCPGS(Submerged Cilia media Packed with Granular Sulfur) were calculated as $0.44kg\;NO_3^--N/m^3-day$ and 50%, respectively. On the other hand, nitrification rate was decreased from 99% to 64% according to the DO concentration with the variation from 3.0~3.5 mg/L(phase1) to 0.4~0.6mg/L(phase2). Although the nitrification rate was decreased in 64% according to the variation of the DO concentration, T-N removal rate was rapidly increased to 49% by increasing of the denitrification efficiency. Experiment with actual sewage as influent wastewater was carried out to evaluate efficiency of SCPGS in real operation condition of full-scale sewage water treatment plant. At the time, T-N removal rate in this experiment and full-scale wastewater treatment plants were given by 43% and 20%, respectively. The above results indicate that SCPGS can be used as an advanced treatment process for economical efficiency considered.

• 생물환경조절학회지
• /
• 제2권1호
• /
• pp.37-45
• /
• 1993

국내 원예시설이 고정화되면서 각종 연작 장해가 나타남에 따라 객토와 토양소독의 필요성이 커지고 있으나 객토와 토양소독에 소요되는 비용 증가가 큰 문제로 대두되고 있다. 이에 따른 간이한 양액재배 시스템으로서 농가에서도 투자비용과 운용비용이 저렴하면서 환경오염의 염려가 없거나 적은 각종 인공배지를 활용한 토마토 자루재배(bag culture) 실험결과는 다음과 같다. 1. 단용배지를 이용한 토마토 자루배재에서 질석, 훈탄, 모래, 페놀수지 (PRE), 입상면, perlite 등에서 생육, 수량 및 품질면에서 이용가능성이 높고 이들 배지의 단점을 보완한다면 암면 대체도 가능할 것으로 보인다. 2. 혼합배지를 이용한 토마토 자루재배에서 perlite와 입상면 혼합처리에서는 perlite 20-40％수준과 입상면 80-60％수준에서, peatmoss와 질석 혼합처리에서는 peatmoss 40-60％와, 질석 60-40％ 혼합비율에서, peatmoss+질석 +입 상면 혼합처리에서는 peatmoss를 50-60％로 하고 질석과 입상면을 각각 25-20％로 혼합한 경우에서 각각 높은 수량과 품질을 보여주었다.

• 환경생물
• /
• 제21권4호
• /
• pp.405-409
• /
• 2003

To study the tolerant capacity of anaerobic granular sludge (AGS) to oxygen using semi -dynamic batch experiment, the aerating time, pH of the basal media, reductive inorganic materials, microorganism, and microorganism metabolite were investigated. When the aerating time was higher or lower than 0.5 h, the producing gas activity of sludge was lower than that of the control. The oxygen tolerance of the experimental sludge was the highest at the initial pH 7.2. The producing gas activity of sludge I was higher than that of sludge II. And storage at $4^{\circ}C$ can low the lose of the oxygen tolerance capacity of granular sludge. The producing gas activity of sludge was the highest when KI was added. The growth of aerobic microorganisms and some metabolite could increase the producing gas activity of granular sludge.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.813-822
• /
• 2006

Soluble manganese removal was analyzed as a function of filter media, filter depth, presence or absence of chlorination, and surface manganese oxide concentration in water treatment processes. Sand, manganese oxide coated sand (MOCS), sand+MOCS, and granular activated carbon(GAC) were used as filter media. Manganese removal, surface manganese oxide concentration, turbidity removal, and regeneration of MOCS in various filter media were investigated. Results indicated that soluble manganese removal in MOCS was rapid and efficient, and most of the removal happened at the top of the filter. When filter influent (residual chlorine 1.0mg/L) with an average manganese concentration of 0.204mg/L was fed through a filter column, the sand+MOCS and MOCS columns can remove 98.9% and 99.2% of manganese respectively on an annual basis. On the other hand, manganese removal in sand and the GAC column was minimal during the initial stage of filtration, but after 8 months of filter run they removed 99% and 35% of manganese, respectively. Sand turned into MOCS after a certain period of filtration, while GAC did not. In MOCS, the manganese adsorption rate on the filter media was inversely proportional to the filter depth, while the density of media was proportional to the filter depth.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.231-235
• /
• 2020

Industrialization and modern developments have led to an influx of toxic heavy metals into the aquatic environment, and the accumulation of heavy metals has serious adverse effects on humans. Among the various heavy metal treatment methods, adsorption is very useful and frequently used. Plastic materials, such as polypropylene and polyethylene, have been widely used as filter media due to their mechanical and chemical stability. However, the surface of plastic material is inert and therefore the adsorption capability of heavy metals is very limited. In this study, granular media and fiber media composed of polypropylene and polyethylene are used, and the surface modification was conducted in order to increase adsorption capability toward heavy metals. Oxygen plasma generated hydroxyl groups on the surface of the media to activate the surface, and then acrylic acid was synthesized on the surface. The grafted carboxyl group was confirmed by FT-IR and SEM. Heavy metal adsorption capability of pristine and surface modified adsorbents was also evaluated. Overall, heavy metal adsorption capability was increased by surface modification due to electrostatic interaction between the carboxyl groups and heavy metal ions. Fibrous PP/PE showed lower improvement compared to granular PP media because pore blockage occurred by the surface modification step, thereby inhibiting mass transfer.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.625-630
• /
• 2004

입상여과는 표준식 정수처리 공정에서 입자물질 제거의 최종공정으로 대부분 사용되고 있다. 따라서 양질의 수돗물을 만들기 위해서는 입상여과에서 높은 수준의 입자물질 제거가 요구되고 있다. 그러나 여과공정에서 모든 입자물질을 제거할 수 없으며, 또한 입자물질의 부착특성은 입자와 용액의 물리화학적 특성에 따라 달라진다. 실험실규모의 여과칼럼과 입경 0.55mm의 유리구슬을 여재로 한 여과실험이 수행되었다. Min-U-Sil 5가 입자물질로 사용되었으며 입자물질을 불안정화하기 위하여 액반을 사용하였다. 운전조건은 표준입상여과와 동일하였으며 여과속도는 5m/h 였다. 입자와 여재가 모두 음의 표면전하를 갖을 경우 작은 표면 전하를 갖는 입자가 여과초기에 여재에 잘 부착되었다. 작은 표면전하를 갖는 입자의 선택적 부착은 유출수의 제타 전위분포를 더 음인 방향으로 이동시켰다. 한편 입자의 표면전하가 양의 값을 갖을 경우는 여과수 입자의 표면전하가 양의 큰 값에서 작은 값으로 변하였는데 이는 입자와 여재사이의 이온전이에 기인하는 것으로 생각된다.