• Applied Microscopy
• /
• v.29 no.1
• /
• pp.57-66
• /
• 1999

The nervous tissue in the cerebral ganglion of Korean planaria was observed using electron microscope. The obtained results are as follows: A cerebral ganglion is composed of the nerve cells, neurosecretory cells, neuroglial cells and neuropils. The nerve cells are round or ovoidal-shaped cells (diameter, $5{\mu}m$), which has a large ellipsoidal nucleus containing the evenly developed heterochromatin. Their cytoplasms were found to be relatively simple, because of their undeveloped cell organelles. The neurosecretory cells are long and ellipsoid or spindle-shaped cells, where there were found a large ellipsoidal nucleus and cytoplasm filled with secretory granules (diameter, 60 nm). The neuroglial cells were seldom observed. They are spindle-shaped cells (size, $6\times0.8{\mu}m$), which were observed mainly among the nerve fibers. The neuropils are formed by the nerve fibers and nerve endings which are filled with mitochondria, neurotubules and secretory granules of four kinds (high electron dense granules of sizes 75 nm, 50 nm and 37 nm, and electron lucent granule of size 30 nm etc.). These granular vesicles are divided into single vesicle type and compound vesicle type in the nerve terminals, and neuronal synapses were observed to be the axo-dendritic and dendro-dendritic synapse type.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1037-1044
• /
• 2000

The objective of this study is the preparation of activated carbon for BAC(biological activated carbon). Prepared activated carbon was measured iodine adsorption(mg/g). methylene blue adsorption(mg/g), B.E.T($m^2/g$), PSD(Pore Size Distribution) and 'Picabiol' which in commercial activated carbon for BAC. Activation method for this study was a chemical activation used the phosphoric acid. In the method, two important factors affected activation characterized in preparation were temperature and impregnated phosphoric acid concentration. Activation temperature and impregnated phosphoric acid concentration were changed the $600{\sim}800^{\circ}C$ and 35~50wt% respectively. Activation time was fixed for 3 hour. Optimal activation temperature was $800^{\circ}C$ and impregnated phosphoric acid concentrations was about 50wt%. By the above condition specific surface area, iodine adsorption number and methylene blue adsorption number resulted $1643.3m^2/g$, 1093 mg/g, 445.6 mg/g, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.936-941
• /
• 2010

This study was conducted to investigate formaldehyde removals by silver nano-particles attached on the surface of granular activated carbon (Ag-AC) and to compare the results to those obtained with ordinary activated carbon (AC). The BET analysis showed that the overall surface area and the fraction of micropores (less than $20{\AA}$ diameter) of the Ag-AC were significantly decreased because the silver particles blocked the small pores on the surface of the Ag-AC. The formaldehyde removal capacity of the Ag-AC determined using the Freundlich isotherm was higher than that of AC. Despite the decreased BET surface area and micropore volume, the Ag-AC had the increased removal capacity for formaldehyde, presumably due to catalytic oxidation by silver nano-particles. In contrast, the adsorption intensity of the Ag-AC, estimated by 1/n in the Freundlich isotherm equation, was similar to that of the ordinary AC, indicating that the surface modification using silver nano-particles did not affect the adsorption characteristics of AC. In a column experiment, the Ag-AC also showed a longer breakthrough time than that of the AC. Simulation results using the homogeneous surface diffusion model (HSDM) were well fitted to the breakthrough curve of formaldehyde for the ordinary AC, but the predictions showed substantial deviations from the experimental data for the Ag-AC. The discrepancy was due to the catalytic oxidation of silver nano-particles that was not incorporated in the HSDM. Consequently, a new numerical model that takes the catalytic oxidation into accounts needs to be developed to predict the combined oxidation and adsorption process more accurately.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.191-201
• /
• 2002

The Gubong gold-silver deposits if gold-silver-bearing hydrothermal massive quartz veins which were filled the fractures along fault shear (NE, NW) zones within Precambrian banded or granitic gneiss of Gyeonggi massif. Ore mineralization of this deposits is contained within a single stage of quartz vein which was formed by multiple episodes of fracturing and healing. Ore minerals are comported mainly of arsenopyrite, pyrite, sphalerite, chalcopyrite, galena with minor amounts of pyrrhotite, marcasite and electrum. The frequency and volume percentages of electrum associated with ore minerals from this deposits are recognized as follows; 44.5% and 54.3% with arsenopyrite, 24.3% and 33.8% with quartz, 12.6% and 0.1% with pyrite, 11.0% and 4.8% with galena, 5.0% and 7.0% with sphalerite and 2.5% and 0.02% with chalcopyrite, respectively. They show irregular (41.6%), subround (34.7%), elongate (17.0%) and granular (6.6%) shapes, respectively. Their grain size ranges from 2 to 150 um, but 90.9 percent of the grains are below 30 um. The chemical composition of electrums ranges from 26.39 to 72.51 Au atomic %. These composition (Au atomic %) on the basis of associated minerals are from 44.97 to 71.75 with arsenopyrite, pyrite, sphalerite and quartz, from 44.37 to 72.51 with quartz, from 35.40 to 41.01 with sphalerite and chalcopyrite, from 26.39 to 54.84 with pyrite, chalcopyrite, quartz and galena, from 28.49 to 53.28 with galena, respectively. We suggest that optimum recovery of gold would be obtained with reference to these results.

• The Korean Journal of Pharmacology
• /
• v.31 no.2
• /
• pp.241-250
• /
• 1995

Protein B23 is one of the major nucleolar phosphoproteins associated with pre-ribosomal particles, and is localized in the granular region of the nucleolus. Recent studies suggest that protein B23 shuttles between nucleus and cytoplasm and also interacts with HIV Rev. These findings indicate that protein B23 is important in nucleocytoplasmic relationship and viral replication. However, the exact function of protein B23 is not clear yet. In acute nucleolar hypertrophy of rat liver, treated with thioacetamide, there was observed an increase of not only protein B23 but also B23-like protein p45 when anti-B23 monoclonal antibody (MAb) was used for identification. On the basis of the large B23 specific epitope structure composed of 68 amino acids, a hypothesis was formulated to examine that p45 is the pre-B23 resulting from excessive production of B23. In an attempt to investigate the precursor of B23, we analyzed the subcellular fractions and microsomal subfractions. Subsequently, we analyzed the finger printings of B23-like proteins using the tryptic peptide mapping. The results are summarized: 1) Using B23 MAb, we observed the presence of B23-like proteins in nucleolar fraction, nucleoplasmic fraction and microsomal fraction. 2) In the further microsomal subfractionation, we could partially purify B23-like protein in 2M layer of sucrose gradient. 3) When ion exchange chromatography was employed, there were protein species 80kDa(p80), 65kDa(p65) and 60kDa(p60). 4) Based on the tryptic map analysis of $^{125}I$ labeled proteins, the similarity between B23 and p80 was found only in 9 out of 14(B23) and 21(p80) peptides, and difference was found in the remaining peptides. p80 and p60 had 18 common peptides, and all the peptides of p60 were similar to those of p80. From these results, it is proposed that p45 is an abnormal metabolite resulting from carcinogenesis by thioacetamide, and it is not the precursor of B23. In addition, we suggest that p80 may be a precursor of p45.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.133-139
• /
• 2001

To treat piggery wastewaters containing refractory compounds including nitrogen, biological treatments were investigated. In biological treatment, the removal efficiencies of organics and nitrogen by the activated sludge process and bioreactor using a BACC (Biological Activated Carbon Cartridge) media filled with granular activated carbon were examined. The results were as follows; in the biological process, when the approximate influent BOD concentration of 620 mg/L, through dilution, was treated by the activated sludge process, the process should be operated at a HRT of over 8 days to maintain an effluent BOD concentration of lower than 100 mg/L. In the treatment of piggery wastewater using a BACC bioreactor, when the HRT was 200 hours, the BOD, COD(sub)cr, and TKN removal efficiency of the effluent were 94, 75 and 64.3%, respectively. Comparing the BACC bioreactor with the activated sludge process, when the volumetric loading rate was 0.3 g BOD/L.day, the specific substrate removal rate of BOD was 0.14 g BOD removed/L.day in the activated sludge process which compared with 0.27 g BOD removed/L$.$day in the BACC bioreactor. The BACC bioreactor showed on average a 2-fold higher removal rate and was superior to the activated sludge process in wastewater treatment in terms of variations of loading time and high loading time. Therefore, the BACC process can effectively treat piggery wastewater containing high concentrations of nitrogen and organic compounds.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.165-175
• /
• 2009

With the current move towards adopting mechanistic-empirical concepts in the design of pavement structures, state-of-the-art mechanistic analysis methodologies are needed to determine accurate pavement responses, such as stress, strain, and deformation. Previous laboratory studies of pavement foundation geomaterials, i.e., unbound granular materials used in base/subbase layers and fine-grained soils of a prepared subgrade, have shown that the resilient responses followed by nonlinear, stress-dependent behavior under repeated wheel loading. This nonlinear behavior is commonly characterized by stress-dependent resilient modulus material models that need to be incorporated into finite element (FE) based mechanistic pavement analysis methods to predict more realistically predict pavement responses for a mechanistic pavement analysis. Developed user material subroutine using aforementioned resilient model with nonlinear solution technique and convergence scheme with proven performance were successfully employed in general-purpose FE program, ABAQUS. This numerical analysis was investigated in predicted critical responses and domain selection with specific mesh generation was implemented to evaluate better prediction of pavement responses. Results obtained from both axisymmetric and three-dimensional (3D) nonlinear FE analyses were compared and remarkable findings were described for nonlinear FE analysis. The UMAT subroutine performance was also validated with the instrumented full scale pavement test section study results from the Federal Aviation Administration's National Airport Pavement Test Facility (FAA's NAPTF).

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.2
• /
• pp.79-84
• /
• 1977

In order to confirm the effect of potash top dressing and to observe the effect of N, K compound fertilizers, 17-0-17, 17-0-14, and 15-0-20, specially prepared for top dressing to rice, a field experiment with rice (Oryza Sativa L., Akibare) was conducted in a poorly drained paddy field in comparison with potassium chloride. The results obtained are as follows, 1. The effect of potash top dressing to rice was so remarkable that the yield from the plots of split application of muliate potassium or compound fertilizer was significantly higher than that from the plot received no potash at all. In contrast, the plots received all the amount of potash as one dose at transplanting time showed no significant increase in yield compared with that of potash plot. 2, The effect of N, K compound fertilizer, granulated to about the size of a small bean appeared to be so slow that it gave little increase of yield when it was appiled as a top dressing at the primodial stage, but it gave an increase of yield when it was top dressed at effective tillering stage. 3, Granular N, K compound fertilizer to be top dressed at primodial stage might be prepared in small size so that the fertilizer readily go into solution when it was applied, otherwise the fertilizer should be applied eariler than the primodial stage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.457-457
• /
• 2010

Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.296-300
• /
• 1988

A trial product of monogranular compound fertilizer for sesame under vinyle mulching cultivations was manufactured using the principal sources of urea, diammonium phosphate and muriate of potash in combination with a filler of zeolite and a binder of liquid waste from glutamic acid fermentation. Two field experiments using transparent vinyl mulching for single-crop cultivation and black vinyl mulching for cultivation after wheat and barley cropping were carried out to evalute their effects on sesame and the results obtained were as follows. Plant height and stem diameter of the trial product in sesame plant were higher and better than those of NPK split application and NPK all basic application. As the yield of the trial product was higher and similar to the NPK application plots in transparent and black vinyl mulching treatment respectively, the one time basic application of a developed monogranular compound fertilizer for sesame was possible under vinyl mulching cultivation.