• Journal of the Korean Regional Science Association
• /
• v.33 no.3
• /
• pp.61-78
• /
• 2017

Among several policies for industrial decentralization introduced since the 1960s, business relocation grant policies put a heavy financial burden on central and local governments. This study investigates the change in the likelihood of manufacturing establishments' relocation to the non-SMA associate with the change in business relocation grant policies. Using the mining and manufacturing survey data from 1996 to 2014, manufacturing firms' relocation decision model in nested logit structure was estimated. The data showed that the proportion of movements from the SMA to the non-SMA significantly increased after the introduction of the grant policies. However, estimation results of firms' relocation decision model indicated that the likelihood of firms relocating from the SMA to the non-SMA decreased after the introduction of the grant policies. In particular, firms' likelihood to move into the rural regions is even lower in the period of the grant extension. This suggests that increasing rate of relocations toward the rural regions may have been driven by the growing advantage of rural locations, such as low land rent and improvement in market accessibility, rather than the grants per se. This implies that the alleviation of physical and environmental constraints of the rural regions and the creation of business friendly environment such as easy access to premises at reasonable prices and strengthened linkage with the SMA, rather than simple provision of business relocation grants, needed to attract businesses in the rural regions.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.131-149
• /
• 2000

In connection with international commercial arbitration the need to seek interim relief is generally recognized. Interim reliefs address the requirements of a party for immediate and temporary protection of rights or property pending a decision on the merits by the arbitral tribunal. The most common forms of interim relief are attachments and injunctions. If the arbitral tribunal has not yet been appointed, an application for interim relief must usually be addressed to the local courts at the place of commercial arbitration. If the arbitral tribunal has been appointed, the application for interim relief is first made to the arbitral tribunal. Interim relief by the arbitral tribunal is in the form of a direction to the parties. Since the arbitral tribunal has no enforcement power, it may be necessary to have a arbitral tribunal's direction confirmed by a local court which can enforce its order. The New York Convention does not provide for interim reliefs. The question is whether Article II(3) of the New York Convention that the court "shall, at the request of one of the parties, refer the parties to arbitration" denies jurisdiction to courts to grant interim reliefs in international commercial arbitration. Some cases have indicated that the U. S. court have no power to grant interim relief. Other cases have indicated that the U. S. courts do have the power to grant interim relief. It is unlikely that a U. S. court will order interim relief in relation to an commercial arbitration in a foreign country. Article 26 of the UNCITRAL Arbitration Rules provides with respect to interim measures of protection. Section 1 of Article 26 of UNCITRAL Arbitration Rules provides that the arbitral tribunal may take any interim measures it deems necessary in respect of the subject matter of the dispute, including measures for the conservation of the goods forming the subject matter in dispute. This article gives the arbitral tribunal the broadest authority, not limited to safeguarding property. Article 17 of the UNCITRAL Model Law on International Commercial Arbitration provides that the arbitral tribunal may order any party to take such interim measure of protection as the arbitral tribunal may consider necessary in respect of the subject matter of the dispute. It may be noted that the article does not deal with enforcement of such measures. The International Chamber of Commerce Rules of Conciliation and Arbitration do not expressly empower the arbitral tribunal to grant interim reliefs. However, Article 8.5 of the ICC Rules of Conciliation and Arbitration provides that the parties shall be at liberty to apply to any competent judicial authority for interim measures. In conclusion, the power of the arbitral tribunal to provide interim reliefs is generally recognized in the arbitration rules of arbitral institutions. However, the arbitral tribunal's authority is limited by its lack of enforcement mechanisms. It is generally recognized that the local courts have power to grant interim reliefs in aid of an commercial arbitration. However, local courts are reluctant to grant interim reliefs if that decision requires an adjudication of issues within the special competence of the arbitral tribunal.

• Journal of Veterinary Clinics
• /
• v.10 no.1
• /
• pp.131-135
• /
• 1993

In this case, Grant's Zebra which had been bred and exhibited in Farmland Zoological Garden for 4 years, died after treated dystocia. Result in autopsy, she had large hepatic abscess, and blood chemistry were increased G07, GPT and total billirubin. The microbiological culture with the hepatic abscess idetified the Streptococcus equi. It is diagnosed of hepatic abscess which was caused by Streptococcus equi infection.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.223-230
• /
• 2001

The Monkman-Grant (M-G) and its modified parameters were estimated for modified type 316LN and $9{\sim}12Cr-1Mo$ steels with chemical variations. Several sets of creep data were obtained by constant-load creep tests in $550-650^{\circ}C$ ranges. The relation parameters, m, $m^*$, C and $C^*$ were proposed and discussed for two alloy systems. In creep fracture mode, type 316LN steel showed domination of the intergranular fracture caused by growth and coalescence of cavities. On the other hand, the Cr-Mo steel showed transgranular fracture of the ductile type caused from softening at high temperature. In spite of the basic differences in creep fracture modes as well as creep properties, the M-G and its modified relations demonstrated linearity within the $2{\sigma}$ standard deviation. The value of the m parameter of the M-G relation was 0.90 in the 316LN steel and 0.84 in the Cr-Mo steel. The value of the $m^*$ parameter of the modified relation was 0.94 in the 316LN steel and 0.89 in Cr-Mo steel. The modified relation was superior to the M-G relation because the $m^*$ slopes almost overlapped regardless of creep testing conditions and chemical variations to the two alloy systems.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1420-1427
• /
• 2002

The Monkman-Grant (M-G) and its modified parameters were evaluated for type 316LN and modified 9Cr-Mo stainless steels prepared with minor element variations. Several sets of creep data for the two alloy systems were obtained by constant-load creep tests in 550～650$\^{C}$ temperature range. The M-G parameters, m, m', C, and C' were proposed and discussed for the two alloy systems. The m value of the M-C relation was 0.90 in type 316LN steel and 0.84 in modified 9Cr-Mo steel. The m' value of the modified relation was 0.94 in type 316LN steel and 0.89 in 9Cr-Mo steel. Although creep fracture modes and creep properties between type 316LN and modified 9Cr-Mo steels showed a basic difference, the M-G and its modified relations demonstrated linearity quite well. The m' of modified relation almost overlapped regardless of the creep testing conditions and chemical variations in the two alloy systems, and the parameter m' was closer to unity than that of the M-G relation.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.28-33
• /
• 2007

The objective of this paper is to investigate the relationship between the short-term creep rupture time and the creep rupture properties at three different elevated temperatures in STS304 stainless steel. Uniaxial constant stress creep rupture tests were performed on the steel to observe the creep rupture behaviors at the elevated temperatures of 600, 650 and 700, according to the testing matrix. It is very important to predict creep life in practical creep design problems. As one of the series of studies on the statistical modelling of probabilistic creep rupture time and the development of creep life prediction techniques, the relationship between applied stress and creep rupture behaviors, such as creep strain rate and rupture time, were investigated. In addition, the Monkman-Grant relationship was observed between the steady-state creep rate and the creep rupture time. The creep rupture surfaces observed by SEM showed up dimple phenomenon at all conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1119-1124
• /
• 2009

This paper deals with the variability analysis of short term creep rupture test data based on the previous creep rupture tests and the possibility of the creep life prediction. From creep tests performed by constant uniaxial stresses at 600, 650 and $700^{\circ}C$ elevated temperature, in order to investigate the variability of short-term creep rupture data, the creep curves were analyzed for normalized creep strain divided by initial strain. There are some variability in the creep rupture data. And, the difference between general creep curves and normalized creep curves were obtained. The effects of the creep rupture time (RT) and steady state creep rate (SSCR) on the Weibull distribution parameters were investigated. There were good relation between normal Weibull parameters and normalized Weibull parameters. Finally, the predicted creep life were compared with the Monkman-Grant model.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.637-645
• /
• 2009

To understand the financial situation of waterworks, the revenue and operation cost from 1996 have been analyzed. The budget of waterworks was 3,775 billion won in 1996 and grew up to 5,774 billion won in 2007. The budget has grown about 1.53 times during 11 years. Based on 2007, total cost for supplying water, rehabilitating old facilities and returning debt and its interest was 4146 billion won. The cost was recovered by 2,825 billion won of water revenue, 827 billion won of various fees revenue, 571 billion won of financial grant and 89 billion won of loan. Until 2007, the 15.3% of operation cost for waterworks was covered by government grant and loan. The renovation cost for old non-efficient facilities was 1,356 billion won in 1996 and was 1,486 billion won in 2007. The renovation cost was not increased remarkably during 10 years. Since the total operation cost was increased about 1.5 times, the percentage for renovating old facilities was decreased from 36% to 25.7%. This trend need to be alerted because the renovation has been slow down when the facilities for water supply need more rehabilitation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3096-3103
• /
• 2000

High temperature material properties of a welded joint were experimentally studied. Tensile and creep properties were measured for each part of weld metal. HAZ(heat affected zone) and parent metal at 538$^{\circ}C$. HAZ metal was obtained by a simulated heat treatment. Results showed that the order of tensile strength is weld>HAZ> parent both at 24$^{\circ}C$ and at 538$^{\circ}C$. Creep resistance was also the highest for weld metal and lowest for parent metal. Creep rupture life curves were obtained and converted to Monkman-Grant relation which is useful for life assessment. Use of the data obtained in this study is discussed.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.645-664
• /
• 2009

This article is researched to analyze what kinds of projects were conducted by the special grant, the balanced development special account(BSDA), and the municipal projects in the case of Sangjucity and Seochengun, in the introduction time of the bock grants of BSDA and the municipal development plan in 2010. Furthermore this study presents the problems and the direction of improvement. For the territorial integration of a regional development in long-term, I suggest that the spacial grant and BSDA are necessary to be integrated because of ambiguous difference. And also the block grants of current 24 projects in 7 groups should be reclassified as the concept and the functional feature of pluralistic rural development.