• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.313-317
• /
• 2010

There are the farmer's needs to develop early-maturing cultivar adaptable to mid-northern inland plain and alpine area. Furthermore, it is required to develop a rice variety to produce new rice before concentrated marketing dates, even in the years of early Chuseok. 'Joun' is a new extremely early-maturing japonica rice cultivar developed in 2009 from the cross of SR14880-173-3-3-2-2-2/Unbong20 at Cheolwon Substation, National Institute of Crop Science (NICS), Rural Development Administration (RDA). The heading date of 'Joun' is July 23 in mid-northern alpine area, which is 7 days earlier than that of Odaebyeo. It has about 61 cm in culm length with semi-erect plant type. Panicle has a few awns and its exertion is good. The number of spikelets per panicle is smaller than that of Odaebyeo and 1,000 grain-weight of brown rice is 21.2 g which is less than 26.3 g of Odaebyeo, but the complete grain ratio is higher. Milled kernels are translucent with non-glutinous endosperm and palatability of cooked rice is good. It shows strong resistance to cold treatment, lodging, premature heading, wilting and viviparous germination during ripening stage. This cultivar shows resistance to leaf blast disease but susceptible to bacterial blight, virus disease and insect pests. The milled rice yield performance of 'Joun' is about 5.18 MT/ha by ordinary culture in local adaptability test for three years. This cultivar may be highly adaptable to the mid-northern inland plain and alpine area, north-eastern coastal area and middle plain area.

• Korean Journal of Breeding Science
• /
• v.43 no.5
• /
• pp.413-421
• /
• 2011

The main objective of this study was to develop the multi-resistance lines to insects(brown planthopper; BPH, rice green leafhopper; GRH) and disease(blast; BL, bacterial blight; BB and rice stripe virus disease;RSV) with good grain quality and plant type by combining conventional breeding and marker assisted selection(MAS) and to eliminate the linkage drag effects between Bph1 gene and culm length, we conducted MAS of Bph1 gene in advanced backcross and double cross progenies. 'Nampyeong', 'Junam' and 'Milyang220' were used as the parent in this study. 'Milyang220' was used as the donor of brown planthopper resistance gene Bph1 with tall culm length. Two backcross progenies were developed using two recipients 'Nampyeong' carrying GRH resistance gene Grh3(t) with good grain appearance and 'Junam' harboring bacterial blight resistance gene Xa3 with short culm length. Two $BC_1$ generations were resulted from the backcrossing of the $F_1$ plants with recurrent parents 'Nampyeong' and 'Junam'. The second rounds of backcrossing($BC_2$) were derived from the cross of selected resistant $BC_1F_1$ plants based on heterozygous genotype of RM28493 linked to Bph1 gene. The double crossed population was constructed from the cross of between each heterozygous $BC_2F_1$ plants at RM28493 locus of '$Nampyeong^*3$ / Milyang220' and '$Junam^*3$ / Milyang220'., The homozygous alleles in Bph1 gene were selected using co-dominant DNA marker RM28493 in double crossed population. Eighty-five lines with multi-resistance to BL, BB, RSV, GRH and BPH were selected by bio-assay and MAS in generation of double crossing. The culm length, head rice ratio and yield of the selected multi resistance lines was ranged from 71 to 88 cm, from 51 to 93%, from 449 to 629 kg/10a. respectively. We can select a promising multi resistance line similar with 'Nampyeong' of major agronomic traits such as culm legnth, head rice ratio and yield. It was designated as Milyang265. Finally this study was developed the multi resistant varieties against to insects and diseases with the good grain quality 'Milyang265' by the advanced backcross and double cross combining MAS and it can be used as genetic resources of multi-resistance to insect and diseases in rice breeding programs.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.97-107
• /
• 1981

This study was carried out in order to provide the basic data necessary to develop the effective and desirable cooking method on large scale for investigating the physical characteristics of cooked rices and studying optimum cooking conditions by pressure in kettle cooking rices. Milyang-15, local Japonica type and Milyang-23, high yielding Indica type major varieties cultivated in Korea were used as cooking sample after polishing 70% and 90% respectively, and the results obtained are summarized as follows. 1. The average moisture content of cooked rice by open kettle and pressure kettle method in typical households were 65.17% and 64.52%, respectively. 2. In water absorption capacity of rice grain Milyang-23 was 4.5% higher than Milyang-15, and maximum water content after absorption in Milyang-23 was 29.14%. 3. The expansion volume of cooked rice was changed proportionally by water absorption, heating temperature and time, and maximum expansion volume of cooked rice was 3.2 times greater than rice grain. 4. The gelatinization degree of cooked rice intensively concerning in hardness of rice grain was increased as water-to-rice ratio, heating temperature and time increased, and it was 0.44 in Milyang-23 and 0.64 in Milyang-15 under the optimum cooking conditions as 160% water-to-rice ratio, $0.2kg/cm^2$ cooking pressure and 25 minutes cooking time. 5. The hardness of cooked rice was decreased as water-to-rice ratio, heating temperature and time increased, and it showed 2.35kg/wt in 90% polished Milyang-23 and 2.0kg/wt in 90 polished Milyang-15 under optimum cooking conditions. For maintaining the same level of hardness of cooking rice Milyang-23 required 25% much more water than Milyang-15. 6. The elasticity of cooked rice was changed proportionally by water-to-rice ratio, heating temperature and time, and it appeared 19.2mm and 15.7mm in 90% polished Milyang-15 and Milyang-23 respectively. 7. The gumminess of cooked rice was decreased as water-to-rice ratio, heating temperature and time increased, and it showed 60 and 73 in 90% polished Milyang-23 and Milyang-15, respectively. 8. The optimum cooking time on differerent pressure in kettle took 25 minutes at $0.2kg/cm^2$, 20 minutes at $0.4kg/cm^2$, 15 minutes at $0.6kg/cm^2$, and 10 minutes at $0.8kg/cm^2$.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.69-78
• /
• 2008

Shearing strength test in tension type was investigated to determine the shear resistance of bolt and drift-pin connection of domestic larix glulam. The specimen was connected with bolt and drift-pin in the inserted plate type, and only bolt in the side plate type. The diameter of bolt and drift-pin used in the experiment are 12, 16 and 20 mm. The hole of bolt was drilled at the end-distance 5 d and 7 d. Tension load was loaded in the direction parallel to grain. The shear resistance was evaluated according to end-distance through this, the yield load was compared with the experimental yield load, using Larsen's formula. The prototype design strength is based on the yield load of end-distance 7 d and the reduction factor of end-distance 5 d was calculated. The results were as follows. 1. The average of maximum load of drift-pin connection was higher by 3~30% at the inserted type than at bolt connection with increasing diameter. In bolt connection, the average of maximum load of the side type was 1.54~2.07 times higher than that of the inserted type. In the same diameter, the average of maximum load of end-distance 7 d was higher by 8~44% than that of 5 d. 2. The bearing stress was 1.16~1.41 times higher at the inserted connection than at drift-pin connection, and 1.37~1.86 times higher at 7 d than at 5 d. Also, when the slenderness ratio was below 7.5 at drift-pin connection and below 6.0 at inserted connection, the lateral capacity was good. 3. The ratio of the experimental yield load and the predicted yield load calculated by Larsen's formula proposed by Larsen was 0.80~1.10 at inserted connection, and 0.75~1.46 at side connection. 4. When the inserted bolt connection was based on the yield load of end-distance 7 d, the reduction factor was 0.89 at 12 mm connection, 0.93 at 16 mm and 0.85 at 20 mm. The reduction factor was 0.89 at 12 mm the inserted drift-pin connection, 0.93 at 16 mm, 0.93 at 20 mm. The reduction factor was 0.79 at the side connection of the 12 mm bolt connection and 0.80 at 16 mm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.7
• /
• pp.652-657
• /
• 2006

Combining ability and heterosis for $F_{1}$ population obtained $5{\times}5$ half diallel cross in sesame were estimated for six quantitative characters. The parental varieties used for diallel cross were Yangbaek and Ansan of normal type, Suwon 177 and 195 of placenta adhesion type (PA) and SIG960320-5-1-1 of indehiscent type (ID). PA and ID type are shattering-resistant sesames and Yangbaek and Ansan are shattering sesames. The high heterosis of $F_{1}$ hybrids was expressed in the number of capsules per plant (NC), grain yield per plant (GY) and number of branches per plant (NB). Shattering.ate (SR) showed high positive heterosis toward increase of seeds shattering in all the combination of $F_{1}$ generation which was presumed because the characters connected with shattering resistance of seeds were governed by recessive gene. At the analysis of combining ability, highly significant general combining ability (GCA) effects were observed on all the characters in $F_{1}$ generation, significant specific combining ability (SCA) effects were observed on the NC, GY and SR. GCA variances were greater than SCA variance, which suggested that additive gene effects were greater than other nonadditive gene effects. Considering the estimated GCA effects, Suwon 195 (PA type) was found to be good parent for SR and GY, SIG960320-5-1-1 (ID type) was poor for GY and plant height. SCA effect for NC was great in Yangbaek/Suwon 195, SCA for GY was great in Ansan/SIG960320-5-1-1, and SCA for decrease of SR was great in Ansan/Suwon177.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.251-259
• /
• 1987

Humic acids extracted from decomposing plant residues were characterized by infrared(IR) spectra. The IR spectra were further interpreted by chemical analyses for oxygen-containing functional groups such as carboxyl, phenolic, alcoholic, carbonyl, and quinionic groups. 1. The IR spectra obtained in this study were divied into three categories: spectra of humic acids from grain crop straws of rice, barley, wheat and rye produced Type I, while that from wild grass hay yielded Type II, and those from forest tree litter of the deciduous and conifers were led to give Type III. 2. There were no significant changes in the absorption bands observed among humic acids extracted at various stages of decomposition of a given Plant material. 3. The absorption band at about $3,430cm^{-1}$ represents the presence of hydrogen-bonded hydroxyl groups, phenolic-OH groups being the major component. 4. A close relationship was found between the total acidity and the content of phenolic-OH groups of humic acids. The content of carboxyl groups maintains a direct relationship with the content of total hydroxyl groups, and such a close relationship also exists between the content of alcoholic hydroxyls and that of total hydroxyl groups. 5. Overlapping of the absorption bands of carbonyl groups and quinones renders it difficult to make differentiation between the two. 6. A variety of non-armoatic cyclic hydrocarbons appears to be a structural component as evidenced by a sharp absorption peak near $995-1000cm^{-1}$.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.5
• /
• pp.574-583
• /
• 2005

To investigate the importance and practice of well-being related dietary life pattern such as purchasing food materials, food habits and eating out, a survey was conducted by questionnaire and 5-point Likert score in Seoul and Gyeonggi-Do, September, 2004 and April, 2005. The responses of 732 housewives who were over 40 years were analyzed by SPSS package program. The results were as follows. Most of them were 40-49 years(74.4%), graduated highschool (66.6%) and their family type was nuclear family type(81.4%). Almost half of them had full-time job (37.1%) and part time job (15.4%). The average importance score of 'food habits', 'purchasing food materials' and 'eating out' were $4.15{\pm}0.91,\;4.06{\pm}0.96\;and\;3.25{\pm}1.01$ respectively. But the average practice score of 'food habits' was greater($3.58{\pm}1.06$) than 'purchasing food materials ($3.19{\pm}1.19$)' and 'eating out($2.54{\pm}1.05$)'. Among 5 types of 'food habits', the type of 'cut down on eating fast food' had the greatest score of importances ($4.31{\pm}0.97$) but the difference between importance and practice was greatest(0.94). Also 'consume home-made food rather than processed or ready to food' showed great scores in importance ($4.28{\pm}0.87$) and practice($3.87{\pm}1.04$). 'Consume fruits and vegetables rather than meats' and 'avoid heavy use of oils' had the importance score of $4.04{\sim}4.19$. But the practice score of 'avoid heavy use of oils' was the lowest($3.39{\pm}0.97$). Among four types of purchasing of food materials, 'purchase domestic agricultural food' was greatest($4.37{\pm}0.78$) and 'don't purchase genetically modified food' 'purchase organic food' and 'purchase whole grain products' were also great ($3.92{\sim}3.99$). But the practice score of 'purchase organic/low chemical foods($2.77{\pm}0.98$)' and 'don't purchase genetically modified food($2.99{\pm}1.41$)' were lowest. 'Go to well being restaurant' in three types of 'eating out' showed greatest in importance($3.35{\pm}0.96$) but the practice score($2.47{\pm}0.10$) was lower than the importance score. Also 'choose menu with comparing calories' had the lower score in practice($2.45{\pm}1.06$) rather than importance score($3.22{\pm}1.03$). In regarding to 'food habits', the importance score were significantly affected by type of food expense (p<0.05) and health status (p<0.05). The importance score of 'purchase food materials' were significantly affected by the type of food expense (p<0.001), type of residence(p<0.05), and self assessment of weight(p<0.05). Monthly income, especially more 400 million won, was the commonly significant effector in practice score of 'purchase food materials' and 'eating out'.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.57-66
• /
• 2013

The purpose of this study was to investigate the effects of shifts in sowing time on the ecological responses, growth and yields of major soybean cultivars in a southern region of South Korea. Experiments were carried out in Naju, Jeonnam Province (latitude $35^{\circ}$ 04'N, longitude $126^{\circ}$ 54'E) for three years from 2008 to 2010. The test cultivars included Saeol-kong and Tawon-kong of the summer type, Taekwang-kong and Pungsannamul-kong, and Cheongja3 of the autumn type. Sowing took place on May 15 and 30, June 15 and 30, and July 15 of each year. Of the summer type soybean cultivars, Saeol-kong showed a smaller curtailment in days from sowing to flowering, days from flowering to maturity, and days from sowing to maturity according to sowing time postponement than Tawon-kong. Of the autumn type soybean cultivars, Taekwang-kong exhibited a lower photoperiodic response in reproductive growth period than Pungsannamul-kong and Cheongja3, both of which recorded higher level photoperiodic responses in vegetative growth stages and reproductive growth periods than other test cultivars, with the former exhibiting higher levels than the latter. Most of the test cultivars tended to decrease in stem length, node numbers of the main stem, and stem diameter according to postponed sowing time, but there were no significant differences in stem length and node numbers of the main stem of the Saeol-kong cultivar. Differences in sowing times did not affect the first setting pod node order of Saeol-kong and Tawon-kong summer type cultivars of internode lengths of all of the test cultivars. All of the test cultivars tended to show decreases in pod number per plant due to postponement of sowing time except for the Saeol-kong cultivar. The variation was more prominent in small grain cultivars such as Tawon-kong and Pungsannamul-kong with the latter autumn type cultivar showing especially large variation. Yields were the greatest for the Tawon-kong, Taekwang-kong, and Pungsannamul-kong cultivars sown on May 30 and Cheongja3 sown on May 30 and June 15. There were no significant differences in the yields of Saeol-kong for different sowing times from May 30 to July 15, with the yields lowest for the batch sown on May 15.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.290-300
• /
• 2014

In this study, cross-laminated woods were made with spruce wood and the effects of annual ring angles of perpendicular direction laminae on static bending strength performance were investigated. Static bending strength performances of parallel laminated woods with all layers composed of laminae perpendicular to the grain ($P_{\bot}$ type) were in the order of $90^{\circ}$ > $0^{\circ}$ > $45^{\circ}$. The MOE and MOR for the $45^{\circ}$ annual ring angle were 0.0989 GPa and 3.25 MPa, and it showed the lowest values. By placing longitudinal-direction laminae in the core of $P_{\bot}$ type, the strength performances were markedly improved. In the case of cross-laminated woods with perpendicular-direction laminae in the faces ($C_{\bot}$ type), the bending strength performances were in the order of $90^{\circ}$ > $0^{\circ}$ > $45^{\circ}$, but the differences among annual ring angles were less than those of the parallel-laminated woods. In the case of cross-laminated woods with perpendicular-direction laminae in the core ($C_{\parallel}$ type), the bending strength performances were in the order of $45^{\circ}$ > $90^{\circ}$ > $0^{\circ}$ unlike $P_{\bot}$ type and $C_{\bot}$ type. The MOE and MOR for the $45^{\circ}$ annual ring angle were 12.0 GPa and 55.8 MPa, and it showed the highest values.