• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.45-54
• /
• 2000

The effect of electropolishing far stamped leadframe on the removal of the edge burr and residual stress relief was examined. The present study showed that the electropolishing could be used for enhanced surface quality of stamped leadframes. The electropolishing was performed at the condition of 60% phosphoric acid electrolyte, 5 ampere of current and 3 cm electrode gap at $70^{\circ}C$ for 2 minutes for Alloy42 type leadframe, and $50^{\circ}C$ for 1.5 minutes for C-194 type leadframe. The FWHM values from X-ray diffraction showed that residual stress of electropolished leadframe recovered to the level of as-received raw materials and surface roughness measured by using AFM tuned out to be improved by 0.079 $\mu\textrm{m}$ and 0.014 $\mu\textrm{m}$ ($R_{rms}$) far alloy 42 and C-194 type leadframes, respectively. The plated thickness using XRF showed the improved uniformity in thickness variation by 0.4~0.5 $\mu\textrm{m}$ and grain growth, which is favorable for interface adhesion, was also observed from the bake test samples. We could certify dimensional stability of leadframe with inspection by means of 3D-topography and hardness measurements.

• Journal of Life Science
• /
• v.23 no.4
• /
• pp.487-494
• /
• 2013

An AlaAT knock-out mutant (alaat) of rice (Oryza sativa L.) was isolated from T-DNA tagging lines and the genotypes of its progeny were determined with AlaAT1-specific primers. The alaat phenotypes showed decreased growth and grain yield when compared with control plants. The activity of AlaAT1 in the mutant plants was practically undetectable. The responses of alaat plants to growth under salt stress were compared with those of control plants by measuring chlorophyll fluorescence and the activities and mRNA expression of antioxidant enzymes. All abiotic stresses tested (salt, drought, and chilling) caused a similar decrease in chlorophyll fluorescence in both alaat and wild type plants. The activity of peroxidase (POX), an antioxidant enzyme, decreased following salt treatment of alaat plants, while control plant showed an increased activity. The mRNA levels for cAPX (cytosolic ascorbate peroxidase), POX2, and AlaAT were determined by RT-PCR following salt stress. No AlaAT1 mRNA was detected in alaat plants. The POX2 mRNA showed a slightly increased level in the wild type but was not detected in alaat plants, in agreement with the activity assays. The levels of cAPX mRNA were greatly increased in both the wild type and alaat plants. The salt stress effects on rice plant growth are therefore proposed to reflect a loss of function of AlaAT, which alters the activity and synthesis of antioxidant enzymes (especially peroxidases), rather than a direct effect on photosynthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.620-631
• /
• 1996

Bonding of resin to cast alloy has traditionally been provided by mechanical retention. But, chemical bonding methods such as silicoating, tin plating, heat treatment, application of 4-META adhesives, have been developed to overcome the problems of the mechanical bonding methods. Silicoating has been used availaby in fixed prosthodontics, but is also reported to be used in removable prosthodontics. The aim of this study is to measure the tensile bond strength between resin and metal, and compare the effect of the type of metal and the grain size of the aluminum oxide on the bond strength, after metal surface roughening, coating of the opaque resin, and curing of heat-curing resin were performed. The test groups were divided into 4 groups according to the cast alloys and the aluminum oxide particles used. Group 1 : Type 4 gold alloy(DM66) blasted with $$50{\mu}m\;Al_{2}O_3$$ Group 2 : Type 4 gold alloy(DM66) blasted with $$250{\mu}m\;Al_{2}O_3$$, Group 3 : Co-Cr alloy(Nobilium) blasted with $$50{\mu}m\;Al_{2}O_3$$ Group 4 : Co-Cr alloy(Nobilium) blasted with $$250{\mu}m\;Al_{2}O_3$$ * 10 test specimens were made on each group. The specimens were thermocycled, and Instron Universal testing machine was used to measure the tensile bond strength of the finished specimens. The results were as follows : 1. Bond strengths showed that the group of gold alloy blasted with $250{\mu}m$ aluminum oxide particle had higher bond strength, and the group of gold alloy blasted with $50{\mu}m$ aluminum oxide particles had lower bond strength than any of the other groups. 2. Gold alloy had significantly higher bond strength when blasted with $250{\mu}m$ aluminum oxide particles than $50{\mu}m$, but. Co-Cr alloy showed no statistically significant difference between the two particle sizes. 3. When blasted with $50{mu}m$ aluminum oxide particles, Co-Cr alloy showed significantly higher bond strength than gold alloy. And, when blasted with $250{\mu}m$ aluminum oxide particles, gold alloy had significantly higher bond strength than Co-Cr alloy. 4. On the examination of the fractured sites, only the group of Co-Cr alloy blasted with $50{\mu}m$ aluminum oxide particles showed a part of residual opaque resin, but all the samples of the other groups fractured between the resin and the metal.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.63-67
• /
• 2008

A new peanut cultivar "Jopyeong" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2006. It was developed from the cross between the very short stem cultivar "CUP brittle" and the high-yielding cultivar "Daekwang". "Jopyeong" which is Virginia plant type has 23 branch number per plant with early maturing and ellipse-shaped large kernel. Each pod has two grains with brown testa and 100 seed weight was 87g in the regional yield trials (RYT). This variety also showed more resistant to late leaf spots compared with check one. Especially it has resistance to lodging owing to short stem and erect plant type. In the regional yield trials "Jopyeong" was out-yielded than check variety by 11% with 8.37 ton/ha for fresh pod and by 4% with 3.95 ton/ha for grain.

• Journal of Animal Science and Technology
• /
• v.61 no.2
• /
• pp.69-76
• /
• 2019

Maize which has very high omega-6 fatty acid content has been used as a main feed grain for Hanwoo beef production to increase marbling, and thus omega-6 to omega-3 fatty acids ratio in Hanwoo beef is expected to be biased. To elucidate the current status of omega fatty acids ratio in Hanwoo beef, fatty acid profiles of neutral lipid and phospholipid fraction were analyzed separately using 55 Hanwoo steers' longissimus dorsi muscle slaughtered at Pyeongchang, Korea from Oct. to Nov. 2015. In addition, an association study was conducted to evaluate associations between single nucleotide polymorphism (SNP) markers from references and omega fatty acid profiles in phospholipid of Hanwoo beef samples using analysis of variance (ANOVA). In neutral lipid fraction, composition of saturated and monounsaturated fatty acids was higher and polyunsaturated fatty acids was lower compared to those in phospholipid fraction. The mean n-6/n-3 ratios of Hanwoo were $56.059{\pm}16.180$ and $26.811{\pm}6.668$ in phospholipid and neutral lipid, respectively. There were three SNPs showing statistically significant associations with omega fatty acid content. GA type of rs41919985 in fatty acid synthase (FASN) was significantly associated with the highest amount of C20:5 n-3 (p = 0.031). CC type of rs41729173 in fatty acid-binding protein 4 (FABP4) was significantly associated with the lowest amount of C22:2n-6 (p = 0.047). AG type of rs42187261 in FADS1 was significantly linked to the lowest concentration of C20:4 n-6 (p = 0.044). The total n-6/n-3 ratio of the steer which has all four SNP types in above loci (27.905) was much lower than the mean value of the total n-6/n-3 ratio in phospholipid of the 55 Hanwoo steers ($56.059{\pm}16.180$). It was found that phospholipid and neutral lipid of Hanwoo have very high n-6/n-3 ratios compared to the reported data from different cow breeds. Four SNPs in genes related with fatty acid metabolism showed significant associations with the fatty acid profile of phospholipid and may have potential as SNP markers to select Hanwoo steers in terms of n-6/n-3 balance in the future.

• Nutrition Research and Practice
• /
• v.15 no.1
• /
• pp.54-65
• /
• 2021

BACKGROUND/OBJECTIVES: This study aimed to develop healthy, appetizing high-protein snacks with enhanced isolated soy protein for diabetic patients and determine the blood glucose and insulin response after being consumed by these patients. MATERIALS/METHODS: Thirty adult patients aged between 30 and 75 years, with a ≤ 10-year history of type 2 diabetes and hemoglobin A1c of < 7.5%, were enrolled in this study. They made 3 clinical visits at one-week intervals. The control group consumed 50 g carbohydrates (white bread), whereas the test groups consumed high-protein grain (HP_G) or high-protein chocolate (HP_C) after an 8-hrs fast. Blood (2 ㎤) was drawn at 15, 30, 45, 60, 90, and 120 min before and after consumption to analyze the blood glucose and insulin concentrations. RESULTS: Compared to the commercial snacks, the developed high-protein snacks had below-average calorie, carbohydrate, and fat content and a 2.5-fold higher protein content. In diabetic patients who consumed these snacks, the postprandial blood glucose increased between 15 min and 2 h after consumption, which was significantly slower than the time taken for the blood glucose to increase in the patients who consumed the control food product (P < 0.001). Insulin secretion was significantly lower at 45 min after consumption (P < 0.05), showing that the high-protein snacks did not increase the blood glucose levels rapidly. The incremental area under the curve (iAUC), which indicated the degree of blood sugar and insulin elevation after food intake, was higher in the control group than the groups given the 2 developed snacks (P < 0.001), and there was no significant difference in insulin secretion. CONCLUSIONS: The results of the postprandial blood glucose and insulin response suggest that high-protein snacks are potential convenient sources of high-quality protein and serve as a healthier alternative for patients with type 2 diabetes, who may have limited snack product choices. Such snacks may also provide balanced nutrition to pre-diabetic and obese individuals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.2
• /
• pp.99-105
• /
• 1974

According to the content of sugar and starch of each positional leaf sheath and internode at heading and 4 weeks after it using IR667-Suwon 214 (high yielding var. having tropical Indica parantage) and Jinheung (local leading var. temperate Japonica) rice grown in various cultivation seasons the suitability of grouping into the high sugar type (sugar>starch), sugar, tendency (increasing tendency in sugar content), high starh type (starch>sugar) and starch tendency (increasing tendency in starch) in carbohydrate metabolism was reexamined as follows. 1. Sugar tendency appeared strongly in IR667 than Jinheung, internode than leaf sheath, late season cultivation than early season, 4 weeks after than heading and high temperature than low temperature. Thus at heading, leaf sheath and internode of Jinheung in early and late season cultivation were high starch type, and lower internode in early season cultiattion and leaf sheath and internode in late season for IR667 were high sugar type. In very late season all internodes of both varieties except 1st internode of Jinheung at heading were high starch type. At four week after heading all leaf sheaths except 1st and 4th one of Jinheung and all internodes were high sugar type. High sugar type was intensified 4 weeks after heading in leaf sheaths than in internodes of IR667 in early season and of both varieties in late season. 2. The upper three leaf sheaths and internodes seem to work in the same way for carbohydrate translocation. Among them upper ones showed sugar tendency at heading and starch tendency 4 weeks after heading and it was clear in Jinheung. 3. The later the cultivation season, the higher the carbohydrate content (sugar+starch), and such tendency was clear 4 weeks after heading and in IR667, suggesting teanslocation inhibition by low temperature. 4. Grain filling rate (weight increase per day) was more rapid in early season cultivation and IR667 took shorter days to reach maximum rate. 5. The later the cultivation season, the greater the percent contribution of carbohydrate before heading to yield and it was always greater in IR667, a leaf sheath type. 6. Sugar and starch ratio appears to be determined principally by metabolic characteristics of variety according to growth process and secondly but considerably by environmental factors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.18
• /
• pp.54-87
• /
• 1975

The effects of various weather factors on yield components of rice, year variation of yield components within regions, and regional differences of yield components within year were investigated at three Crop Experiment Stations O.R.D., Suweon, Iri, Milyang, and at nine provincial Offices of Rural Development for eight years from 1966 to 1973 for the purpose of providing information required in improving cultural practices and predicting the yield level of rice. The experimental results analyzed by standard partial regression analysis are summarized as follows: 1. When rice was grown in ordinary seasonal culture the number of panicles greatly affected rice yield compared to other yield components. However, when rice was seeded in ordinary season and transplanted late, and transplanted in ordinary season in the northern area the ratio of ripening was closely related to the rice yield. 2. The number of panicles showed the greatest year variation when the Jinheung variety was grown in the northern area. The ripening ratio or 1, 000 grain weight also greatly varied due to years. However, the number of spikelets per unit area showed the greatest effects on yield of the Tongil variety. 2. Regional variation of yield components was classified into five groups; 1) Vegetation dependable type (V), 2) Partial vegetation dependable type (P), 3) Medium type (M), 4) Partial ripening dependable type (P.R), and 5) Ripening dependable type (R). In general, the number of kernel of rice in the southern area showed the greatest partial regression coefficient among yield components. However, in the mid-northern part of country the ripening ratio was one of the component!; affecting rice yield most. 4. A multivariate equation was obtained for both normal planting and late planting by log-transforming from the multiplication of each component of four yield components to additive fashion. It revealed that a more accurate yield could be estimated from the above equation in both cases of ordinary seasonal culture and late transplanting. 5. A highly positive correlation coefficient was obtained between the number of tillers from 20 days after transplanting and the number of panicles at each(tillering) stage 20 days after transplanting in normal planting and late planting methods. 6. A close relationship was found between the number of panicles and weather factors 21 to 30 days, after transplanting. 7. The average temperature 31 to 40 days after transplanting was greatly responsible for the maximum number of tillers while the number of duration of sunshine hours per day 11 to 30 days after transplantation was responsible for that character. The effect of water temperature was negligible. 8. No reasonable prediction for number of panicles was calculated from using either number of tillers or climatic factors. The number of panicles could early be estimated formulating a multiple equation using number of tillers 20 days after transplantation and maximum temperature, temperature range and duration of sunshine for the period of 20 days from 20 to 40 days after transplantation. 9. The effects of maximum temperature and day length 25 to 34 days before heading, on kernel number per panicle, were great in the mid-northern area. However, the minimum temperature and day length greatly affected the kernel number per panicle in the southern area. The maximum temperature had a negative relationship with the kernel number per panicle in the southern area. 10. The maximum temperature was highly responsible for an increased ripening ratio. On the other hand, the minimum temperature at pre-heading and early ripening stages showed an adverse effect on ripening ratio. 11. The 1, 000 grain weight was greatly affected by the maximum temperature during pre- or mid-ripening stage and was negatively associated with the minimum temperature over the entire ripening period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.79-86
• /
• 1973

In order to investigate the heading responses of naked barleys and their grain yields under the different sowing times in spring sowing at 9 levels and to select the promising variety, present work was carried out with 11 recommended naked barley varieties and 2 newly developed lines for the period of 3 years from 1971 to 1973 at Iri, these results being summarized as follows: 1. Under spring sowing cultures, 'Wanju naked barley' being spring habit showed the highest yields among them. However, Sedohadaka and Bangju being winter habit were also considered as the promising varieties. 2. In the case of sowing the spring type naked barleys in spring the optimum sowing time of barleys at Iri was estimated in the late of February or the early of March. 3. The number of main culm leaves and tillering per hill of 'Wanju naked barley' were not influenced at sowing times. But winter type barleys being sown in spring, they were outstandingly increased in accordance with the sowing time being late, especially after the critical sowing time. 4. In comparison with average days from germinating to heading date under different seasonal sowing at the same variety, 'Wanju naked barley' took 64.4 days to get heading and Kikaihadaka and Hyangchoen gwa, the low spring growing habit varieties, 72-73 days. 5. Young spikelet differentiation stage (length of young spikelet: 0.3-0.5mm) arrived at about 30 days before heading date in comfortable sowing time without regarding spring or winter type. But number of main culms disclosed great differences among them; barleys being high spring type were 4 leaves and low about 6. 6. In the view of morphology, culm length under the different seasonal sowing could not be found out differences in the high spring type barleys, but in the low, it was grately shortened by postponing the sowing time. The barley height of rosette form had no difference at any sowing time.difference at any sowing time.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.3
• /
• pp.207-216
• /
• 2009

Three distinct types of fluid inclusions in amethyst and quartz crystals are associated with metamorphic events in the Korea Amethyst deposit from Uljin-Gun, Gyeongbuk Province. The amethyst displays bimodal grain size distribution in fine-grained, strain-free equigranular quartz with coarse-grained quartz grains with kink bands and undulose extinction. Type I inclusions are liquid-rich and salinity is 0~7 wt% NaCl and the homogenization temperatures ($T_h$) $91{\sim}231^{\circ}C$ with eutectic temperatures ($T_e$) $-52{\sim}-20^{\circ}C$. Type II inclusions are vapor-rich (80~90 vol%). The salinity and $T_h$ ranges 3~6 wt% NaCl and $230{\sim}278^{\circ}C$, respectively with $T_e$ $-56{\sim}-23^{\circ}C$. Type III inclusions contain a daughter mineral other than NaCl. The salinity ranges 32~36 wt% NaCl and $T_h$ $210{\sim}271^{\circ}C$. The textural and fluid inclusion evidences suggest that the host Buncheon granite gneiss and Amethyst pegmatite experienced dynamic recrystallization and the studied fluid inclusions are metamorphic in origin. The metamorphic event possibly occurred at higher temperature than $271{\sim}278^{\circ}C$. The amethysts from Uljin Korea Amethyst can be distinguished from the synthetic amethyst on basis of the distinctive two and three-phases fluid inclusions. Furthermore, it is noticeable that Korea amethyst do not contain NaCl-bearing and $CO_2$-rich fluid inclusions unlike those compared to those from Eonyang and Samcheonpo deposits related to unmetamorphosed granitic rocks.