• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.4
• /
• pp.353-358
• /
• 1994

Grain yields of errect-leaved corn hybrids were reported to be increased as planting density(PD) increased compared to those of horizontal leaf type hybrids. This trial was conducted to investigate the difference between errect and horizontal-leaved hybrids in response to different PD. Grain yields of both type hybrids were decreased at the highest PD, however, that of horizontal-leaved hybrid, Ga209 ${\times}$ Ki14A, was decreased more than errect-leaved hybrids which indicated varietal difference in response to PD. Responses to PD for days to tasseling, plant height, ear height, and leaf angle were not significant, also, PD ${\times}$ hybrid interactions were not observed. Yield components were decreased as PD increased and there were no PD ${\times}$ hybrid interactions for these characters. Leaf angle was negatively correlated with grain yield and yield components except for kernel weight.

• Journal of Powder Materials
• /
• v.14 no.1 s.60
• /
• pp.26-31
• /
• 2007

Manufacturing bulk nanostructured materials with least grain growth from initial powders is challenging because of the bottle neck of bottom-up methods using the conventional powder metallurgy of compaction and sintering. In this study, bottom-up type powder metallurgy processing and top-down type SPD (Severe Plastic Deformation) approaches were combined in order to achieve both real density and grain refinement of metallic powders. ECAP (Equal Channel Angular Pressing), one of the most promising processes in SPD, was used for the powder consolidation method. For understanding the ECAP process, investigating the powder density as well as internal stress, strain distribution is crucial. We investigated the consolidation and plastic deformation of the metallic powders during ECAP using the finite element simulations. Almost independent behavior of powder densification in the entry channel and shear deformation in the main deformation zone was found by the finite element method. Effects of processing parameters on densification and density distributions were investigated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.136-138
• /
• 2005

The responses of nanocrystalline aluminum powder of different grain sizes, was modeled Using, Khan, Huang, and Liang (KHL) viscoplastic model including hi-linear Hall-Petch type, based on experimental measurements. Correlation of strain-rate-dependent stress responses for different grain sizes were in good agreement with the experimental results.

• Applied Microscopy
• /
• v.1 no.1
• /
• pp.3-10
• /
• 1969

By the use of electron microscope, the study has beek made on the grain size in photo graphic emulsions, which are made at different temperature. It is found that ,the optimum temperature is $60^{\circ}C$, at which the average grain size obtained is the biggest. Also electron micrographs show NaCl-type crystal structure of AgBr and AgCl, as we expected.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.166-173
• /
• 1991

In order to determine the relationships between the rates of leaf senescence and photosynthate translocation during the grain filling periods in barley, field experiments were conducted through 1989/1990 crop year. Thirty barley varieties and lines having different leaf senescence were used for the experiments. Varieties differed significantly in the rate of leaf senescence and rate of grain filling. The rate of leaf senescence at early (10-20days after heading) and late period (20-30days after heading) during of grain filling were positively correlated with the rate of grain filling in same period, respectively. But the rate of leaf senescence at 10-20 days after heading negatively correlated with the rate of grain filling during the whole grain filling period (10-35 days after heading). Whereas, the rate of leaf senescence at late period was positively associated with the rate of grain filling during the whole grain filling period. Rates of grain filling at the late and whole periods have positively influence on grain weight(r=0.62**～-0.93**), but rate of leaf senescence at early period and duration of grain filling negatively correlated with the grain weight (r=-0.33～ -0.15). The patterns of leaf senescence index for the varieties tested were grouped by four. Among these patterns, the most ideal pattern was IV type.

• Journal of Korea Foundry Society
• /
• v.14 no.6
• /
• pp.530-540
• /
• 1994

Aluminium-silicon alloy(JIS AC8A) matrix composites reinforced with SiC particles were fabricated by spray-cast forming process, and the microstructure of powders and preforms produced were studied by using an optical and scanning electron microscopy. SiC particles were co-sprayed by mixed phase injection method during the spray casting process. Most of the composite powders formed by this mixed phase injection method exhibit morphology of particle-embedded type, and some exhibits the morphology of particle attached type due to additional attachment of the SiC particles on the surface of the powders in flight. The preforms deposited were resulted in dispersed type microstructure. The pre-solidified droplets and the deposited preform of SiC-reinforced aluminium alloy exhibit finer equiaxed grain size than that of unreinforced aluminium alloy. Eutectic silicons of granular type are crystallized at the corner of the aluminum grains in the preforms deposited, and some SiC particles seem to act as nucleation sites for primary/eutectic silicon during solidification. Such primary/eutectic silicons seem to retard grain growth during the continued spray casting process. It is envisaged from the microstructural observations for the deposited preform that the resultant distribution of SiC injected particles in the Al-Si microsturcture is affected by the amount of liquid phase in the top part of the preform and by the solidification rate of the preform deposited.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.71-79
• /
• 1998

Silty tidal rhythmites were found from the upper Pleistocene sequence unconformably overlain by the Holocene tidal deposits within the macrotidal coastal zone of Youngjong Island, western coast of Korea. The rhythmites occur as vertically accreted, parallel and planar laminae that are 0.1-2.5 mm in thickness. Each lamina grades from coarse silt (mean grain size: 5-6.5 ${\phi}$) at the lower part into fine silt to mud (mean grain size: 6-7.5 ${\phi}$) at the upper part. The rhythmites can be classified into two types based on the patterns in laminar thickness variation. Type I is a bundle of 12-20 laminae in which laminar thickness varies sinusoidally. Type ll is an alternation of thick and thin laminae as a couplet. Type I is inferred as a product of varying tidal energy during a semimonthly (neap-spring) tidal cycle, in which thicker laminae were deposited during spring tides and thinner laminae were formed during neap tides. Type ll is interpreted to have been formed by asymmetric semidiurnal tidal currents in association with diurnal inequality, whereby thick lamina of each couplet represents dominant tidal current and the thin lamina reflects subordinate tidal current.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.48-59
• /
• 1981

The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.361-365
• /
• 2000

This study was carried out to evaluate yearly variation and stability of yield and yield components of fifteen rice varieties. Yield stability and universal variety parameter of rice varieties were utilized for statistical model developed by Stroike, Grafius, and Finlay respectively. The lowest yearly variation based on coefficient of variation was found in Dasanbyeo for number of panicles/hill, in Jodongji for number of grains/panicle, in Yongmoonbyeo for ripened grain ratio, in Nagdongbyeo for 1,000 grain weight, and in Dasanbyeo for grain yield. Stability analysis by Stroike and Johnson's model revealed that Ilpumbyeo, Hwaseongbyeo, Dongjinbyeo in Japonica type, and And-abyeo and Dasanbyeo in Tongil type had the higher stability above average. Universal varieties analyzed by Grafius model were Ilpumbyeo, Dongjinbyeo, Hwaseongbyeo, Nagdongbyeo, and Jodongji in Japonica, and Dasanbyeo and Samgangbyeo in Tongil type. Damageum, Dongjinbyeo, Hwaseongbyeo and Ilpumbyeo in Japonica, and Dasanbyeo and Yongmoonbyeo in Tongil type were found to be highly stable as analyzed by Finlay ＆ Wilkinson's model. In conclusion, with reference to both grain yield and stability based on above three methods, Ilpumbyeo, Hwaseongbyeo, and Dongjinbyeo in Japonica, and Dasanbyeo in Tongil type were evaluated to be highly year-stable and high-yielding.

• Current Research on Agriculture and Life Sciences
• /
• v.21
• /
• pp.23-29
• /
• 2003

Worldwide consumption of vegetable soybean bas been increasing recently, hence it is necessary to produce good quality of soybean in our farms. In the process of vegetable soybean production threshing and seperation work accounts for about 80% of overall labor. Therefore, developing of the vegetable soybean thresher is necessary to reduce the cost of labor. The purpose of this study is to acquire the basic informations to design of the vegetable soybeans-thresher. We make the experimental system which measure the physical properties and investigate the detachment forces. Also, We calculated the minimum speed of threshing cylinder. The result are as follows; 1. The average length of soybean stem is 68.2cm. 2. The length of soybean pods are seen as 61.3mm for 3 grain, 52.6mm fer 2 grains and 41.0mm fer 1 grain 3. The widths of soybean pods are seen as 14.1mm fer 3 grain, 13.8mm fer 2 grains and 13.4mm fer 1 grain. 4. The weights of soybean pods are seen as 4.1grams for 3 grains, 2.7grams for 2 grains and 1.4grams for 1 grain. 5. The average detachment forces of pods are seen as 1.5kgf for 3 grains, 1.2kgf for 2 grains and 0.8kgf for 1 grain respectively For 1 grain, the detachment force of pods ranges from 0.2kgf to 1.4kgf. For 2 grains, the minimum detachment force of pods is seen as 0.6kgf and the maximum one is seen as 2.5kgf. For 3 grains, the minimum detachment force of pods is seen as 0.7kgf and the maximum one is seen as 2.7kgf. 6. The minimum speed of threshing cylinder is shown 6.83m/s.