Kim, Dong-Kwan;Jin, Il-Doo;Kim, Yeon-Gyu;Min, Kyung-Soo;Jung, Byung-Gwan;Kim, Yong-Jae
한국작물학회지
/
제47권1호
/
pp.29-35
/
2002
This study was carried out to investigate the characteristics of shattering habit and germination of offtype rice plants collected in Korea which were classified into seven groups based on grain characteristics. In the long-grain red rice group, the short-grain red rice group, the long-grain normal rice group, and the long-grain waxy rice group, the tensile strength of grain and primary rachis branch was relatively low and the fiber cell of the primary rachis branch was short. Characteristics of shattering-related traits and germination in relation to grain and esterase isozyme zymogram type of off-type rice plants. In most lines of the extremely late and sterile rice group, the tensile strength of grain was low, while that of primary rachis branch was high, and the fiber cell was long. However, in the type 1 esterase isozyme zymogram(EIZ) lines among the long-grain normal rice group and the type 6 and 5+6 EIZ plants among the extremely late and sterile rice group, the tensile strength of grain was relatively higher. The long-grain waxy rice group and the type 3 EIZ lines among the long-grain red rice group, showed higher germinability than did cultivars which are known to germinate well even in low-temperature. The other off-type rice group, except for the short-grain waxy rice group and type 1 and 7 EIZ lines among the long-grain normal rice group, had higher germination speed than that of the cultivars.
Islam, M.R.;Ishida, M.;Ando, S.;Nishida, T.;Yoshida, N.;Arakawa, M.
Asian-Australasian Journal of Animal Sciences
/
제17권2호
/
pp.183-192
/
2004
The effect of eight varieties of grain and forage type whole crop rice (Oryza sativa L Japonica) each harvested at four stages of maturity were investigated for morphology and yield, proportion of botanical fractions, fermentatability and chemical composition in an $8{\times}4$ factorial experiment. All crops were sown in 1997 at Saitama Prefecture, Japan under identical condition and harvested on 10, 22, 34 and 45 days after flowering in 1998. Total DM yield of forage type varieties was similar to that of the highest yield of grain type varieties. However, while yield of forage type varieties was attributed to higher proportion of straw than head, the reverse was in the case of grain type varieties. Yield in line with the proportion of head increased (p<0.001), but in contrast proportion of straw decreased (p<0.001) with the increase in maturity. Silage fermentability of grain type varieties was better than forage type varieties. Fermentability improved with the increase (p<0.001) in maturity suggesting that the moisture content should be reduced to improve fermentation quality. Forage type varieties contained higher (p<0.001) ash, crude fat (EE), organic cell wall (OCW) and acid detergent fiber (ADF), but contained lower crude protein (CP), organic cell content (OCC), CP in OCC and nitrogen-free cell wall extract (NCWFE) than the grain type varieties. The ash, CP, EE, Oa (60% digestible OCW), Ob (40% digestible OCW), OCW, ADF and acid detergent lignin (ADL) decreased (p<0.001), but OCC and NCWFE increased (p<0.001) with the increase in maturity. It is concluded that stage of maturity not only increases yield and proportion of head, but also improved the fermentation quality and increases quality chemical composition (except CP) of whole crop rice. Forage type varieties may be as good as grain type varieties in terms of yield, but fermentation quality and chemical composition may not be as good as that of grain type varieties.
우리 나라에서 재배되고 있는 주요 벼품종들의 입형을 조사하여 입형에 따른 품종군을 구분하고 도정율과 발의 상품가치를 높히고자 1995년 경기도 여주군 가남면 건국대학교 농과대학 실습농장에서 47개의 주요 품종을 재배, 수확하여 실험한 결과를 요약하면 다음과 같다. 1. 공시품중의 현미 장폭비는 1.57∼2.25범위로서 통일형 품종을 제외하면 장폭비가 모두 2.0이하의 단원형에 속하였다. 2. 단립(장폭비 2.0이하)에 속하는 품종들의 평균 장폭비는 1.77, 변이계수는 4.79%로서 입형의 균일도에 차이가 심하였다. 3. 현미의 장폭비에 의하여 1군은 1.75이하, 2군은 1.76∼l.80, 3군은 1.81∼l.90, 4군은 1.91∼2.00, 5군은 2.01 이상으로 5등급하면 현재 분류방법보다 더 균일한 입형을 가진 품종군으로 분류할 수 있었다. 4. 1군과 2군에 속하는 품종들은 도정시 체눈의 크기가 1.7mm(001체)를 사용하는 것이 도정율과 쌀알의 균일도를 높일 수 있으며 3군과 4군에 속하는 품종들은 체눈의 크기가 2.0mm를 사용하는 것이 좋았다. 5. 쌀의 이화학적 및 취반특성은 품종 고유의 특성으로 위에서 분류한 등급간에는 뚜렷한 차이가 없으며 일반적으로 1군에 속하는 품종들이 밥맛이 좋다고 평가되었다.
The aim of this study was to investigate the effects of density, temperature, size, and grain direction on measurement of moisture contents (MC) of wood materials non-destructively. The MC of different sizes of solid wood, glulam, and CLT from larch (larix kaempferi, $560kg/m^3$) and pine (pinus koraiensis, $430kg/m^3$) were measured using the dielectric type and resistance type meters. The specimens were conditioned in the environmental chamber to be equilibrium moisture content (EMC) of 12 % and 19 %. When density setting in dielectric type meter was increased from $400kg/m^3$ to $600kg/m^3$, the MCs of specimen (S-L-100-E) were decreased from 13.4 % to 11.3 %. However, when wood group (WG) setting in resistance type meter was changed from WG1 to WG4, the measured MCs were increased from 9.2 % to 12.3 %. When temperature setting in resistance type meters was changed from 0 to $35^{\circ}C$, the MC was decreased from 17.0 % to 13.0 %. The MCs measured by dielectric type meter for larger specimens (S-L-100-E_11.3 %, G-L-240-E_11.7 % and C-L-120-E_12.8 %) were higher than those of small size specimens (S-L-30-E_8.7 %, G-L-150-E_10.3 %, and C-L-90-E_9.7 %). The MCs measured by resistance type meter for larger specimens (G-L-240-E_11.6 % and C-L-120-E_13.3 %) were also higher than those of small size specimens (G-L-150-E_10.4 %, and C-L-90-E_11.8 %). The resistance type meter was not affected by the grain direction but the dielectric type meter were affected by the grain direction. The MC measured by resistance type meter for G-L-120-E perpendicular to grain direction was 11.5 % and the measured MC parallel to grain direction was 11.3 %. The MC measured by dielectric type meter parallel to grain direction (12.1 %) was higher than that measured perpendicular to grain direction (10.7 %).
This study was carried out to develop the throw-in type thresher with its size as small as possible. Developing the smallest possible size of the throw-in type thresher has been very important to increase mobility and to reduce the machine price. The thresher that developed for this purpose was tested as to threshing and separation performance for the samples collected in eight catch boxes under the concave while threshing. The amount of grain collected in each compartments was measured and the threshing and separating pattern along the total span of the threshing drum was determined. The performance of separating and threshing units of the test thresher and threshing loss was evaluated by use of the developed grain separating apparatus and the method for measuring the grain separating performance of threshers. The results are summarized as follows; 1. The unthreshed grain (drum losses) and semi-threshed grain did not appeared at all throughout the treatments. 2. When threshed by making use of the developed throw-in type thresher, the threshing grain loss at about 25 per cent grain moisture was about one-half when threshed at about 18 per cent grain moisture. 3. And its grain separating loss in higher feed rate was decreased in comparison with that of lower feed rate. These results suggests that the throw-in type thresher may be suitable for wet threshing and for higher feed rate of threshing. 4. Above 60 per cent of total grain passing through concave fell through the screen within a scant 30 cm from the feeding inlet. This threshing pattern may suggest that major threshing action may be finished before about one third of cylinder length. The required separating load extended over the whole drum span is so defferent that separating elements should be redesigned so as to accomodate this variable pattern of separation load. 5. It was apparent from the experiment that the length of the threshing drum of the throw-in type thresher could be reduced from 1285mm to about 1050mm without increasing grain separation loss greatly.
농가포장에서 발생하는 벼 이형주군별 발생포장 비율과 발생량 및 형질특성은 다음과 같다. 1. 우리나라의 지역별 발생포장 비율은 남서부, 남동부, 중부지방 순 이었고, 발생량은 남부지방이 중부지방보다 많았다. 2. 우점 이형주군은 단립적미군, 극만생 불임군, 장립적미군 순이었고, 장립적미군은 전남과 경남, 극만생 불임군은 전북, 단립적미군은 나머지 지역에서 우점하였다. 3. 대부분 이형주군의 간장은 인근 농가의 재배벼보다 길었는데, 특히 장립적미군과 단립적미군이 길었다. 4. 수당 영화수는 이형주군이 재배벼보다 많은 경향이었는데, 특히 극만생 불임군과 장립메성군이 많았다. 그러나 이형주군들은 대체로 불임이 심했다.
The thermal conductivies of grain are influenced by many physical factors such as' initial temperature, moisture content, composition, bulk density or porosity of grain. However, not only few researchers considered all these factors in determining thermal conductivities of grain but also many researchers considered only moisture content as a major effective factor on the thermal conductivity. This study was conducted to experimentally determine the thermal conductivities of rough rice (3 Japonica-type, 3 Indica-type) and barley(covered, naked) as a function of initial temperature, moisture content and porosity of grain, and to investigate the effect of those physical factors on the thermal conductivities of grain. The results of this study are summarized as follows; 1. The average time correction value for this experimental apparatus was 7 sec, which. was insignificant to the calculated thermal conductivity. The resulting conductivity for considering time correction value was only 4.9 percent higher than that calculated by the non-corrected equation. 2. The thermal conductivity was in the range of 0.1208~0.2058W/$m^{\circ}K$ for naked barley, 0.1138~0.1724W/$m^{\circ}K$ for covered barley, 0.0912~0.1864W/$m^{\circ}K$ for Japonica-type rice and 0.086~0.1774W/$m^{\circ}K$ for Indica-type rice. 3. The thermal conductivities of grain increased with initial temperature and moisture content of grain but decreased with porosity of grain. 4. The regression equations of the thermal conductivity of each grain were determined as a function of initial temperature, moisture content and porosity. The regression equations of the thermal conductivity of both Japonica-type and Indica-type rough rice were also determined.
The physical properties of grain are very important for the design of handling, sorting, processing, and storage system. On the physical properties of grain, volume, bulk density, true density, specific gravity, and porosity arc the major factors affecting the thermal properties of grain. This study was conducted to determine experimentally the above physical properties of rough rice (3 Japonica-type, 3 Indica-type) and barley (covered, naked) as a function of moisture content ranged from about 10% to 25% (w.b). The results of this study are summarized as follows; 1. The volume of grain kernel increased with moisture content for both rice and barley. The volume of those grain kernel was in the range of $2.2068{\times}10^{-8}{\sim}3.3960{\times}10^{-8}m^3$ at the moisture content of 14%. 2. The bulk density of rice increased linearly with moisture content for Japonica-type rough rice and quadratically for Indica-type rough rice, but the bulk density of barley decreased linearly with moisture content. The bulk density of the grain was in the range of 501.14~689.13kg/$m^3$ at the moisture content of 14%. 3. The true density of whole grain decreased linearly with moisture content, and was in the range of 1019.49~1139.75kg/$m^3$ at the moisture content of 14%. 4. The porosity of rice decreased linearly with moisture content for Japonica-type rough rice and quadratically for Indica-type rough rice, but the porosity of barley increased linearly with moisture content. The porosity of the grain was in the range of 39.51~50.83% at the moisture content of 14%. 5. The regression equations of the physical properties such as volume, bulk density, true density, and porosity of the grain were determined as a function of moisture content.
본 연구는 일체형 곡물 건조/저장 시스템에 채용되고 있는 Straight Type Sweeping Auger에 대한 성능과 적합성 검사를 실험을 통하여 검증하였다. 일체형 곡물 건조/저장 시스템의 핵심 기술은 선입선출을 가능토록 하는 Sweeping Auger의 설계기술에 있다. 바람직한 Sweeping Auger의 설계방향을 제시하기 위하여 Straight Type Sweeping Auger가 곡물 속에서 회전할 때 원주면에서 유동하는 곡물의 거동을 알아보기 위한 실험을 실시하고 결과 분석을 통하여 원인규명을 하였다.
Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.