In Korea, groundwater quality is monitored through National Groundwater Quality Monitoring Network (NGQMN) administered by Ministry of Environment. For a given contaminant, compliance to groundwater quality standards is assessed on a annual basis by monitoring the number of incidents that concentration exceeds the regulatory limit. However, this approach provides only a fractional information about groundwater quality degradation, and more crucial information such as location and severity of the contamination cannot be obtained. For better groundwater quality management on a watershed, a more spatially informative and intuitive method is required. This study presents two statistical methods to convert point-wise monitoring data into information on groundwater quality status of a watershed by using a proposed grading scale. The proposed grading system is based on readily available reference standards that classify the water quality into 4 grades. The methods were evaluated with NO3-, Cl-, and total coliform data in Geum River basin. The analyses revealed that groundwater in most watersheds of Geum River basin is good for domestic or/and drinking with no treatment. But, there was notable quality degradation in Bunam seawall and So-oak downstream standard watersheds contaminated by NO3- and Cl-, respectively.
Jihun Kim;Yeonhak Kim;Taewook Lee;Eunseok Kim;Gi Young Yang
Journal of Acupuncture Research
/
v.40
no.2
/
pp.167-175
/
2023
This study aimed to report the effect of moving cupping therapy (MCT) on peripheral facial palsy (PFP). Four patients with PFP treated with MCT combined with integrative Korean medicine treatment (KMT). Patients were hospitalized for < 17 days. House-Brackmann Grading System (HBGS), Yanagihara grading score (Y-score), and Sunnybrook Facial Grading System (SBGS) were used to assess the changes during treatment periods, and facial photos were taken at admission, interim, and discharge. Facial paralysis symptoms and HBGS grades improved in all patients (Patient 1: HBGS of IV to II; Patient 2: HBGS of V to III; Patient 3: HBGS of IV to II; Patient 4: HBGS of IV to II) following an average of 14.5 days of treatment. The mean (± standard deviation) Y-scores and SBGS scores also increased (Δ[Y-score]: 13.75 ± 3.50 and Δ[SBGS]: 40.00 ± 13.11) from baseline to end of treatment. These findings suggest the clinical effectiveness of MCT combined with integrative KMT in treating patients with PFP.
Modern society is prevailed a lot of allergies. So, the allergy test is very important. There are many kinds of allergy test. A doctor usually uses skin allergy test among many allergy tests. However, little standadization and objectivity of grading-standard has been established in the skin allergy test. A measurement of the reaction area has been a major objective to perform skin allergy test. Recently, a doctor's method is to measure the reaction area after drawing a line that represents the reaction area on the skin. But this method differs slightly from the real reaction area and individual doctor's measurement is different, because the edge of the reaction area is obscure. In this paper, we propose a algorithm which is able to detect vague edges using the fuzzy set. The algorithm that detects the line and curve is proposed first. Here, the maximum value is calculated by comparing the membership function of the line and curve seperately. We also encode the direction of the line and curve by using 8-direction code. Then, we calculate the reaction area by measuring the pixels which are inside the reaction area. And finally the Allergy grade is decided by grading-standard, and we accomplish faster, the 80re accurate and objective allergy grade decision.
Journal of Physiology & Pathology in Korean Medicine
/
v.27
no.2
/
pp.167-172
/
2013
In order to establish the diagnostic indices of skin diseases, some physiological and pathological concepts of interstices(腠理) were researched based on , and western dermatology with etymological analysis. As physiological indices for diagnosis of skin diseases, measurement of epidermis and dermis using ultrasonogram in the zhongwan and dachui's location. And for grading looseness and fineness of interstices with 3 unsound groups, measuring numbers and sizes of sweat pores in each point's 1 cm diameter circular area using comparative method and palpation assessment. Another index is superficial temperature. As pathological indices for diagnosis, validating volumes of dead skin cells and grading degrees of atrophy and degeneration of skin lesion. And as supplementary measures, absorptive degrees of cosmetics on face should be recorded according to 3 grades. These diagnostic indices can contribute to establishment of standard pattern identification and prescription of skin diseases through converting anatomical cognizance into classical concepts of interstices objectively.
The research, aiming an automatic pattern design of Korean Costume by utilizing CAD system, tried Grading, Seaming and Marking with a theme of girl's color-strip blouse & skirt. The content & conclusion of the research can be outlined as follows; 1) As we reviewed the current situation of Korean costume which becomes more likely celebrational or festival costume, while the demand of it is getting increase, it's being dealt mostly as ready-made dresses with different qualities & designs. Especially childrens ready-made ones were highly demanded to be picked up as the theme. 2) For the original drawing of children's color-strip blouse & skirt, Kyung-Ja Park's drawing method was used here, and for the substitute of particular body parts absolute size, Joo-Won Lee's standard size chart from a size-study by ages. 3) To work with CAD system we had input master pattern, drawn for age 5 as basic size, then graded six step-sizes for 1-11 years old. For add-subtract of particular body parts size, we graded through computing the standard variation among items to get the pattern developed into ready-made standard size, we can make precise plotting by grading wanted size very rapidly if we correct the rule of changed items different from standard size to make utilization possible enough with easy order method of ready-made Korean Dress. 4) We produced Marker after attaching a margin to seam accordingly by parts for each pattern using P/D/S to mark, In mass gament-cutting, the loss of time and material can minimized. In this research the apparel CAD system which has been utilized and only be western fashion industry was introduced for the design of ready-made Korean costume and utilized it in Grading, Marking which are critical steps to improve productivity and have reported the result in the research. Thus we expect that less cost, improved productivity and better quality with minimized loss of material from marking as well as from prompt and precise size-drawing. Furthermore the utilization of CAD system is considered as an effective one in terms of the research & the development to remove effective one in terms of the research & the development to remove irrational elements in the design and production process of Korean costume as well as in terms of the study of Korean Costume development through creative works of Korean Costume.
Journal of the Korean Institute of Intelligent Systems
/
v.12
no.2
/
pp.151-156
/
2002
There are two methods in evaluation student s achievement. The two evaluation methods are absolute evaluation and relative evaluation. They have much advantages respectively, but also have some limitations such as being too stereotyped or causing overcompetition among learners. This paper suggests a new evaluation method which evaluates student s achievements by considering the score distribution and the frequency The proposed method classifies the scores into several clusters considering the goodness. This approach calculates the goodness by applying the RE(relaxation error), and grades the achievement scores based on the goodness. The suggested method can avoid the problem of grading caused by the narrow gap of scores because it sets a standard for grading by the calculated goodness considering the score distribution and frequency of occurrence. The method can differentiate achievements of a school from those of others, and that it is useful for selecting advanced students and dull ones, and for evaluation of classes based on student s achievement.
Journal of the Korean Society of Clothing and Textiles
/
v.12
no.3
s.28
/
pp.319-331
/
1988
The purpose of this study was to develop a computer program for pattern making of women's Dooroomaky. The following results were given through utilizing the Computer in pattern making of Dooroomaky for women. 1. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern making. 2. Basic pattern was drafted by the hand-operation. In this study, this Dooroomaky basic pattern was selected. And a computer program for drafting was developed. Refer to
1. 3. Basic points which can be connected to depict basic pattern are represented with the numerical expression and the curved lines consist of the types of Arc Command. 4. In order to draft straight lines of the basic pattern, relative co-ordinate values of all standard points were prescrived and each two standard points were connected in straight lines respectively. 5. The patterns of Dooroomaky were automatically depicted by inputting the standard size (large, medium and small) find body measurement for pattern(bust girth, center back length, sleeve length, Dooroomaky length). 6. Grading of standard size was accomplished by using same method.
Egg grading is determined by exterior and interior quality. Among the evaluation methods for the egg quality, a candling method is common to identify eggs with cracked shells and interior defects. But this method is time-consuming and laborious. In addition, practically, it is challenging to detect hairline and micro cracks. In this study, an on-line inspection system based on acoustic resonance frequency analysis was developed to detect hairline cracks on eggshells. A roller conveyor was used to transfer eggs along one lane to the impact position where each of eggs rotated by the roller was excited with an impact device at four different locations on the eggshell equator. The impact device was consisted of a plastic hammer and a rotary solenoid. The acoustic response of the egg to the impact was measured with a small condenser microphone at the same position as the impact device was installed. Two acoustic parameters, correlation coefficient for normalized power spectra and standard deviation of peak resonant frequencies, were used to detect cracked eggs. Intact eggs showed relatively high correlations among the four normalized power spectra and low standard deviations of the four peak resonant frequencies. On the other hand, cracked eggs showed low correlations and high standard deviations as compared to the intact. This method allowed a crack detection rate of 97.6%.
The standard of quality was required to promote the consumption of potato and produce the high quality processing products. It will contribute the stability for processing products and the marketability of potato. The quality was determined based on size of tuber and content of dry matter. Even though the criteria of potato quality was involved many characters of tubers, the most important things were grading and packing of potato to create the consumption. For processing of raw materials, the standard of tubers had create between producer and processor according to size of tuber and content of dry matter. The evaluation of quality was performed over the standard to enhance the control of quality. In addition, the seed potato should be taken the evaluation to disease in the field during the period of cultivation and managed under the strict regulation in storage before release to farmer. Then, the producer of seed potato will make a good relationship to farmer with high quality tubers.
365 pieces of domestic $38{\times}140{\times}3600mm$ Red pine structural lumber were machine graded conforming to a softwood structural lumber standard (KS F 3020). The allowable bending stresses calculated for each grade were compared with the values currently tabulated in the standard. Four calculation methods for lower $5^{th}$ percentile bending stress were non-parametric estimation with 75% confidence level, 2-parameter and 3-parameter Weibull distribution fit, and bending modulus of rupture (MOR)-modulus of elasticity (MOE) regression based method. Only the data set of Grades E8, E9, and E10 were statistically eligible for the $5^{th}$ percentile calculation. The MOR-MOE regression based method only was able to estimate the lower $5^{th}$ percentile values theoretically for the full range of grades. The results showed that all allowable bending stresses calculated were lower than the design values tabulated in the standard. This implies that the current machine grading system has the pitfall of structural safety. Improvement in current machine grading system could be achieved by introducing the bending strength and stiffness combination grade system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.