• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.270-273
• /
• 2011

Water management is important in proton exchange membrane fuel cell because the water balance has a significant impact on the overall fuel cell system performance. In fuel cell vehicle, the vehicle's power demand is dynamic; therefore, the dynamic water management system is required. This present study proposes a method to control the humidity of the input air in cathode side of the fuel cell vehicle. The simulation using several driving cycles shows the proposed air humidification control obtains a relatively good result. The liquid saturation level is seen constant at the target level although still there are small deviations at driving cycles which having averagely high power demands.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권12호
• /
• pp.567-572
• /
• 2005

This paper presents a scheme to design optimal placement of phase-shifting transformers for power system congestion problems. A good design of phase-shifting transformers placement can improve total transfer capability in interconnected systems. In order to find the optimal placement of phase-shifting transformers, the power flows of the interesting transmission lines are evaluated using sequential quadratic programming technique. This algorithm considers power balance equations and security constraints such as voltage magnitudes and transmission line capacities. The proposed scheme is tested in 10 machines 39 buses and IEEE 57 buses systems. Test result shows that the proposed method can find the optimal placement of phase-shifting transformers to solver power system congestion problems.

• Elastomers and Composites
• /
• 제31권2호
• /
• pp.111-121
• /
• 1996

The characteristic of silicone rubber can be seen from its resistance to both low and high temperature, whereas HNBR is resistant only in high temperature moderatly although it can be compounded to give good tensile properties, good oil resistance while silicone rubber severely lacks in these qualities. This study was initiated a balance of properties by blending HNBR and silicone rubber which is not considered for commercial blending; blends of HNBR with silicone rubber tend to show immiscible due to dissimilar nature of silicone and HNBR, the possibility of phase separation cannot be ruled out, in unfilled system after vulcanisation leading to premature failure. Attempt has been made to improve compatibility and minimise the layer seperation by the use of compatibilizer. Both filled and unfilled systems, in presence and absence of compatibilizer have been studied. Improvement in tensile properties of the blends or are observed as compared to the non-blended rubber. Different ratios of HNBR and silicone rubber are represented in this study. Blends of HNBR with silicone rubber were immiscible system. The tensile strength increased with filler loading.

• The Journal of Korean Physical Therapy
• /
• 제20권4호
• /
• pp.1-6
• /
• 2008

Purpose: We studied the correlation between BBS (Berg Balance Scale), Functional Reach Test (FRT), Timed-Up & Go test (TUG), Stability Index (STI), MBI (Modified Barthel Index), and Fall History. Methods: We recruited 20 stroke patients from the Gang Dong Gu Health Care Center in Seoul, Korea. All subjects could walk with or without an assisting device. Subjects first completed a questionnaire pertaining to their fall history and Activity of Daily Living (MBI), and then were evaluated with BBS, TUG, FRT, and STI. We used the Tetrax posturography system that calculates a STI based on fluctuations in vertical ground reaction forces. The data were analyzed using a Pearson Correlation Coefficient. Results: The BBS and FRT (p<0.05) and MBI (p<0.01) showed a significant positive correlation. BBS negatively correlated with STI and TUG (p<0.01). Fall history and BBS, TUG, MBI, FR, STI did not correlate. Conclusion: The BBS helps predict weight shifting, walking, and ADL, but is not good for predicting fall risk. So, we need to study about factors that affect falling.

• Journal of Acupuncture Research
• /
• 제20권3호
• /
• pp.34-44
• /
• 2003

Objective : Bone homeostasis is maintained by balance of bone formation and resorption. Therefore, bone related diseases arose by disturbance of this balance between osteoblast and osteoclast activities. To develop a successful screening system the therapeutic components based on oriental medicine is essential to set up systematic approach for that purpose. The purpose of this study is to the know the gene expression using cDNA microarray assay. Methods : Cervi Pantotricuhum Cornu Herbal-acupuncture extract was prepared by boiling. human osteosarcoma cells(HOS) were treated with Cervi Pantotricuhum Cornu Herbal-acupuncture solution. Then mRNA was extracted and cDNA microarray assay was performed. Results : Human osteosarcoma cells(HOS) treated with Cervi Pantotricuhum Cornu Herbal-acupuncture solution($500{\mu}g/m{\ell}$) showed that thioredoxin, TAFII31 and two novel genes were increased. However many genes decreased their expression by Cervi Pantotricuhum Cornu Herbal-acupuncture. Conclusions : This type of approach will give a good chance to explore the favorable effects of Cervi Pantotricuhum Cornu Herbal-acupuncture. Further study is needed for investigating the effect of Cervi Pantotricuhum Cornu Herbal-acupuncture.

• 한국통신학회논문지
• /
• 제31권4C호
• /
• pp.318-323
• /
• 2006

본 논문에서는 주파수 도약 시스템에 사용될 짧은 길이의 도약 수열의 생성법 세가지를 제안한다. 우선, 기존에 알려져 있는 한개 일치수열과 다상 멱 잉여류 수열의 생성법에 대해 설명하고, 한개 일치수열의 변형으로 얻어진 생성법 하나와 다상 멱 잉여류 수열을 이용한 방법 두개를 제안한다. 다상 멱 잉여류 수열에서 '최적 지움위치'를 지운 수열이 제안된 세가지 수열들 중에서 가장 좋은 상관특성을 가지고, 그 다음은 첫번째 위치 지운 수열, 한개 일치 수열의 변형 수열 순으로 상관특성이 좋음을 확인한다. 또한 이들 세 수열이 심볼이 균형성이 우수하고 쉽게 구현될 수 있음을 설명한다.

• Journal of Acupuncture Research
• /
• 제18권5호
• /
• pp.135-146
• /
• 2001

Objective : Bone homeostasis is maintained by balance of bone formation and resorption. Therefore, bone related diseases arose by disturbance of this balance between osteoblast and osteoclast activities. To develop a successful screening system of the therapeutic components based on oriental medicine is essential to set out systematic approach for that purpose. Methods : This study was perforated Sprague-Dawley rat femur for bony defects(${\phi}5mm$) by the fissure bur. And experimetal group were treated with Cervi Pantotricuhum Cornu injection at both $Sh{\grave{e}}nsh{\tilde{u}}$(BL23) & $D{\grave{a}}zh{\grave{u}}(BL11)(0.2m{\ell})$. This was evaluated by radiography and histological analysis with in situ hybridization. Results : Cervi Pantotricuhum Cornu Herbal Acupuncture has weak effect on bony defect healing and this was evaluated by X-ray taking and histological analysis with in situ hybridization. Osteocalcin gene expression was not changed by Cervi Pantotricuhum Cornu Herbal Acupuncture in bony defects animal model. Conclusion : Taken together this study show that the Cervi Pantotricuhum Cornu herbal-acupuncture has a weak effect healing of bony defects, this type of approach might give a good chance to explore the favorable effects of Cervi Pantotricuhum Cornu herbal-acupuncture on bone tissue.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.576-588
• /
• 2014

The superiority of CMI (Cascaded Multilevel Inverter) is unparalleled in high power and high voltage STATCOM (Static Synchronous Compensator). However, the parameters and operating conditions of each individual power unit composing the cascaded STATCOM differ from unit to unit, causing unit voltage disequilibrium on the DC side. This phenomenon seriously impairs the operation performance of STATCOM, and thus maintaining the DC voltage balance and stability becomes critical for cascaded STATCOM. This paper analyzes the case of voltage disequilibrium, combines the operation characteristics of the cascaded STATCOM, and proposes a new DC voltage control scheme with the advantages of good control performance and stability. This hierarchical control method uses software to achieve the total active power control and also uses chopper controllers to enable that the imbalance power can flow among the capacitors in order to keep DC capacitor voltages balance. The operating principle of the chopper controllers is analyzed and the implementation is presented. The major advantages of the proposed control strategy are that the number of PI regulators has been decreased remarkably and accordingly the blindness of system design and debugging also reduces obviously. The simulation reveals that the proposed control scheme can achieve the satisfactory control goals.

• 대한예방한의학회지
• /
• 제10권1호
• /
• pp.33-51
• /
• 2006

With the reduction of contagious diseases throughout the world and prolonged life expectancy has lead into increase of habitual related diseases. Industrial development and better economic situation made people more concerned about their health. As primary illnesses are subdued in the past years, health care system and the public value prevention and well-being more than the treatment itself. Based on this trend, this study focused on the view of life from the perspective of Oriental medicine as it's peculiarities, regimen methods, and the definition of healthy life are evaluated. Following results were obtained: - View of life in Oriental medicine focused on two basic principles of interrelationship between the organs internally, inter-dependency with the natural environment and social surrounding externally as recognition and respect between the medium were valued. - Sustaining and maintaining good health in Oriental medicine are closely related to prenatally healthy pregnancy and fetation, as well as prenatal training. Postnatal maintenance includes accommodation to seasonal changes, adequate food intake, mind control, various regimen methods and avoidance of wrong doings. - Defining health includes body's internal condition and external influences, principles of essence, qi, spirit, and yin and yang, harmony and balance, and individuality. - To conclude, good health in Oriental medicine is defined as 'external adaptation to society and natural environment, and internal balancing of individual difference with accumulation of essence, nurturing and circulating qi, and every material around the body in harmony and balance."

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.585-589
• /
• 2004

This paper deals with the algorithm development that inspects defects such as Lens Focus, Black Defect, Dim Defect, Color Defect, White Balance, and Line Defect caused by the process of Compact Camera Module (CCM). These days the demand of CCM goes on increasing in various types like PDA, a cellular phone and PC camera every year. However, owing to the defect inspection of CCM by the semiskilled work the average inspection time of CCM takes about 40 to 50 seconds. As time goes by the efficiency takes a sudden turn for the worse because workers must inspect with seeing a monitor directly. In this paper, to solve these problems, we developed the imaging processing algorithm to inspect the defects in captured image of assembled CCM. The performances of the developed inspection system and its algorithm are tested on many samples. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.