• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.12-20
• /
• 2009

In this paper, we introduced the large signal model of a PIN diode and presented the measurement methods for each parameter of the large signal model. The elements of the PIN diode model are classified into the elements with a constant value and the elements depending on the junction voltage. We implemented the constant elements by lumped elements and the voltage-dependent elements by a SDD in ADS. The developed large signal model was successfully worked with various circuit simulations, such as simple DC, AC, S-parameter, Transient, and HB simulations. In order to verify the developed large signal model, we compared that the measured results of a limiter and a attenuator with the simulated results using the PIN diode model, which are in good agreement.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.43-48
• /
• 2016

3-Dimensional System in Package (3-D SiP) structure (Amkor calls it mPossum-molded Possum) using double side Surface Mount Technology (SMT) and double side molding was evaluated in order to achieve small/thin form factor as well as good functionality by integration and double side layout. As the new platform on laminate substrate basis, molding process was challenge in mold flow balance at top and bottom side and package warpage control over the overall assembly process. There were two types of different molding process evaluated with 1) 1-step molding which was done at both side at the same time and 2) 2-step molding which was done at the conventional molding process twice. Mold simulation helped to narrow down the material selections and parameters available before actual sample build. There were many challenges for this first trial in design/ parameter and material types but optimized them to enable this structure.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.2
• /
• pp.79-93
• /
• 2008

Objectives : Taichi for arthritis was developed in 1997 by Paul Lam, M.D. of family medicine in Australia. It is an exercise treatment program and a good approaching method of the oriental medicine for arthritis. However, clinical and academical researches were rare. The purpose of this study is to investigate the effectiveness of the Taichi for arthritis. Methods : We used the medical literature search system, MEDLIS and the database of academic journal, DBpia to search medical studies published in korea. Keywords were "Taichi", "Tai Chi Chuan" and "Arthritis". We classified literatures with two criteria, year of publishment and study design. Then we classified as placebo design and summarized whole material. We determined its effectiveness by positive-negative results of Taichi for arthritis. Results : Taichi for arthritis could release pain of the rheumatoid or degenerative arthritis. Also it is thought to increase muscular power and enhance physical flexibility, balance. Conclusions : There were limits to ensure effectiveness because of small number of studies comparing Taichi with other exercise program for arthritis. However the Taichi for arthritis could have positive effect to treat the rheumatoid and degenerative arthritis. We hope further studies to be followed in oriental medical field.

• Nuclear Engineering and Technology
• /
• v.22 no.1
• /
• pp.1-11
• /
• 1990

Heavy water is used as a moderator and a coolant in the pressurized heavy water reactor Because of the high cost of heavy water, downgraded heavy water generated in the reactor system is recycled to the reactor after being concentrated up to 99.8% or more in heavy water upgraders. This study investigates the process of upgraders and then suggests a theoretical model. The relations between process variables are derived from tower packing characteristics, vapour-liquid equilibria, and mass-heat balance equations at a steady state operation of the upgrader h computer program UPGR is developed, using the algorithm that solves the nonlinear equations step by step. It shows that the results of computer simulation are in good agreement with the operating data of the Wolsung upgrader. Thus, this computer code offers the optimum operating guide and is now applied to manage the performance of upgraders for the effective operation of the heavy water upgraders.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.2
• /
• pp.13-27
• /
• 2021

Stainless steel, which includes Ni and Cr with Fe balance, is most often applied for a wide range of applications such as structure and equipment material. It is not only suitable for use in these applications due to its good corrosion resistance, but also can be applied to catalyst, supporting material, and current collector due to intrinsic properties of Ni and Fe contained in stainless steel. Therefore, in recent years, a lots of surface treatment methods have been studied to activate stainless steel, developing application of water splitting system. In this review paper, the research on the surface treatment technology of stainless steel for water splitting is summarized. It is expected to be able to propose the diverse surface treatment approaches of stainless steel for application to low-cost and highly efficient water splitting electrode.

• Journal of the Korean Society of Radiology
• /
• v.81 no.1
• /
• pp.81-100
• /
• 2020

Magnetic resonance neurography (MRN) has been increasingly used in recent years for the assessment of peripheral neuropathies. Fat suppression T2-weighted imaging (T2WI) and diffusion-weighted imaging (DWI) have typically been used to provide high contrast MRN. Isotropic 3-dimensional (3D) sequences with fast spin echo, post-processing imaging techniques, and fast imaging methods, among others, allow good visualization of peripheral nerves that have a small diameter, complex anatomy, and oblique course within a reasonable scan time. However, there are still several issues when performing high contrast and high resolution MRN including standard sequence; fat saturation techniques; balance between resolution, field of view, and slice thickness; post-processing techniques; 2D vs. 3D image acquisition; different T2 contrasts between proximal and distal nerves; high T2 signal intensity of adjacent veins or joint fluid; geometric distortion; and appropriate p-values on DWI. The proper understanding of these issues will help novice radiologists evaluate peripheral neuropathies using MRN.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.43-49
• /
• 2013

The aim of this study was to compare both the performance of litters derived from two sire genetic origins (SGO), Vienna Blue (VB) and Burgundy Fawn (BF), along successive seasons of birth (SB; winter, spring, summer and autumn), and doe reproductive performance in an organic production system. A total of fifty-eight does consisting of a mixture of crosses of several medium-large size breeds at different parity order (P, 1 = nulliparous; 2 = primiparous; ${\geq}3$ = multiparous) and twelve males (6 VB and 6 BF) were housed indoors at environmental conditions that followed seasonality. An extensive reproductive rhythm was used and kits were weaned at $46{\pm}6$ d of age. Doe reproductive performance and the data of 105 litters (55 from VB and 50 from BF SGO) were recorded throughout the SB. No statistically significant differences related to SGO effect were observed. As regards parity order, multiparous does showed higher live weights (LW) (p<0.05), total born (p<0.01), total born alive (p<0.05) per delivery, and litter weight of born alive (p<0.05), but lower milk output at 21st d than primiparous does (p<0.05). The extensive reproductive rhythm mainly increased litter performance at birth in multiparous does but was not sufficient to permit a complete recovery of body reserves lost during lactation. Autumn SB negatively affected doe LW variation between deliveries. The number of pups born and born alive per delivery (p<0.05) and litter size at 21 d of age and at weaning (p<0.01) were lower during hot SB. Due to the lower litter size of pups born in summer and autumn, their individual weight at 21st d of age and daily individual growth rate 0 to 21 d were higher than those of pups born in winter (p<0.001). Litter performance at 21st d of age and individual pup pre-weaning growth rate were poorer for those born in spring than in other seasons due to the harmful effects of increased environmental temperatures. SB affected most of the performance traits of does and young rabbits reared under the organic farming system. The rabbits seemed better suited to organic rearing conditions during winter than in other seasons. The worst results overall were obtained in the spring SB, whereas the hot SB negatively affected both doe energy balance and prolificacy. In conclusion, the pups of the 2 SGO showed good pre-weaning performance and seemed suited to the organic rabbit production system.

• The Korean Society of Law and Medicine
• /
• v.14 no.2
• /
• pp.119-142
• /
• 2013

It is not easy to regulate the amount of radiation used for the medical purpose as there usually is more good than harm to the patient's health and life caused by the medical exposure to the radiation. However, the rapid increase of the use of diagnostic radiation involves a high possibility of increasing the radiation hazard exposure. Therefore, it is imperative to implement effective regulations in order to secure the safety of diagnostic radiation. The one and only rule we currently have for the diagnostic radiation is "Medicine Act" with only one clause dedicated to regulate the safety management that does not include any rules for the medical radiation. A set of inclusive rules for the whole medical radiation inclusive of diagnostic radiation and therapeutic radiation need to be based on the "Medicine Act" rather than "Nuclear Safety Act" in order to protect the medical professionals, patients and the guardians of patients from the hazards of diagnostic and/or therapeutic radiation that was not used the purpose of medical treatment. If there is an administrative measure to be imposed to secure the safety of diagnostic radiation, it is considered as exertion of governmental authority of administrative agency. There must be clear and realistic legal guidelines for in-fringe on people's interests. The administrative measures for the safety management of the diagnostic radiation must be clearly and specifically based on the law and the detailed standards for the administrative measures must be dele-gated by the presidential decree or departmental ordinance. Accordingly, the restrictions imposed by the administrative measures to the "Safety Inspection Institute of Radiation along with Radiation Exposure Measuring Institutes" should have clear legal basis as well and the detailed standards for the administrative measures should be regulated by the Ministry of Health and Welfare decree instead of the notification by the Director of Korean Centers for Disease Control and Prevention. While securing the safety of radiation on one side, careful review and up-grade on our legal system for the safety management of the diagnostic radiation is required on the other side to guarantee the legality, interest balance and reliability of the administrative measures.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.168-174
• /
• 2002

A new circulating hydroponic system was invented for oriental melons grown in the greenhouse. For developing nutrient solution management techniques, we examined the changes of nutrient contents of circulating solution in three different types of new hydroponic systems. The yield and fruit quality of oriental melons in Hydroponics were better than those in soil culture. The substrate culture was appropriate fer hydroponics of oriental melons, and NFT was turned to be the opposite due to the physiological disorder during hot seasons. Yamazaki's melon solution with EC 2.0dS.m$^{[-10]}$ was the most appropriate for oriental melons. The new circulating hydroponic system seemed to be appropriate for oriental melons because of the stable EC, pH and the macro- and micro-element contents. NO$_3$-N, Ca and Mg contents in the circulating solution kept a good balance in all types of hydroponics. However, p content, compared to other types, decreased by the degree of 1 me.L$^{[-10]}$ in perlite medium. K content showed irregular status in perlite but showed the stable status in cocopeat. Generally, microelements, except Mo, showed stable absorption in the substrate culture. However, in NET, most of the elements showed irregular absorption except B and Mn. Microelement absorption, especially Cu, Zn and Mo, decreased during hot seasons.

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.369-375
• /
• 2006

Calibration gas mixtures were prepared using dynamic volumetric method according to ISO 6145-5 and the uncertainty was evaluated. Ten identical capillaries with 0.25 mm in inner diameter and 50 cm in length were applied in this system. Dilution ratio of parent gas was determined by the number of capillaries that passes parent gas and that passes balance gas through. Capillaries were made of Teflon which had good chemical stability against adsorption of gaseous substances. Mechanical valves were introduced in this system in order to minimize the thermal effect of solenoid valves. Concentration of prepared gases were compared with master grade standard gases in cylinders made by RiGAS Co. and calibration of the instrument were completed using comparison method according to ISO 6143. Experimental results showed that the coefficient of variance of diluted oxygen standard gases showed less then 0.2% in most dilution range, that of diluted hydrogen sulfide standard gases showed less then 1.0%. Therefore, it is proven that the standard gases prepared by this system are appropriate to be used as a calibration standards in ambient monitoring, etc.