• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.227-233
• /
• 2010

This study analyzed performance according to kick point and stiffness of Soft-$golf^{TM}$ shaft. This research team developed soft-$golf^{TM}$ as a new fusion sports with similar motions with golf and it can be learned safely for all age groups in 2002. The head of Soft-$golf^{TM}$ club is made of zinc alloy and has a mesh or a grid structure, and shaft uses carbon graphite to reduce the total weight of the club. To improve carry distance and to assure consistency of a ball during Soft-$golf^{TM}$ swing, this study manufactured shaft with various kick points (low, middle and high) and stiffness (stiff, regular, lady, morelady) and analyzed a swing motion with characteristics of each shaft presented in a dynamic condition such as a ball's speed, a head's torsion angle and a ball's deviation with ProAnalyst program through a high-speed camera taking pictures using a swing machine robot system(Robo-7). From all of the results, this study determined an appropriate shaft of Soft-$golf^{TM}$.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.1
• /
• pp.75-82
• /
• 2012

The purpose of this study was to suggest the proper shaft and head fitting methods of the golf club to increase the flight distance of the golf ball. Rotations per minute of the golf ball(RPM), ratio of Ball speed to club head speed(T-Ratio) and launch angle right after impact(LA), which are directly related to ball flight distance, were measured using Spectra with shutter speed of 1/1000sec at the constant head speed of 95mph which was controlled by robot golf swing machine. In order to investigate the effect of club shaft to the 3 selected variables, 10 shafts were used to make ten test clubs with one controlled club head which is the most commonly used by golf players. To measure the effect of the club head to the 3 selected variables, 6 golf club heads which are most commonly used by golfers were selected to make 6 test clubs with a controlled shaft which is one of the best known by players. The shafts and the heads were identified by statistical analysis to increase or decrease the RPM, T-ratio and LA. A proper fitting method of the selected shafts and the club head was suggested to increase the ball flight distance in golf.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.44-47
• /
• 2002

A liner static and dynamic analysis for a golf shaft, which is made of carbon fiber reinforced composite materials, is presented in this study. Major mechanical parameters of golf shafts such as deflection, torsional angel, frequency of vibration(CPM), and kick point are analyzed by finite element method. The effects of major parameters on the performance of golf shafts are also discussed. The results show that the major parameters of golf shafts are strongly dependent on the material properties of fibers and design pattern of golf shafts. The present results will be useful to design sheet-rolled golf shafts.

• Composites Research
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2007

This study presents a methodology for optimization of static characteristics of golf club shafts. Stacking sequence for the optimal composite shaft performance is searched. A new objective function is defined for the simultaneous optimization of flexural and torsional stiffnesses. Classical lamination theory is used for the static analysis. As the optimization tool, genetic algorithm is applied with the stacking sequence as design. variables. With the optimal stacking sequence, dynamic characteristics of the shaft is also studied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.2028-2031
• /
• 2005

This paper concerns stress distribution of the soft golf clubs using FEM. The identification of the stress distribution of the soft golf clubs used the finite element method using ABAQUS. The soft golf clubs which were designated is a new golf clubs to keep a good health for the elderly. To design the soft golf clubs, we concerns two main purpose ; First, our efforts concentrate to reduce the weight of the soft golf clubs. We considers the change of material and geometry of the golf club‘s head and shaft. Second, it is to increase the size and shape of 'sweet spot' of the soft golf club’s head face. To accomplish this purpose, we made the various type of the soft golf club's head. In this paper, we simulates putter models of the soft golf clubs. The pre-processing which generates the mesh of the model used HyperMesh with geometry data by CATIA ver 5.0 This paper compares the stress distribution of putter type which was loaded.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.273-283
• /
• 2018

The purpose of this study is to analyze the optimum driver selection according to shaft intensity, shaft length and shaft weight that are determining factors of driver shot. To achieve the above purpose, the subject were participate with handicap zero 10 male pro golfer and mean score 90(handicap about 18) amateur 10 male golfer. The used club limited number 1 driver, we tested 24 driver which is shaft intensity, length, weight, total weight and swing weight. Dependent variable was strike ball speed, flying distance and head speed. The findings can be summarized as follows. First, There is a significantly difference in CPM. Ball speed, head speed and flying distance according to driver shaft intensity were found to be the best when CPM is 230<. Second, There is a significantly difference in shaft length. Ball speed, and head speed according to driver shaft length were found to be the best at 46 inch and flying distance were found to be the best at 45 inch. Third, There is not significantly difference in SW. Ball speed and flying distance according to driver shaft weight were found to be the best with 65g. In the case of head speed, it was the fastest with 50g shaft. Four, total variables were significantly difference between in pro and amateur golfer. In conclusion, there would be differences in individual physical condition but the best result was found with a driver of CPM 230<, shaft length 46inch, and shaft weight 65g.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.217-225
• /
• 2019

The aim of this study was determine to effect of shaft length and physical condition on golf driving performance(head speed, distance and direction). A range of drivers with length between 44 inch, 45 inch and 46 inch limit imposed by R&A rules limited were assembled and evaluated. Club head speed and drive distance and accuracy were determined three category 27 PGA pro golfer (handicaps 0, and height $170cm{\geq}171-175{\geq}175-180cm$) who golf performance. As a results follow : Head speed was significantly difference with 44, 45 between 46inch(p<.01). Distance was significantly difference with 44 between 46inch(p<.05). And direction was significantly difference with 44, 45inch between 46inch(p<.05). Head speed according to height was general similarity among shaft length in 170cm, 171-175cm. Distance were general similarity among shaft length in 170cm, and significantly difference with 44inch between 46inch in 171-175cm(p<.01), and significantly difference with 45inch between 46inch in 176-180cm(p<.05). Direction were significantly difference with 44inch between 46inch in 170cm(p<.05), but do not significantly difference with 44inch between 46inch in 176-180cm, 176-180cm. These results show that shaft length and height can affect head speed, distance and direction.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.59-66
• /
• 2009

The purpose of this study was to evaluate flatness of swing plane and determine swing plane type using 3-D swing plane analysis from young elite male golf players. This study also investigate the possibility of determination of swing plane using other kinematic parameters except flatness. As results, no correlations was found between flatness and handicap. Comparison of flatness between single plane and multiple plane swing group were performed and found a significant difference. The error range of flatness, 10cm, which was used for distinguish swing plane type was effective since significant differences were found at MB, EB, and EF. These differences were typical characteristics to classify two swing styles. Other kinematic parameters such as unit vector components of shaft and displacement of shaft end point also compared per event but found no significant differences. However, the moving patterns of these parameters during a golf swing showed such characteristics of each swing plane type well that these parameters could be used to determine swing style as an indirect barometers.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.181-189
• /
• 2005

To know the proper impact posture and changes for the various clubs, changes of impact variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed video cameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. Major findings of this study were as follows. 1. Lateral position of the head remained more right side of the target up to 3.5cm compared to the setup as the length of the club increased. 2. Left shoulder raised up to 5cm and right shoulder lowered up to 2.5cm compared to setup. The shoulder line opened slightly (maximum 11 degrees) to the target line. 3. Forward lean angle of the trunk decreased up to 4 degrees (more erected) compared to setup. 4. Side lean angle of the trunk increased compared to setup and increased up to 16 degrees as the club length increased. 5. The pelvis moved to the target line direction horizontally and opened up to 31 degrees. Right hip moves laterally to the grip position at the setup. 6. Flexion of the left leg maintained almost constantly but the right leg flexed up to 11 degrees compared to setup. 7. Left arm is straightened but the right arm flexed about 20degrees compared to straight. 8. Center of the shoulders were in front of the knees and toes of the feet. 9. Hands moved to the left (8.7cm), forward (5.7cm) and upward (11.6cm) compared to the setup. This is because of the rotation of pelvis and shoulders. 10. Shaft angle to the ground was smaller than the lie angle of the clubs but it increased close to the lie of the clubs at impact.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.17-32
• /
• 2002

The purpose of this study was to find the rational method to analyze golf swing with specific property of club shaft. Three subjects were filmed by two high speed digital cameras with 500 fps. The phase analyzed was downswing of each subject. The three-dimensional coordinates of the anatomical landmarks were obtained with motion analysis system Kwon3d 3.0 version and smoothed by lowpass digital filter with cutoff frequency 6Hz. From these data, kinematic and kinetic variables were calculated using Matlab(ver 5.0) The variables for this study were angular velocity and accelerations, which were calculated and following conclusions have been made : 1) Golf swing time of stiff club is faster than that of regular club. 2) In shoulder joint motion of swing with the stiff club, x-stiff showed mort rapid negative acceleration than that of regular club. 3) In regular club, the velocity of club head would be more effective velocity, which was increasing, than those of other clubs before impact. 4) In wrist joint motion of swing with stiff club, x-stiff club showed faster than regular club in the downswing and impact more rapid negative acceleration.