• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.29-37
• /
• 2020

In the past, meta-heuristic optimization algorithms were developed to solve the problems caused by complex nonlinearities occurring in natural phenomena, and various studies have been conducted to examine the applicability of the developed algorithms. The self-adaptive vision correction algorithm (SAVCA) showed excellent performance in mathematics problems, but it did not apply to complex engineering problems. Therefore, it is necessary to review the application process of the SAVCA. The SAVCA, which was recently developed and showed excellent performance, was applied to the advanced Muskingum flood routing model (ANLMM-L) to examine the application and application process. First, initial solutions were generated by the SAVCA, and the fitness was then calculated by ANLMM-L. The new value selected by a local and global search was put into the SAVCA. A new solution was generated, and ANLMM-L was applied again to calculate the fitness. The final calculation was conducted by comparing and improving the results of the new solution and existing solutions. The sum of squares (SSQ) was used to calculate the error between the observed and calculated runoff, and the applied results were compared with the current models. SAVCA, which showed excellent performance in the Muskingum flood routing model, is expected to show excellent performance in a range of engineering problems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1329-1335
• /
• 2011

On the basis of detailed 3D finite-element (FE) limit analyses, the plastic limit load solutions for pipes with slanted circumferential through-wall cracks (TWCs) subjected to axial tension, global bending, and internal pressure are reported. The FE model and analysis procedure employed in the present numerical study were validated by comparing the present FE results with existing solutions for plastic limit loads of pipes with idealized TWCs. For the quantification of the effect of slanted crack on plastic limit load, slant correction factors for calculating the plastic limit loads of pipes with slanted TWCs from pipes with idealized TWCs are newly proposed from extensive 3D FE calculations. These slant-correction factors are presented in tabulated form for practical ranges of geometry and for each set of loading conditions.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.312-320
• /
• 2009

Stable cell preservation is an essential factor in the regenerative medicine for cell therapies and transplantation of biologic materials. In this study, we studied to provide more stable hypothermic preservation by protection of cell damage during the preservation at $4^{\circ}C$. The result of searching for key components that have excellent efficacy in hypothermic preservation of cells, we have identified the fact that the hypothermic preservation adding protein hydrolysates such as yeast hydrolysate is far superior to others. All protein hydrolysates that are derived from animal, plant and microbe sources have superior efficacy, especially the peptides which have molecular weights under 10 kDa have the best efficacy among the components of protein hydrolysate. The protein hydrolysates prevented the decrease of ATP level in the cells caused by hypothermic environment and they inhibited the generation of ROS. Adding antioxidants and control agents of osmotic pressure were showed to have more superior efficacy in hypothermic preservation. Finally, KUL261 solution (DMEM/F12 1 : 1 medium, yeastolate 1%, $\alpha$-tocopherol $100{\mu}M$, dextran 2.5%), the preservation solution developed in this study, showed the best efficacy in both cell viability and cell growth more than other conventional preservation solutions. In conclusion, the improved hypothermic preservation solution that contains the protein hydrolysates as a key component provide the best preservation efficacy. It provides better efficacy than other preservation solutions and will contribute to both the development of regenerative medicine and global commercialization in this therapeutic field.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.419-425
• /
• 2014

The current work investigated the variation of numerical solutions according to the grid number, the distance of the first grid point off the ship surface, turbulence modeling and discretization. The subject vessel is KVLCC. A commercial code, Gridgen V15 and FLUENT were used the generation of the ship hull surface and spatial system and flow computation. The first part of examination, the effect of solutions were accessed depending on the grid number, turbulence modeling and discretization. The second part was focus on the suitable selection of the distance of the first grid point off the ship surface: $Y_P+$. When grid number and discretization were fixed the same value, the friction resistance showed differences within 1 % but the pressure resistance showed big differences 9 % depending on the turbulence modeling. When $Y_P+$ were set 30 and 50 for the same discretization, friction resistance showed almost same results within 1 % according to the turbulence modeling. However, when $Y_P+$ were fixed 100, friction resistance showed more differences of 3 % compared to $Y_P+$ of 30 and 50. Whereas pressure resistance showed big differences of 10 % regardless of turbulence modeling. When turbulence modeling and discretization were set the same value, friction, pressure and total resistance showed almost same result within 0.3 % depending on the grid number. Lastly, When turbulence modeling and discretization were fixed the same value, the friction resistance showed differences within 5~8 % but the pressure resistance showed small differences depending on the $Y_P+$.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.4
• /
• pp.131-141
• /
• 2014

Over the last decade, the Global Navigation Satellite System (GNSS) has been increasingly utilized as a meteorological research tool. The Korea Astronomy and Space Science Institute (KASI) has also been developing a near real-time GNSS precipitable water vapor (PWV) information management system that can produce a precise PWV for the Korean Peninsula region using GNSS data processing and meteorological measurements. The goal of this paper is to evaluate whether the precise point positioning (PPP) strategy will be used as the new data processing strategy of the GNSS-PWV information management system. For this purpose, quality assessment has been performed by means of a comparative analysis of the troposphere zenith total delay (ZTD) estimates from KASI PPP solutions (KPS), KASI network solutions (KNS), and International GNSS Service (IGS) final troposphere products (IFTP) for ten permanent GNSS stations in the Korean Peninsula. The assessment consists largely of two steps: First, the troposphere ZTD of the KNS are compared to those of the IFTP for only DAEJ and SUWN, in which the IFTP are used as the reference. Second, the KPS are compared to the KNS for all ten GNSS stations. In this step, the KNS are used as a new reference rather than the IFTP, because it was proved in the previous step that the KNS can be a suitable reference. As a result, it was found that the ZTD values from both the KPS and the KNS followed the same overall pattern, with an RMS of 5.36 mm. When the average RMS was converted into an error of GNSS-PWV by considering the typical ratio of zenith wet delay and PWV, the GNSS-PWV error met the requirement for PWV accuracy in this application. Therefore, the PPP strategy can be used as a new data processing strategy in the near real-time GNSS-PWV information management system.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.133-141
• /
• 2016

Although construction of any new nuclear power projects had not been launched since mid-1970s until recently in the USA, many new nuclear power plants have been constructed in many countries with the support of their governments mainly as part of their national energy security and electric source diversification policies. For many reasons, the nuclear power industry seemed to reclaim their renaissance from the beginning of this century and the investment in the nuclear power projects draw positive concern from the private financial sector. But the global financial crisis in 2008 and subsequent economic slow-down together with tighter bank credit regulations caused commercial banks, the main source of financing, to lose appetite for investing in new nuclear power projects. But the nuclear power economics shows that the nuclear power is viable in terms of the environmental benefit and long-term average cost compared to other power generation sources. Also doubt about nuclear power safety was much mitigated due to technology development and reinforced safety-related tests and monitoring. Therefore, the prospect for nuclear power market expansion remains positive although there are comparatively big differences among different scenarios. After Korea Electric Power Corp. won the UAE nuclear power project in December of 2009, the competition in nuclear power markets is undergoing huge changes. Competitors backed by the support of their own governments are now entering the market with many aggressive and innovative financing packages to win bids of new nuclear power projects. This report analyzed the nuclear power market prospects, competitive edges of nuclear power, risk management measures, and financing challenges and recommends alternative solutions to promote competitive edges in winning bids of new nuclear power projects.

• Journal of Legislation Research
• /
• no.53
• /
• pp.213-267
• /
• 2017

Regulatory barrier is considered most challenging out of all FinTech barriers, which many technology innovators have always experienced. Even though technological solutions promise customers accessibility to more cost-effective and secured financial services, it is quite challenging to create regulatory environment that enables innovation FinTech industry. Especially, a common challenge FinTech innovators and business face is regulatory uncertainty and confusion rather than any particular regulation. Since many FinTech models are continuously introducing new innovative ways in providing financial services, significant confusion could be raised in applying principles of existing law and regulations. In addition, it is uncertain whether or not applying complex regulatory compliance model intended for large financial institutions to small start-ups is appropriate since most existing regulations and rules are established and introduced without considering innovative tools such as mobile instruments, e-trade, and internet. Therefore, new mechanism to access to regulatory information in a more cost-effective, quick and immediate way should be created. Regulators, technological innovators, and financial customers should cooperate each other to find out appropriate solutions for those issues. Many regulators are introducing regulatory sandbox which provides service providers with opportunities to test their innovations, during the test, providing regulators with enough time to understand risks of innovations. However, regulatory sandbox is not a panacea for all challenges to FinTech innovations. Therefore, regulators should make comprehensive and multidimensional efforts including regulatory sandbox in supporting FinTech ecosystem.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.67-80
• /
• 2022

Smart City Technology, which is significant in the era of the 4th industrial revolution, greatly increases the efficiency and productivity of cities nowadays. The purpose of this study is to present a strategic approach for industrial revitalization and overseas export by analyzing the current status of smart city-related companies and discovering high-priority smart city technologies. To this end, the smart city theory and ASEAN smart city were reviewed through prior research, and a survey of companies with domestic smart city technology was conducted. As a result of the survey, it is revealed that companies with smart city technology in Korea are highly willing to export to ASEAN countries. There is a strong desire to export the following technologies: construction, traffic, green·energy, etc. And there was a high willingness to export the following services: IoT, platform, AI, etc. The following solutions have been proposed as solutions to Strategic Plans to Promote the Export: 1) Deregulation and incentives, 2) Global human resource development, 3) Information provision and strengthening of local networks, 4) Financial and public relations support.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.106-113
• /
• 2019

In order to respond to the global environmental issues, developed countries have been helped the developing countries as the Official Development Assistance (ODA). It is important to understand technology needs of the developing countries to provide the optimum solutions. In this study, the information of the environmental R&D dealing with appropriate technology were comprehensively collected based on the conducted R&D projects from the ministry of environment in Korea. The technology needs by UNFCCC (United Nations Framework Convention on Climate Change) and Korean government were analyzed named as TNA and CPS according to the target developing countries. In South-East Asia and Africa region, there were technology needs on water, biota, air, solid wastes, infrastructures and resources. And they were related to the issues such as environmental pollution, construction, climate change, biodiversity, energy and water management. The technology needs by UNFCCC and Korean government were also compared. Furthermore, the environmental R&D on appropriate technology should be focused on localization and maintenance to provide sustainable solutions to the developing countries.

• Information Systems Review
• /
• v.10 no.3
• /
• pp.207-222
• /
• 2008

In recent business environment, we realize that MIS is taking important role in which it has been involved. However, we are having difficulty to find out the identity of MIS in business studies since MIS is derived from Micro Economics, Operations Research, Computer Science and so on. And there is no clear boundary in order to classify with other business area in consisting curriculums. Furthermore, IT staffs in the field are facing difficulties to utilize what they have learned MIS curriculums provided from business studies. In this research, we would like to present implications for development of market oriented MIS curriculums, which can be the actual needs of IT fields, through analysis of System Integration project for recent three years, analysis of IT capability based on the survey of IT consultants and analysis of application S/W technology trend in global vendor referred to "MIS Curriculum: The Current State of the Art and a Proposed Future Model (Lee et al, 2007)". As enterprise application software technology develop, the system integration can be achieved through special system solutions such as ERP, CRM, SCM, BI, etc. We also have acknowledged that solution consultants who have the ability of packaged S/W application are in demand since S/W vendors have become larger and more practical through M&A. Therefore, we have come to a conclusion regarding new direction of curriculum for increasing human power in IT industry which we demonstrated in detail through this research.