• 지구물리와물리탐사
• /
• 제6권2호
• /
• pp.77-86
• /
• 2003

자유면 경계조건을 정착하게 묘사할 수 있는 변위근사 유한차분법을 이용하는 시간영역 탄성파 모델링법을 고안하였다. 기존의 변위근사 유한차분법의 경우 변위와 매질의 물성을 격자점에 정의하는 격자군(격자점 기반의 격자군)을 이용하였으나, 이 연구에서 제시하는 새로운 유한차분법에서는 변위는 격자점에 정의하지만 매질의 물성을 격자점으로 둘러싸인 면에 정의하는 격자군(셀 기반의 격자군)을 이용한다. 매질의 물성을 셀에 정의할 경우 자유면에서 응력이 사라진다는 자유면 경계조건을 추가로 적용할 필요가 없으며 매질의 물성 변화만으로 자유면 경계조건을 표현할 수 있다. 수치예를 통한 정확도 분석 결과 셀 기반의 격자군을 이용할 경우 계산된 수치석인 해가 해석적인 해에 매우 근사함을 알 수 있었다.

• 한국전산구조공학회논문집
• /
• 제21권1호
• /
• pp.21-34
• /
• 2008

이 논문에서는 철근콘크리트 프레임 구조물을 대상으로 직접탐색기법을 도입하여 보다 개선된 유전자 알고리즘을 이용한 최적설계 기법을 제안하고 있다. 먼저 유전자 알고리즘을 이용하여 다양한 초기 가정 단면을 발생시키고, 이로부터 도출되는 각 설계 부재력 조건에 대해 미리 구성한 설계 단면 데이터베이스(DB)를 기반으로 회귀분석과 직접탐색을 이용하여 최적해를 도출한 후 여러 세대에 걸쳐 누적된 결과로부터 전역 최적해(global minimum)를 선택하였다. 제안된 알고리즘은 일반적인 유전자 알고리즘만을 이용할 경우 전역 최적해에 도달하기까지 수렴성이 떨어져서 그 결과 해의 적합도(Fitness)가 저하되는 단점을 보완하여 빠른 수렴성과 함께 최종해의 경제성에서도 향상된 결과를 보인다. 또한, 작용 하중 조건 하에서 전 부재가 최대의 효율로 저항함으로써 보다 경제적인 설계가 되도록 하기 위하여 비선형 해석을 수행하여 도출된 부재력을 바탕으로 설계 단면을 결정하였으며, 제안된 알고리즘을 예제 구조물에 적용하여 그 효율성을 검증하였다.

• 융합신호처리학회논문지
• /
• 제9권2호
• /
• pp.129-134
• /
• 2008

본 논문에서는 적자생존 원리에 기반한 유전자 알고리즘을 이용하여 일차원 비선형 광자 결정 구조에 대해 분석하고, 광 트랜지스터로의 적용 가능성을 컴퓨터 시뮬레이션에 의해 증명한다. 이와 같은 형태의 최적 설계는 해석식이 필요한 steepest decent 최적 알고리즘과 달리 유전자 알고리즘은 탁월한 성능을 낼 수 있으며, 광 트랜지스터 뿐만 아니라 다른 광자 결정 광소자의 설계에 유용하게 적용될 수 있다. 또한, global minimum 최적해 부근에서 여러 가지의 해가 얻어지기 때문에 광 트랜지스터가 어떤 모양을 가져야 되는지 분석하는데 많은 도움을 주는 장점을 갖는다. 완전 광 필터 트랜지스터를 설계하기 위해 신경회로망 모델을 이용하여 초기 설계를 수행한 후, 유전자 알고리즘에 의해 최종적인 최적화 설계가 수행된다. 시뮬레이션으로부터 얻어진 일차원 광자 결정 트랜지스터의 스위칭 On/Off 비는 약 27dB 였다.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1529-1539
• /
• 2000

A newly developed optimization method which uses the genetic algorithm combined with the sensitivity analysis is presented in this paper. The genetic algorithm is a probabilistic method, searching the optimum at several points simultaneously, requiring only the values of the object and constraint functions. It has therefore more chances to find global solution and can be applied various problems. Nevertheless, it has such shortcomings that even it approaches the optimum rapidly in the early stage, it slows down afterward and it can't consider the constraints explicitly. It is only because it can't search the local area near the current points. The traditional method, on the other hand, using sensitivity analysis is of great advantage in searching the near optimum. Thus the combination of the two techniques makes use of the individual advantages, that is, the superiority both in global searching by the genetic algorithm and in local searching by the sensitivity analysis. Application of the method to the several test functions verifies that the method suggested is very efficient and powerful to find the global solutions, and that the constraints can be considered properly.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.989-994
• /
• 2009

We at Mitsubishi have lined up Gen-III+ solutions for a wide variety of global customers: ATMEA1 of the 1100MWe class, and an APWR with the largest capacity of 1700MWe. In this paper, we would like to introduce the APWR. With an increased requirement for nuclear power generation as an effective countermeasure against global warming, we have established the APWR plant, a large-capacity Mitsubishi standard reactor combining our accumulated experience and technology as an integrated PWR plant supplier. The APWR plant has achieved high reliability, safety and enhanced economy based on a technology that has been developed with the support of the government and utilities through improvement and standardization programs of light water reactors. Currently, Tsuruga Units 3 and 4, the first two APWRs, are undergoing licensing, while we are making efforts to obtain the standard design certification (DC) of US-APWR and preparing for the European Utility Requirements (EUR) compliance assessment of EU-APWR. Mitsubishi Heavy Industries, Ltd. (MHI) positions the APWR as a core technology that will contribute to the prevention of global warming and meet worldwide requirements.

• 한국정보시스템학회지:정보시스템연구
• /
• 제6권2호
• /
• pp.85-105
• /
• 1997

The objective of this research is to construct and build a software platform to enable collaboration among enterprise headquarters, product designers, software engineers, manufacturing plants, and suppliers which are locate at different remote locations via internet. In specific, agent technology is adopted as a software vehicle to automate demand and supply process in the internet environment. Agents are programs that act on behalf of their human users to perform laborious tasks such as information locating, accessing, filtering, integrating, adapting and resolving inconsistencies. Global competion is forcing the present day industry to produce high quality product more fast and inexpensively. In Korea, most labor-intensive industries have moved to China and other Asian countries for cost reduction. The need for fast information exchange has increased among the remote locations for the cooperation and coordination. In this research, a virtual global purchasing and ordering system will be constructured that distributes production schedule among remote places, acts as a bridge between the headquarters and manufacturing plants, distributes tasks and collates different solutions between demand and supply using agent. The external communication protocol takes HTML format, internal message handling requires SGML for document exchange, and KQML for agent implementation. The expected benefits will be : reduced cost of real-time information exchange, realization of global manufacturing environment, the maximum utilization of internet for the enterprise data exchange.

• Structural Engineering and Mechanics
• /
• 제56권2호
• /
• pp.241-256
• /
• 2015

Channel girder bridges that consist of a deck slab and two side beams are good choices for railway bridges and urban rail transit bridges when the vertical clearance beneath the bridge is restricted. In this study, the behavior of simply supported channel girder bridges was theoretical studied based on the theory of elasticity. The accuracy of the theoretical solutions was verified by the finite element analysis. The global bending of the channel girder and the local bending of the deck slab are two contributors to the deformations and stresses of the channel girder. Because of the shear lag effect, the maximum deflection due to the global bending could be amplified by 1.0 to 1.2 times, and the effective width of the deck slab for determining the global bending stresses can be as small as 0.7 of the actual width depending on the width-to-span ratio of the channel girder. The maximum deflection and transversal stress due to the local bending are obtained at the girder ends. For the channel girders with open section side beams, the side beam twist has a negligible effect on the deflections and stresses of the channel girder. Simplified equations were also developed for calculating the maximum deformations and stresses.

• 충청수학회지
• /
• 제37권1호
• /
• pp.27-40
• /
• 2024

In this paper, we consider the higher-order HartreeFock equations. The higher-order linear Schrödinger equation was introduced in [5] as the formal finite Taylor expansion of the pseudorelativistic linear Schrödinger equation. In [13], the authors established global-in-time Strichartz estimates for the linear higher-order equations which hold uniformly in the speed of light c ≥ 1 and as their applications they proved the convergence of higher-order Hartree-Fock equations to the corresponding pseudo-relativistic equation on arbitrary time interval as c goes to infinity when the Taylor expansion order is odd. To achieve this, they not only showed the existence of solutions in L² space but also proved that the solutions stay bounded uniformly in c. We address the remaining question on the convergence of higherorder Hartree-Fock equations when the Taylor expansion order is even. The distinguished feature from the odd case is that the group velocity of phase function would be vanishing when the size of frequency is comparable to c. Owing to this property, the kinetic energy of solutions is not coercive and only weaker Strichartz estimates compared to the odd case were obtained in [13]. Thus, we only manage to establish the existence of local solutions in H^s space for s > $\frac{1}{3}$ on a finite time interval [-T, T], however, the time interval does not depend on c and the solutions are bounded uniformly in c. In addition, we provide the convergence result of higher-order Hartree-Fock equations to the pseudo-relativistic equation with the same convergence rate as the odd case, which holds on [-T, T].

• 상하수도학회지
• /
• 제30권4호
• /
• pp.401-408
• /
• 2016

Desalination is getting more attention as an alternative to solve a global water shortage problem in the future. Especially, a desalination technology is being expected as a new growth engine of Korea's overseas plant business besides one of the solutions of domestic water shortage problem. In the past, a thermal evaporation technology was a predominant method in desalination market, but more than 75% of the current market is hold by a membrane-based reverse osmosis technology because of its lower energy consumption rate for desalination. In the future, it is expected to have more energy efficient desalination process. Accordingly, various processes are being developed to further enhance the desalination energy efficiency. One of the promising technologies is a desalination process combined with Pressure Retarded Osmosis (PRO) process. The PRO technology is able to generate energy by using osmotic pressure of seawater or desalination brine. And the other benefits are that it has no emission of $CO_2$ and the limited impact of external environmental factors. However, it is not commercialized yet because a high-performance PRO membrane and module, and a PRO system optimization technology is not sufficiently developed. In this paper, the recent research direction and progress of the SWRO-PRO hybrid desalination was discussed regarding a PRO membrane and module, an energy recovery system, pre-treatment and system optimization technologies, and so on.

• 무역상무연구
• /
• 제14권
• /
• pp.177-218
• /
• 2000

Global Electronic Trading means that trading partners trade each other via Global Electronic Trading Network, that is, global business to business electronic commerce. Recently, where the cargo arrives ahead of the B/L, the importer cannot take delivery of the cargo without the B/L. This situation is referred to as the B/L dilemma. But the BOLERO system will resolve this B/L dilemma. Bolero Project is developing a cross industry utility platform for the secure, electronic transfer of commercial trade information world wide. After the successful testing of an original pilot project, The Bolero Association was formed in 1995 by a group of interested cross industry companies. As a joint venture between SWIFT and TT Club, bolero.net is changing the way the world trades by providing a web-based, paperless mode of commerce that is designed to become a global standard. Bolero International Limited published the first edition of Bolero Rulebook in 1999. The Bolero Rulebook as amended from time to time, governing the relationship between Users and their rights and obligations arising from the Bolero system. The Bolero service will be governed by a multilateral contract called the Bolero Rule Book which specifies the rights and responsibilities of Bolero and its users. The Title Registry and Bolero Bill of Lading provide a fully functional equivalent to the paper bill of lading. The Bolero Bill of Lading can be created, transferred, amended, and surrendered by way of designating to order party, blank endorsement, refusal by the transferee etc. Thus, this study deals with the functions of Bolero Bill of Lading and the problems and solutions in the Bolero Bill of Lading in point of definitions and operation under the Bolero Rulebook.