• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.202-207
• /
• 2016

Estimation of vertical position is critical in applications of sports science and fall detection and also controls of unmanned aerial vehicles and motor boats. Due to low accuracy of GPS(global positioning system) in the vertical direction, the integration of IMU(inertial measurement unit) with the GPS is not suitable for the vertical position estimation. This paper investigates an IMU-barometer integration for estimation of vertical position (as well as vertical velocity). In particular, a new two-step Kalman/complementary filter is proposed for accurate and efficient estimation using 6-axis IMU and barometer signals. The two-step filter is composed of (i) a Kalman filter that estimates vertical acceleration via tilt orientation of the sensor using the IMU signals and (ii) a complementary filter that estimates vertical position using the barometer signal and the vertical acceleration from the first step. The estimation performance was evaluated against a reference optical motion capture system. In the experimental results, the averaged estimation error of the proposed method was 19.7 cm while that of the raw barometer signal was 43.4 cm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.180-187
• /
• 2010

In this paper, a GNSS-based AGV system was designed, and steering tested on a golf cart using electric wires in order to confirm the control efficiency of the low speed vehicle which used only position information of GNSS. After analyzed the existing AGVs system, we developed controller and steering algorithm using GNSS based position information. To analyze the performance of the developed controller and steering algorithm, straight-type and circle-type trajectory test are executed. The results show that steering performance of GNSS-based AGV system is ${\pm}\;0.2m$ for a reference trajectory.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.355-356
• /
• 2007

21세기는 한국 철도의 르네상스시대라고 부르고 있다. 이는 자동차와 비행기 등 다른 교통수단에 의해 낙후되어있던 철도가 다시 안전하면서도 정확한 운송시간 등으로 그 경쟁력을 확보해가고 있으며 때를 같이하여 고속철도의 개통을 앞두고 있기 때문이다. 이러한 철도의 경쟁력을 강화하는데 크게 기여한 부분 중 하나가 신호 보안장치 즉 열차제어장치의 발전에 있다고 하겠다. 하지만 열차를 제어하기 위해선 실시간격으로 열차의 절대 위치를 알아야만 하는 문제점이 있다. 이를 비교적 쉽게 극복할 수 있는 방법 중 하나가 인공위성을 이용한 통신기술을 이용하는 것이다. 이는 이미 다른 분야에서는 상용화되어 서비스가 이루어지고 있는 GPS(Global Positioning System)이다. 본 논문에서는 열차의 절대 위치를 GPS(Global position system)를 이용하여 구해 보고자 한다. 이를 위해 GPS 신호 추적을 확장형 칼만 필터를 적용하여 열차의 속도 변화에 대한 GPS 신호 추적 루프를 예측 제어함으로써 보다 정확하고 빠른 GPS 위치 정보를 도출하였다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.1
• /
• pp.19-26
• /
• 2010

To expand the application area of global navigation satellite systems, precision landing is one of the most critical area to be solved. For the development and validation of the precision landing system, many aspects need to be analyzed including the system architecture, signal characteristics, atmospheric delay, communication delay, accuracy, integrity, and availability. Among them, the signal characteristics analysis requires the processing of measurements collected by real-flight experiments. This paper presents the processing results of the real measurements collected by a flight and landing experiment. To process and analyze the data, double differencing position-domain hatch filter is utilized. Accuracy of the proposed filter is evaluated utilizing reference trajectory generated by commercial software. Finally, by comparing with conventional range domain characteristics of position domain filter is analyzed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.4
• /
• pp.379-384
• /
• 2013

We propose a new global positioning method for the indoor mobile robots. The multiple indoor lights fixed in ceiling are used as the landmarks of positioning system. The ceiling images are acquired by the fisheye lens camera mounted on the moving robot. The position and orientation of the lights are extracted by binarization and labeling techniques. Also the boundary lines between ceiling and walls are extracted to identify the order of each light. The robot position is then calculated from the extracted position and known position of the lights. The proposed system can increase the accuracy and reduce the computation time comparing with the other positioning methods using natural landmark. Experimental results are presented to show the performance of the method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.94-100
• /
• 2013

This study is to analyze the accuracy of position determination in cadastral surveying using VRS GNSS(GPS/GLONASS), and is to suggest a possibility to improvement of accuracy in decision making of cadastral surveying result based on this result. As a result of this study, the position accurate of this study, which decides position combining with GPS/GLONASS satellite data is about 3cm more accurate than using only GPS satellite data. Therefore, if GNSS integrated receiving method is to be applied on cadastration, it can be expected to improve to estimate the position accuracy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.169-176
• /
• 2012

GPS(Global Positioning System) is widely used for the position estimation of an aerial vehicle. However, GPS may not be available due to hostile jamming or strategic reasons. A vision-based position estimation method can be effective if GPS does not work properly. In mountainous areas without any man-made landmark, a horizon is a good feature for estimating the position of an aerial vehicle. In this paper, we present a new method to estimate the position of the aerial vehicle equipped with a forward-looking infrared camera. It is assumed that INS(Inertial Navigation System) provides the attitudes of an aerial vehicle and a camera. The horizon extracted from an infrared image is compared with horizon models generated from DEM(Digital Elevation Map). Because of a narrow field of view of the camera, two images with a different camera view are utilized to estimate a position. The algorithm is tested using real infrared images acquired on the ground. The experimental results show that the method can be used for estimating the position of an aerial vehicle.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.868-874
• /
• 2007

This paper proposes an efficient partial matching system and representation by using a region-based method for 2D image, and we applied to an extraction of the ROI(Region of Interest) according to its matching score. The matching templates consist of the global pattern and the local one. The global pattern can make it by using region-based relation between center region and its rest regions in an object. And, the local pattern can be obtained appling to the same method as global, except relation between objects. As the templates can be normalized, we use this templates for extraction of ROI with invariant to size and position. And, our system operates only one try to match, due to normalizing of region size. To use our system for searching and examining if it's the ROI by evaluating the matching function, at first, we are searching to find candidate regions with the global template. Then, we try to find the ROI among the candidates, and it works this time by using the local template. We experimented to the binary and the color image respectively, they showed that the proposed system can be used efficiently for representing of the template and the useful applications, such as partially retrievals of 2D image.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.481-492
• /
• 2005

To guide the guiding robot for the visually impaired carefully, the digital map to be used to search a path must be detailed and has some information about dangerous spots. It also has to search not only safe but also short path through the position data by GPS and INS sensors. In this paper, as the difference of the ability that the visually unpaired can recognize, we have developed the localization tracking system so that it can make a movement path and verify position information, and the global navigation system for the visually impaired using the GPS and INS. This system can be used when the visually impaired move short path relatively. We had also verified that the system was able to correct the position as the assistant navigation system of the GPS on the outside.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2021

The position accuracy of the stand-alone Regional Navigation Satellite System (RNSS) users is more than tens of meters because of various error sources in satellite navigation signals. This paper focuses on wide-area differential (WAD) positioning technique, which is already applied in Global Navigation Satellite System (GNSS), in order to improve the position accuracy of RNSS users. According to the simulation results in the very narrow ground network in regional area, the horizontal position error of stand-alone RNSS is about RMS 11.6 m, and that of RNSS with WAD technique, named the WAD-RNSS, is about RMS 2.5 m. The accuracy performance has improved by about 78%.