• Atmosphere
• /
• v.18 no.4
• /
• pp.507-524
• /
• 2008

In this paper, future climate changes over East Asia($20^{\circ}{\sim}50^{\circ}N$, $100^{\circ}{\sim}150^{\circ}E$) are projected by anthropogenic forcing of greenhouse gases and aerosols using coupled atmosphere-ocean general circulation model (AOGCM) simulations based on Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) B1, A1B and A2 scenarios. Before projection future climate, model performance is assessed by the $20^{th}$ Century (20C3M) experiment with bias, root Mean Square Error (RMSE), ratio of standard deviation, Taylor diagram analysis. The result of examination of the seasonal uncertainty of T2m and PCP shows that cold bias, lowered than that of observation, of T2m and wet bias, larger than that of observation, of PCP are found over East Asia. The largest wet bias is found in winter and the largest cold bias is found in summer. The RMSE of temperature in the annual mean increases and this trend happens in winter, too. That is, higher resolution model shows generally better performances in simulation T2m and PCP. Based on IPCC SRES scenarios, East Asia will experience warmer and wetter climate in the coming $21^{st}$ century. It is predict the T2m increase in East Asia is larger than global mean temperature. As the latitude goes high, the warming over the continents of East Asia showed much more increase than that over the ocean. An enhanced land-sea contrast is proposed as a possible mechanism of the intensified Asian summer monsoon. But, the inter-model variability in PCP changes is large.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.29-39
• /
• 2017

In this study, the GPM (Global Precipitation Mission) IMERG (Integrated Multi-satellitE retrievals for GPM) rainfall data was verified and evaluated using ground AWS (Automated Weather Station) and radar in order to investigate the availability of GPM IMERG rainfall data. The SPI (Standardized Precipitation Index) was calculated based on the GPM IMERG data and also compared with the results obtained from the ground observation data for the Hoengseong Dam and Yongdam Dam areas. For the radar data, 1.5 km CAPPI rainfall data with a resolution of 10 km and 30 minutes was generated by applying the Z-R relationship ($Z=200R^{1.6}$) and used for accuracy verification. In order to calculate the SPI, PERSIANN_CDR and TRMM 3B42 were used for the period prior to the GPM IMERG data availability range. As a result of latency verification, it was confirmed that the performance is relatively higher than that of the early run mode in the late run mode. The GPM IMERG rainfall data has a high accuracy for 20 mm/h or more rainfall as a result of the comparison with the ground rainfall data. The analysis of the time scale of the SPI based on GPM IMERG and changes in normal annual precipitation adequately showed the effect of short term rainfall cases on local drought relief. In addition, the correlation coefficient and the determination coefficient were 0.83, 0.914, 0.689 and 0.835, respectively, between the SPI based GPM IMERG and the ground observation data. Therefore, it can be used as a predictive factor through the time series prediction model. We confirmed the hydrological utilization and the possibility of real time drought monitoring using SPI based on GPM IMERG rainfall, even though results presented in this study were limited to some rainfall cases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.440-447
• /
• 2016

Faced with the recent global economic recession, academics looked to the industrial B2B and B2C markets as potential new growth engines. In the B2B market, focusing on the relationship with customers, the relationship benefits are important, and institutional factors will affect the relationship and relationship values with customers. In this study, the relationship values between South Korea and Taiwan are compared by considering their national characteristics. By applying a mixed research method based on sequential exploratory design, 6 relationship values (supplier knowhow, service support, time to market, delivery performance, personal interaction, and product quality) are extracted. In particular, South Korea and Taiwan give priority to supplier knowhow and service support, respectively. Our research findings have both theoretical and practical implications for other emerging countries, as well as developed countries.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2011

Most of countries start to restrict the emission gases of vehicles especially CO2 because of the global warming. Many vehicle companies including Toyota have launched various HEVs to satisfy the restriction laws and to improve the vehicle's efficiency. However, development for heavy-duty hybrid system is not plentiful rather than the passenger car. In this study, we choose the optimal size of engine, motor and battery for heavy-duty hybrid systems using dynamic programming. Also we analyze the correlation of the system's cost and efficiency because the added cost of vehicle to make the hybrid system is very important factor for the manufacturing companies. Finally, this study suggests a method to choose the appropriate system components size considering its performance and the cost. With this method, it is possible to select the component size for various systems.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.627-633
• /
• 2011

Evaluation of the amount of chloride ion coming from the sea is very important in assessing the life expectancy of Reinforced Concrete structures. Developed in Japan, the incoming salt collector has been used to this day. Unfortunately, the incoming salt collector has had a bad reputation, which is caused by backward wind. Backward wind causes a reduction of the amount of salt collected in collector's gauze. The collector was developed to eliminate the effect of backward wind. Simulation test in the laboratory and site measurement were performed to determine the amount of incoming salt according to the height. The performance was verified through analytic and experimental methods.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.4
• /
• pp.274-282
• /
• 2015

This paper deals with the influence of leakage flow existing in SHF pump model on the analysis of internal flow behaviour inside the vane diffuser of the pump model performance using both experiments and calculations. PIV measurements have been performed at different hub to shroud planes inside one diffuser channel passage for a given speed of rotation and various flow rates. For each operating condition, the PIV measurements have been trigged with different angular impeller positions. The performances and the static pressure rise of the diffuser were also measured using a three-hole probe. The numerical simulations were carried out with Star CCM+ 9.06 code (RANS frozen and unsteady calculations). Some results were already presented at the XXth IAHR Symposium for three flowrates for RANS frozen and URANS calculations. In the present paper, comparisons between URANS calculations with and without leakages and experimental results are presented and discussed for these flow rates. The performances of the diffuser obtained by numerical calculations are compared to those obtained by the three-holes probe measurements. The comparisons show the influence of fluid leakages on global performances and a real improvement concerning the efficiency of the diffuser, the pump and the velocity distributions. These results show that leakage is an important parameter that has to be taken into account in order to make improved comparisons between numerical approaches and experiments in such a specific model set up.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.223-235
• /
• 2006

Textile industry of Korea has been assumed advanced textile industry nation's aspects with production system and equipment. But has been descended in the sector of design, brand, recognition comparing with Italy, Japan, England. And products of middle and low price do not have competitiveness against China, South East Asia. The world's textile industry nation has been confronted with Free Trade, and Regional Trade Blocks. New market has been opened with free Trade, but Trade Blocks(NAFTA, EU, APEC etc.) which encourage regional member country's profit maximize made textile export driven nation to consider strategies to cope with. Advanced textile industry nation divided the work among themselves and composed linking system among them which highly valuable products are manufactured at advanced nation and low price products are manufactured by global outsourcing. The purpose of this study is to analyze impact of process which requires to secure international competitiveness into business performance experimentally.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2011

Smart TV System will lead to drastic change of communication and media industries as one of the emerging next generation network services. However, when the number of concurrent users increases rapidly, the issue of service quality degradation occurs because providing services to many users simultaneously stresses both the server and the network. The server limitation can be circumvented by deploying server clusters. but the network limitation is far less easy to cope with, due to the difficulty in determining the cause and location of congestion and in provisioning extra resources. In order to alleviate these problems, a number of schemes have been developed. Prior works mostly focus on reducing user-centric performance metrics of individual connection, such as the round-trip time(RTT), downloading time or packet loss rate, but tend to ignore the network loads caused by the concurrent connections or global network load balance. In this work, we make an in-depth investigation on the issue of user grouping for massive Smart TV services through simulations on actual Internet test-bed, PlanetLab.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.107-119
• /
• 2013

This paper reinforced security under the network evaluation of wire wireless integration of NEMO (NEwork MObility) supporting mobility and network-based PMIPv6 (Proxy Mobile IPv6). It also proposes $SK-L^2AS$ (Symmetric Key-Based Local-Lighted Authentication Scheme) based on simple key which reduces code calculation and authentication delay costs. Moreover, fast handover technique was also adopted to reduce handover delay time in PMIPv6 and X-FPMIPv6 (eXtension of Fast Handover for PMIPv6) was used to support global mobility. In addition, AX-FPMIPv6 (Authentication eXtension of Fast Handover for PMIPv6) is proposed which integrated $SK-L^2AS$ and X-FPMIPv6 by applying Piggybacks method to reduce the overhead of authentication and signaling. The AX-FPMIPv6 technique suggested in this paper shows that this technique is better than the existing schemes in authentication and handover delay according to the performance analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.411-418
• /
• 2016

In accordance with global energy conservation policies such as MEPS(Minimum Energy Performance Standard), electric motor industry is moving to super-high-efficiency machines and research to develop IE4 (International Energy Efficiency Class4) motors has been launched. In this situation, SynRM (Synchronous Reluctance Motor) has been attracting attention in place of induction motor which hardly provides super premium efficiency. As a result, much research on SynRM is being performed at home and abroad. Also, some products have already been appearing in the market. Compared to induction motor, SynRM has better efficiency per unit area and wider operating range. Although the utilization of control system in synchronous motor results in higher prices, we still need to concentrate on developments of SynRM so as to comply with the new policies. This study demonstrated the electromagnetic design methods of super-premium SynRM while maintaining the frame of existing IE3 induction motor for blower. We documented the design procedures for generating high saliency which is the most essential and mechanical stress analysis is also treated. In conclusion, we proved the validity of our design by manufacturing and testing our SynRM models.