• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.304-315
• /
• 2018

Harmony Search (HS) is a recently developed metaheuristic algorithm that is widely known to many researchers. However, due to the increasing complexity of optimization problems, the optimal solution cannot be efficiently found by HS. To overcome this problem, there have been many studies that have improved the performance of HS by modifying the parameter settings and incorporating other metaheuristic algorithms. In this study, Copycat HS (CcHS) is suggested, which improves the parameter setting method and the performance of searching for the optimal solution. To verify the performance of CcHS, the results were compared to those of HS variants with a set of well-known mathematical benchmark problems. The effectiveness of CcHS was proven by finding final solutions that are closer to the global optimum than other algorithms in all problems. To analyze the applicability of CcHS to engineering optimization problems, it was applied to a design problem for Water Distribution Systems (WDS), which is widely applied in previous research. As a result, CcHS proposed the minimum design cost, which was 21.91% cheaper than the cost suggested by simple HS.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.128-136
• /
• 2015

Sky View Factor (SVF) is one of the urban morfometri parameters that impact on the Urban Heat Island (UHI). SVF analisys was conducted in the city of Jakarta to investigate the relationship between urban temperature with urban morfometri. Jakarta City is the most populous city in the world that has a surrounding area $66,152km^2$ and the total population around 23 million people. The population of the city is the sixth highest in the world today. SVF measurements done by taking pictures at the six stations that have different morphological characteristics namely (1) the narrow streets Apartment Cempaka Mas (JS ITC), (2) the width of the road Apartment Cempaka Mas (JL ITC), (3) in front of Colleges Kanisius (DKK), (4) in front of office Journalist of Indonesia (DKWI), (5) Utan Kayu (UK), and (6) Tambun (TB). SVF value is obtained from the photgraphic image. Taking pictures at the location using a Nikon D90 camera with a Nikon Fisheye Nikkor 10.5 mm 1 : 2.8 G ED, further processed through a global mapper program. Therefore, the SVF derived from the six stations that vary 0.21 to 0.78. Temperature measurement is done during daylight hours from 06:00 am to 18:00 pm during the Western Part of Indonesia (WIB). Measurements performed at three different times, namely working days (HK) regular holidays (HCB) national holidays (HCN). The results showed that the highest average temperature of $33.32^{\circ}C$, occurring at UK station (SVF=0.45) at the time of HCB. Meanwhile, the average low temperature of $31.22^{\circ}C$ occurred at JLITC station (SVF=0.42). The two-time occurred on ordinary holidays. Maximum temperature of $38.4^{\circ}C$ occurred in Utan Kayu station (SFV=0.45) that occurred at 11.00 hrs, normal holidays. Furthermore minimum temperature 24.5 occurred at Tambun station (SVF=0.78) at 06.00 hrs in the morning at the usual holidays and national holidays. In general, the results showed that areas with large SVF has a lower temperature compared with areas with smaller SVF. Though, are not the only factors that matter, but this research may show that an increase in temperature in the city of Jakarta. Therefore, it is necessary to mitigate the serious from the government or society.

• Journal of Environmental Impact Assessment
• /
• v.14 no.5
• /
• pp.347-353
• /
• 2005

The risk assessment is the qualitative or quantitative evaluation of the risk posed to human health and the environment by the actual or potential presence or release of hazardous substances, pollutants or contaminants. The environmental impact assessment (EIA) is assessed by the environmental criteria, and risk assessment is assessed by the risk rate. Risk rate based on dose-response values may not be easy to apply on regulatory basis like EIA for uncertainty. Internationally there is an example of OECD program. Risk assessment of High Production Volume (HPV) Chemicals has started since the OECD Program with the 1990 Council Act on the Co-operative Investigation and Risk Reduction of Existing Chemicals. These HPV chemicals include all chemicals produced or imported at levels greater than 1,000 tonnes per year in at least one Member country or in the European Union region. The SIDS called the Screening Information Data Set is regarded as the minimum information needed to assess an HPV chemical to determine whether any further work should be carried out or not. All the data elements of SIDS including assessment for environment and health are prepared as three formats of the full SIDS Dossier, the SIDS Initial Assessment Report (SIAR), and the SIDS Initial Assessment Profile (SIAP) of an HPV chemical. In 1998 the global chemical industry through the International Council of Chemical Associations (ICCA) has joined to work with OECD. The OECD has assessed approximately 1,000 chemicals from 1991 through 2004 with ICCA. Till the February of 2005, 592 chemicals of those chemicals completed SIDS reports. Member countries have been targeted the goal of 1,000 new chemicals from 2005 to 2010 and Korea shared 36 chemicals from the 1,000 new chemicals. Currently Korea has completed SIDS reports of 7 chemicals among sponsored 24 chemicals. In conclusion SIDS project will be linked to national program for outputs application with more reliable production. Both the OECD and industry will carry out their commitment to complete assessments for more and the remaining chemicals assessment. The major outputs will contribute to cope with international chemical management.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.310-320
• /
• 2014

Backgrounds: Endotoxin, which found in the outer membrane of the gram-negative bacteria cell wall, makes up almost all of the lipopolysaccharide(LPS). When people are exposed to endotoxin,it can result in diverse health effects such as an airway irritation and inflammation, fever, malaise, bronchitis, allergic asthma, toxic pneumonitis, hypersensitivity lung disease. Cases among the elderly, children or pregnant can occur more frequently than a healthy adult if they are repeatedly exposed to the existing endotoxin. Therefore, we investigated and assessed the environmental characteristics associated with the airborne endotoxin concentration level in six hospital lobbies. Method: Endotoxin from indoor air in six hospital lobbies was measured by an area sampling method and analyzed according to American Society for Testing and Materials International(ASTM international) E2144-01. Total suspended particulate(TSP), carbon dioxide($CO_2$), temperature and humidity were also measured by using direct reading measurements or airborne sampling equipment at the same time. Environmental characteristics were appropriately divided into two or three groups for a statistics analysis. One-way analysis variable(one-way ANOVA) was used to examine a difference of the endotoxin concentration, depending on the environmental characteristics. In addition, only variables with p-value(p<0.25) were eventually designed to the best model by using multiple regression analysis. Results: The correlation analysis result indicated that TSP(p=0.003) and $CO_2$(p<0.0001) levels were significantly associated with endotoxin concentration levels. In contrast, temperature(p<0.068) and humidity(p<0.365) were not associated with endotoxin concentration. Levels of endotoxin concentration were statistically different among the environmental characteristics of Service time(p=0.01), Establishment of hospital(p<0.001), Scale of hospital(p=0.01), Day average people using hospital(p=0.03), Cleaning time of lobby(p=0.05), Season(p<0.001), and Cleaning of ventilation system(p<0.001) according to ANOVA. Finally, the best model(Adjusted R-square=72%) that we designed through a multiple regression test included environmental characteristics related to Service time, Area of lobby, Season, Cleaning of ventilation system, and Temperature. Conclusions: According to this study, our result showed a normal level of endotoxin concentration in the hospital lobbies and found environmental management methods to reduce the level of endotoxin concentration to a minimum. Consequently, this study recognized to be requirement for the management of ventilation systems and an indoor temperature in order to reduce the level of endotoxin concentration in the hospital lobbies.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.229-237
• /
• 2019

This study was conducted to estimate annual reference evapotranspiration (ET₀) for the agro-climatic zones for rice paddy fields in South Korea between 1980 and 2015. The daily ET₀ was estimated by applying the Penman-Monteith method to meteorological data from 61 weather stations provided by Korean Meteorological Administration (KMA). The average of annual ET₀ from 1980 to 2015 was 1334.1±33.89 mm. The ET₀ was the highest at the Southern Coastal Zone due to their higher air temperature and lower relative humidity. The ET₀ had significantly increased with 2.81 mm/yr for the whole zones over 36 years. However, the change rate of it was different among agro-climatic zones. The annual ET₀ highly increased in central zones and eastern coastal zones. In terms of correlation coefficient, the temporal change of the annual ET₀ was closely related to variations of four meteorological factors (i.e., mean, minimum temperatures, sunshine duration, and relative humidity). The results demonstrated that whole Korean agro-climatic zones have been undergoing a significant change in the annual ET₀ for the last 36 years. Understanding the spatial pattern and the long-term variation of the annual ET₀ associated with global warming would be useful to improve crop and water resource managements at each agro-climatic zone of South Korea.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.358-365
• /
• 2019

An agrivoltaic systems (AVS) is mixed systems associating photovoltaic panels (PVPs) and crop cultivation at the same time on the given land area. It is receiving attention to improve rural economy. However, it is likely that, the crop yield should be decreased due to the reduced absorption of solar radiation by leaves. Thus, before popularizing the AVS, it is necessary to comprehend the degree of shading by PVPs in AVS. In this study, the change of radiation condition under AVS mimic shading net was investigated. The minimum and maximum of difference of photosynthetically active radiation (PAR) between under and outside shading net were 3.03 mol/㎡/day on a cloudy day and 17.08 mol/㎡/day on a sunny day. This difference decreased when the ratio of diffuse irradiance to global irradiance increased. Such a shading effect resulted in the increase of rice height and decrease of rice tillering.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.1
• /
• pp.26-32
• /
• 2015

Purpose When a surgeon examines the morphology of skull of patient, locations of craniometric landmarks of 3D computed tomography(CT) volume are one of the most important information for surgical purpose. The locations of craniometric landmarks can be found manually by surgeon from the 3D rendered volume or 2D sagittal, axial, and coronal slices which are taken by CT. Since there are many landmarks on the skull, finding these manually is time-consuming, exhaustive, and occasionally inexact. These inefficiencies raise a demand for a automatic localization technique for craniometric landmark points. So in this paper, we propose a novel method through which we can automatically find these landmark points, which are useful for surgical purpose. Materials and Methods At first, we align the experimental data (CT volumes) using Frankfurt Horizontal Plane (FHP) and Mid Sagittal Plane(MSP) which are defined by 3 and 2 cranial landmark points each. The target landmark of our experiment is the anterior nasal spine. Prior to constructing a statistical cubic model which would be used for detecting the location of the landmark from a given CT volume, reference points for the anterior nasal spine were manually chosen by a surgeon from several CT volume sets. The statistical cubic model is constructed by calculating weighted intensity means of these CT sets around the reference points. By finding the location where similarity function (squared difference function) has the minimal value with this model, the location of the landmark can be found from any given CT volume. Results In this paper, we used 5 CT volumes to construct the statistical cubic model. The 20 CT volumes including the volumes, which were used to construct the model, were used for testing. The range of age of subjects is up to 2 years (24 months) old. The found points of each data are almost close to the reference point which were manually chosen by surgeon. Also it has been seen that the similarity function always has the global minimum at the detection point. Conclusion Through the experiment, we have seen the proposed method shows the outstanding performance in searching the landmark point. This algorithm would make surgeons efficiently work with morphological informations of skull. We also expect the potential of our algorithm for searching the anatomic landmarks not only cranial landmarks.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.5
• /
• pp.17-26
• /
• 2016

This paper presents an adaptive slicing method based on merging vertical layer polylines. Firstly, we slice the input 3D polygon model uniformly with the minimum printable thickness, which results in bounding polylines of the cross section at each layer. Next, we group a set of layer polylines according to vertical connectivity. We then remove polylines in overdense area of each group. The number of layers to merge is determined by the layer thickness computed using the cusp height of the layer. A set of layer polylines are merged into a single polyline by removing the polylines within the layer thickness. The proposed method maintains the shape features as well as reduces the printing time. For evaluation, we sliced ten 3D polygon models using our method and a global adaptive slicing method and measured the total length of polylines which determines the printing time. The result showed that the total length from our method was shorter than the other method for all ten models, which meant that our method achieved less printing time.

• Korean Journal of Environmental Biology
• /
• v.27 no.1
• /
• pp.48-57
• /
• 2009

The characteristics of physico-chemical factors and the species compositions of phytoplankton were investigated to analyze the marine ecosystem at the depths during summer in the coast of Dokdo (stations DOK1$\sim$3). The mean values of conductivity (32 mS cm$^{-1}$), total dissolved solids (45 mg L$^{-1}$), salinity (35.5 psu), total suspended solids (39 mg L$^{-1}$) were the highest in DOK1. The biomass (chl-${\alpha}$) of phytoplankton was the highest in the surface of station DOK1 (3.1 ${\mu}g$ L$^{-1}$). By means of physico-chemical factors (salinity, turbidity, chl-${\alpha}$, T-N, T-P and Si), the coast of Dokdo was estimated to be more polluted than the previous results in 2000. A total of 72 species in Dokdo were composed of 54 species (76.1%) for Bacillariophyceae and 13 species (18.3%) for Dinophyceae, 3 species (4.2%) for Chrysophyceae and 1 species (1.4%) for Cyanophyceae. The standing crops of phytoplankton were the highest (8.5 $\times$ 10$^4$ cells L$^{-1}$) at 20 m of station DOK1, while they were the lowest (1.65 $\times$ 10$^4$ cells L$^{-1}$) at 30 m of station 1. The dominance index was maximum (0.73) at 10 m of station DOK1 and was minimum (0.4) at 30 m of station 1. The diversity index was the highest (2.92) in the surface of station 2, while it was the lowest at 20 m (1.58). The dominant species of phytoplankton were Chaetoceros affinis (3.3 $\times$ 10$^4$ cells L$^{-1}$) at 20 m, Climacosphenia moniligera (2.8 $\times$ 10$^4$ cells L$^{-1}$) at 40 m and Melosira juergensii (1.7 $\times$ 10$^4$ cells L$^{-1}$) at 10 m of station DOK1. At the surface of station DOK2, the dominant species were Bacillaria paxillifer and Richelia intracellularis (1.4 $\times$ 10$^4$ cells L$^{-1}$, respectively), while it was Paralia sulcata (1.6 $\times$ 10$^4$ cells L$^{-1}$) at the surface of station DOK3. The station DOKl, where affected by upwelling, turbulence and convection due to the East Korean Warm Current, was the most eutrophicated water body in three stations. The monitoring of marine ecosystem in the coast of Dokdo should be continued to show the alternatives for water and species conservation and to purify the eutrophicated water body due to artificial pollutants as well as physico-chemical factors by the global warming, the climatic change, CO$_2$ etc.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.174-180
• /
• 2020

With the removal of underwater obstacles in the Busan New Port, the water depth of the pier has been secured up to 17m, and the port authority is constantly responding to the trend of container vessels becoming larger. Also, in 2020, 24,000TEU class container ships are entering to the port, and it is planned to secure the depth in the port to 23 m later in line with this trend. Mega container ships must check in advance the factors to be considered depending on the situation at the time, and for this, it is judged that information sharing among stakeholders is necessary. In this paper, to understand the effect of the corresponding route because of the mega container ships, a transit safety evaluation was conducted based on statistical data on ship entry and departure and maneuver characteristics of corresponding ships. The result showed that the transit of the mega container ships has increased up to 8.4% comparing to the risk of 4,000TEU class container ships. Additionally, safety measures such as minimum safety depth and tug operation plans were presented by gathering opinions on operational characteristics from the perspective of pilotage for safe transit in the Busan New Port area. Through this, it is considered that it will be possible to contribute to the prevention of accidents when entering and leaving the Busan New Port.