• 보존과학연구
• /
• 통권29호
• /
• pp.221-238
• /
• 2008

Roofing tiles are very important archaeological artifacts which show science, architecture of that time, as well as information about the culture. It has been studied by many researchers steadily, but only focusing on archaeological, art historical and architectural study, so it is very difficult to find natural science research. Gyeongbokgung's roofing tiles were excavated from the ruins of same site, however glaze, body colour and shape of tiles are very diverse with the naked eye. Through natural science research which analyze the chemical composition and physical characteristics of roofing tiles's body and glaze examine the physical and chemical characteristics of each roofing tiles. the result of analazed roofing tiles is following. when roofing tiles were classified by 전암대자율 and chromaticity, each group has part of some matches. When you compare with green gazed traditional brick's glaze of Silla period, Gyeongbokgung roofing tiles have more $Al_2O_3$ and less PbO than Silla period's. We can see the technology of increasing firing temperature is better. and glaze colour depends on content of $Fe_2O_3$ and CuO. A lot of CuO tend to be more blue.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.41-47
• /
• 2015

Celadon shards from Gangjin and Buan were analyzed for their color, chemistry and microstructures. They exhibited similar chromatic characteristics in a $CIEL^*a^*b^*$ analysis. All of the glazes assessed showed comparable compositional areas, while the bodies from Gangjin shards had higher $RO_2$ concentrations. A high degree of similarity was also noted in the microstructures of the glaze and bodies from both regions. Anorthite crystals appeared in the glaze layer, and phase separation behavior developed around these crystals. This may have been caused by the glaze chemistry and the sintering process given the lengthy heating and cooling time. A Raman analysis indicated higher isolated $SiO_4$ unit ($Q_0$) values for the Buan samples. This can stem from the higher firing temperature or the longer sintering process.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.61-65
• /
• 2017

Examined in this study were the effects of copper oxide (II) addition and sintering conditions on the chromatic characteristics of copper glaze. Oxidatively sintered samples exhibited the negative increase of $CIEa^*$ and the positive increase of $CIEb^*$ with the increase of CuO concentration, leading to Green and Green-Yellow coloration. On the other hand, $CIEa^*$ and $CIEb^*$ of reductively sintered samples were positively increased in direct proportion. The green color of oxidatively sintered samples was originated from the $Cu^{2+}$ ions formed by the dissolution of CuO. The reductively sintered samples resulted in dull tone red color with low chroma. Such behavior seems to be influenced by the interplay of metal Cu aggregation, metal Cu globule, and $Cu_2O$ formed in the glaze layer through the redox interaction of CuO during the sintering process.

• 보존과학연구
• /
• 통권30호
• /
• pp.189-202
• /
• 2009

Ceramics from Taean shipwreck were studied to investigate the deterioration by soluble salts and desalination pattern according to each ceramic characterization. NaCl crystals were found as a crystal growth on the ceramic microstructure and deteriorated to push off the glaze layer of some Puncheong ware sample. As a result of monitoring the desalination pattern of ceramics for 74days, the earthenware sample with big pores and no glaze removed soluble salts so fast, but Puncheong ware and Whiteware samples removed lots of soluble salts slowly and continuously. Generally, it takes long time to remove soluble salts from porcelains, due to small pores and glaze, but the long-term desalination probably can cause the damage on the surface layer such like glaze. As some soluble salts still remains in the ceramic microstructures after desalination, it is very important to control and keep the relative humidity stable through the proper storage. There are various ceramic deterioration patterns by soluble salts. Therefore, it needs to select the desalination method of ceramics from shipwreck, considering the material characteristics and the production techniques.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.267-274
• /
• 2016

PURPOSE. This study aimed to evaluate the effect of surface treatments on bond strength of indirect composite material (Tescera Indirect Composite System) to monolithic zirconia (inCoris TZI). MATERIALS AND METHODS. Partially stabilized monolithic zirconia blocks were cut into with 2.0 mm thickness. Sintered zirconia specimens were divided into different surface treatment groups: no treatment (control), sandblasting, glaze layer & hydrofluoric acid application, and sandblasting + glaze layer & hydrofluoric acid application. The indirect composite material was applied to the surface of the monolithic zirconia specimens. Shear bond strength value of each specimen was evaluated after thermocycling. The fractured surface of each specimen was examined with a stereomicroscope and a scanning electron microscope to assess the failure types. The data were analyzed using one-way analysis of variance (ANOVA) and Tukey LSD tests (${\alpha}$=.05). RESULTS. Bond strength was significantly lower in untreated specimens than in sandblasted specimens (P<.05). No difference between the glaze layer and hydrofluoric acid application treated groups were observed. However, bond strength for these groups were significantly higher as compared with the other two groups (P<.05). CONCLUSION. Combined use of glaze layer & hydrofluoric acid application and silanization are reliable for strong and durable bonding between indirect composite material and monolithic zirconia.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.619-625
• /
• 2006

The study was intended to investigate production tools and conditions of oil spot following calculating optimal composition of oil spot tenmoku glaze which can be produced at 1250$\sim$l260$^{\circ}C$. Since oil spot is influenced by the viscosity of glaze, viscosity of various glazes fit for oil spot production was determined by an SciGlass 6.0-based calculating method. Applied amount and calcinating conditions of the resulting substance of oil spot, $Fe_2O_3$, were analyzed. As a result, the viscosity of the glaze durable at 1260$^{\circ}C$ was found to range from 4.2 to 4.4, natural cooling was used after oxidizing calcinations at 1260$^{\circ}C$ for an hour, and the best oil spot tenmoku was produced by the natural cooling process after 1 h calcinations at 1150$^{\circ}C$ in the middle of natural cooling. Also, the study showed that thickness of glaze was found to have an effect on the production of oil spot and resulting oil spot was filled mostly with $Fe_2O_3$.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.167-172
• /
• 2020

PURPOSE. The aim of the present study was to investigate the passive fit of metal substructure after repetitive firing processes in implant-supposed prosthesis. MATERIALS AND METHODS. Five implants (4 mm diameter and 10 mm length) were placed into the resin-based mandibular model and 1-piece of screw-retained metal substructure was produced with the direct metal laser sintering (DMSL) method using Co-Cr compound (n = 10). The distance between the marked points on the multiunit supports and the marginal end of the substructure was measured using a scanning electron microscope (SEM) at each stage (metal, opaque, dentin, and glaze). 15 measurements were taken from each prosthesis, and 150 measurements from 10 samples were obtained. In total, 600 measurements were carried out at 4 stages. One-way ANOVA test was used for statistical evaluation of the data. RESULTS. When the obtained marginal range values were examined, differences between groups were found to be statistically significant (P<.001). The lowest values were found in the metal stage (172.4 ± 76.5 ㎛) and the highest values (238.03 ± 118.92 ㎛) were determined after glaze application. When the interval values for groups are compared with pairs, the differences between metal with dentin, metal with glaze, opaque with dentin, opaque with glaze, and dentin with glaze were found to be significant (P<.05), whereas the difference between opaque with metal was found to be insignificant (P=.992). CONCLUSION. Passive fit of 1-piece designed implant-retained fixed prosthesis that is supported by multiple implants is negatively affected by repetitive firing processes.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.34-41
• /
• 2017

본 연구는 아연결정 Willemite($Zn_2SiO_4$)유의 합성에서 소성 전의 전처리 과정이 결정의 결합반응에 미치는 영향을 규명하고자 한다. 시료 전처리 방법으로 원료의 체거름과 초음파분산실험을 통해서 실험 분석하였다. 그 결과, 기본유시료의 체거름과 초음파분산은 물리적 공정만으로 Zn-Si 결합이 용이하도록 Si 본딩에 변화를 가져와 저온($680^{\circ}C$)에서부터 willemite의 생성을 촉진시켰다. 원료의 분산은 체거름 만으로도 willemite의 저온 생성을 촉진시키는 것으로 나타났으며 특히 초음파 분산 실험의 결과는 willemite생성의 저온 반응에 효과가 더욱 극명하게 나타났다. 이러한 비 소성 전 처리 공정에 의한 결정생성은 경제적으로도 큰 가치가 있을 것으로 판단된다.

• Applied Biological Chemistry
• /
• 제44권4호
• /
• pp.230-234
• /
• 2001

재래법으로 제조한 된장을 담금용기를 달리하여 각각 담가 숙성시키면서 숙성기간 중 담금용기에 따른 된장의 품질변화를 조사하였다. 사용된 담금용기는 오지항아리, 오지항아리와 유리덮개 그리고 플라스틱통이었다. 된장의 수분 함량은 숙성 중 감소하였는데 오지항아리와 유리덮개를 사용한 구의 수분 함량이 가장 크게 감소하였다. 수용성 질소 함량은 숙성 8개월에 $4.56{\sim}5.80%$로 가장 높았고 오지항아리와 유리덮개에 담근 된장이 최대 함량을 보였다. 아미노산성 질소 함량은 숙성 12개월까지 계속 증가하였고 숙성 12개월의 아미노산성 질소 함량은 오지 항아리에 담근 된장이 $1.25{\sim}1.27%$로 플라스틱 통에 담근 된장 보다 높았다. 플라스틱통에 숙성시킨 된장의 품질을 관능적으로 평가한 결과 숙성 4개월부터, 다른 용기를 사용하여 담근 된장에 비하여 유의적으로 낮게 나타났다.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.187-194
• /
• 1989

Synthesis of spinel pigment on ZnO-Fe2O3 system. The object of this research is the synthesis of new spinel pigments on the basic of ZnO-Fe2O3 system which was substituted by ZnO-Fe2O3 by MgO-Al2O3. This research was progressed by measuring the X-ray diffraction and the reflectances of the substitued ZnO-Fe2O3 group. Which was obtained by sintering at the temperature of 1,00$0^{\circ}C$, 1,10$0^{\circ}C$, 1,20$0^{\circ}C$ and 1,25$0^{\circ}C$ and them by regrinding. In order to coloring test, here basic compositions of Barium glaze, Zinc glaze, Lime glaze, Lead glaze and Talc glaze used in this experiment are obtained from the ceramic work. Adding synthetic stains in these basic glazes with 3%, mixing and glazing on the specimen. The specimens was fired at 1,28$0^{\circ}C$ in reducing and oxidizing atmosphere in the gas kiln. The results of the research as follow. 1. Many kinds of spinel pigment was produced on ZnO-Fe2O3 system that is to say, not always only spinel. 2. Spinel peak was observed strongly on the ZnO-Fe2O3 system withsubstituting by MgO-Fe2O3 and MgO-Al2O3 group(the ratio of MgO, Al2O3 being increased, observed more strongly). 3. The most effective temperature ranges was 1,20$0^{\circ}C$~1,25$0^{\circ}C$. 4. The color of spinel pigments on this system was observed by "stable YR". 5. It was yellow red in oxidizing and green in reducing atmosphere on the coloring test.ring test.