• Elastomers and Composites
• /
• 제59권1호
• /
• pp.17-21
• /
• 2024

Solution styrene-butadiene rubber (S-SBR) is used to improve the wet grip and rolling resistance properties of tire treads. As blending of SBRs can improve the physical properties of tire treads, we investigated the effects of SBR type and blending ratio on the physical properties. Twelve SBR/SBR biblend composites were prepared using four SBRs with different microstructures. The glass transition temperature (T_g), tanδ at 0℃ (wet grip predictor), and tanδ at 60℃ (rolling resistance predictor) were obtained from dynamic mechanical analysis, and were compared to the expected values obtained from the results of single SBR samples. Most of the SBR/SBR biblend composites exhibited crosslink densities lower than the expected values. The tanδ values at 0℃ and 60℃ of the SBR/SBR blend composites deviated from the expected values, with many of the deviations being disadvantageous. Of the twelve composites, six samples had higher 0℃ tanδ values than the corresponding expected values, and four exhibited superior wet grip properties to those of the SBR single samples. In addition, two of the twelve samples exhibited improved rolling resistance properties as compared with the single SBR samples. Finally, four samples exhibited lower T_g values than expected, and the T_g of one composite was lower than those of the single SBR samples.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.646-649
• /
• 2007

The effect of the addition of 2 kinds of chemically modified starches (the anti-caking agents; tapioca starch and com starch) on caking of ramen soup was observed using a low-resolution proton-pulsed nuclear magnetic resonance (NMR) technique. After storing ramen soup samples with diverse compositions of modified starch at 20-40% relative humidity for 4 weeks, changes in the spin-spin relaxation time constant ($T_2$) were measured as a function of temperature. $T_2-Temperature$ curves for ramen soup containing modified starches showed that the caking initiation temperature (glass transition temperature) was increased by $5^{\circ}C$ following the addition of only 0.5% modified cornstarch. The results indicate that the modified com starch used in this study would be an effective anti-caking agent for ramen soup, thus prolonging the shelf life of the product.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.560-564
• /
• 2022

In this study, lanthanum boron silicate glasses were prepared with a composition of x Li₂O-(60-x)B₂O₃-5CaO-5BaO-7ZnO-10SiO₂-10La₂O₃-3Y₂O₃ where x = 1,3,5,7, and 9 mol%. Each composition was melted in a platinum crucible under atmospheric conditions at 1,400 ℃ for 2 h. Clear glasses with a transmittance exceeding 85 % were fabricated. Their optical, thermal, and physical properties, such as refractive index, Abbe number, density, glass transition (T_g) and Knoop hardness were studied. The results demonstrated that refractive index was between 1.6859 and 1.6953 at 589.3 nm. The Abbe number was calculated using an equation for 589.3 nm (nd), 656.3 nm (nf) and 486.1 nm (nc) and was observed to be in the range from 57.5 to 62.6. As the Li₂O content increased, the glass transition temperature of the optical glass decreased from 608 ℃ to 564 ℃. If glass mold pressing is performed using a material with a low transition temperature and high mechanical strength, then the optical glasses developed in this study can be completely commercialized.

• 폴리머
• /
• 제26권4호
• /
• pp.501-507
• /
• 2002

본 논문에서는 bisphenol-S (BPS)와 epichlorohydrin (ECH)를 NaOH의 촉매하에서 중합시켜 diglycidylether of bisphenol-S (DGEBS) 에폭시 수지를 합성하였다. IR, NMR spectra 분석, 그리고 원소분석에 의해 합성한 DGEBS 에폭시 수지의 화학구조를 확인하였다 산무수화물계 phthalic anhydride (PA)와 tetrahydrophthalic anhydride (THPA)를 경화제로 사용하여 DSC에 의한 열분석을 통하여 DGEBS 에폭시 수지의 경화 동력학과 유리전이온도 ($T_g$)를 고찰하였으며, TGA 열분석을 사용하여 경화된 시편의 열안정성을 측정하였다. 실험 결과 DGEBS/PA계의 경화 활성화 에너지 ($E_a$)는 DGEBS/THPA계보다 높았지만 ($T_g$), 열분해 개시온도 (IDT), 그리고 분해 활성화 에너지 ($E_t$)는 DGEBS/THPA계보다 낮았다. 이는 경화제의 ring strain에 의하여 DGEBS/THPA계의 가교 밀도가 증가하였기 때문인 것으로 사료된다.

• 한국식품과학회지
• /
• 제51권5호
• /
• pp.432-437
• /
• 2019

본 연구에서는 국내에서 육종된 쌀품종의 전분에 대한 분자 및 결정구조을 밝히고 이와 같은 결과들이 상전이 특성에 미치는 영향을 조사하였다. 새미면 전분은 아밀로스 함량이 가장 높았으며, 다른 쌀전분에 비해 상대적으로 아밀로펙틴의 짧은 사슬(DP 6-12)과 평균사슬길이, 치반점도와 최종점도, 호화온도와 엔탈피, 2차 상전이인 ${T_g}^{\prime}$이 유의적으로 높았으며, 반대로 최고점도와 강하점도, ice melting 온도와 엔탈피가 유의적으로 낮았다. 아밀로스 함량이 가장 낮은 선향흑미는 다른 전분에 비해 유의적으로 높은 ice melting 엔탈피를 나타냈고 ${T_g}^{\prime}$이 높았다. 결과적으로 쌀 전분의 상전이 특성은 분자 및 결정 구조에 큰 영향을 받는 것을 확인할 수 있었다.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1127-1132
• /
• 2010

Borosilicate glass was prepared in the composition of 81% $SiO_2$, 4% $Na_2O$, 2% $Al_2O_3$, 13% $B_2O_3$. The albite phase($NaAlSi_3O_8$) increased with the $ZrO_2$(0~10wt.%) addition. For measurement of glass transition temperature($T_g$), crystallization temperature($T_{c,max}$) measured by differential thermal analysis. The $T_g$ and $T_{c,max}$ were $510{\sim}530^{\circ}C$ $650{\sim}670^{\circ}C$, respectively. The crystallized glass was heated at various conditions(temperature, time). After nucleation at $550^{\circ}C$ for 2hours prior to crystal growth at $650^{\circ}C$ for 4hours, the resulting Vickers hardness, fracture toughness and bending strength were about $736H_v$, $1.0779MPa{\cdot}m^{1/2}$, and 493MPa, which were 17%, 45% and 149% higher than parent borosilicate glass, respectively. Crystal size and transmittance of crystallized borosilicate glass were analyzed by FE-SEM, EDX and UV-VIS-NIR spectrophotometer. Transmittance of crystallized borosilicate glass was decreased with increasing $ZrO_2$(wt%) at visible-range. The results prove that light-weight bulletproof can be fabricated by the crystallization of borosilicate glass.

• Advances in materials Research
• /
• 제8권4호
• /
• pp.337-359
• /
• 2019

Shape Memory Polymer Composites (SMPC) have gained popularity over the last few decades due to its flexible shape memory behaviour over wide range of strains and temperatures. In this paper, non-linear bending analysis has been carried out for SMPC beam under the application of uniformly distributed transverse load (UDL). Simplified C⁰ continuity Finite Element Method (FEM) based on Higher Order Shear Deformation Theory (HSDT) has been adopted for flexural analysis of SMPC. The numerical solutions are obtained by iterative Newton Raphson method. Material properties of SMPC with Shape Memory Polymer (SMP) as matrix and carbon fibre as reinforcements, have been calculated by theory of volume averaging. Effect of temperature on SMPC has been evaluated for numerous parameters for instance number of layers, aspect ratio, boundary conditions, volume fraction of carbon fiber and laminate stacking orientation. Moreover, deflection profile over unit length and behavior of stresses across thickness are also presented to elaborate the effect of glass transition temperature (T_g). Present study provides detailed explanation on effect of different parameters on the bending of SMPC beam for large strain over a broad span of temperature from 273-373K, which encompasses glass transition region of SMPC.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.703-719
• /
• 2017

Miscanthus had a higher lignin content (19.5 wt%) and carbohydrate (67.6 wt%) than other herbaceous crops, resulting in higher pellet strength and positive effect on combustion. However, miscanthus also contains a high amount of hydrophobic waxes on its outer surface, cuticula, which limits the pellet quality. The glass transition of lignin and cuticula were related to forming inter-particle bonding, which determined mechanical properties of pellet. To determine the effects of surface waxes, both on the pelletizing process and the pellet strength were compared with raw and extracted samples through solvent extraction. In addition, to clarify the relationship between pellet process parameters and bonding mechanisms, the particle size and temperature are varied while maintaining the moisture content of the materials and the die pressure at constant values. Furthermore, kraft lignin was employed to determine the effect of kraft lignin as an additive in the pellets. As results, the removal of cuticula through ethanol extractions improved the mechanical properties of the pellet by the formation of strong inter-particle interactions. Interestingly, the presence of lignin in miscanthus improves its mechanical properties and decreases friction against the inner die at temperatures above the glass transition temperature ($T_g$) of lignin. Consequently, it could found that the use of kraft lignin as an additive in pellet reduced friction in the inner die upon reaching its glass transition temperature.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.188-194
• /
• 2016

In this study, novel quaternary plastomers consisting of ethylene, 1-hexene, high ${\alpha}$-olefin, and divinylbenzene were prepared using Zr metallocene catalyst, borate type cocatalyst, and tri-isobutylaluminium. The molar ratio changes of 1-hexene and high ${\alpha}$-olefin (1-octene, 1-decene, and 1-dodecene) had an effect on the properties of the quaternary plastomers. The structure of the quaternary plastomers was characterized using $^1H$ NMR. Molecular weight properties, crystallinity, and thermal properties of the plastomers were determined by GPC, WAXS, and DMA, respectively. Compared with the terpolymers prepared in our previous study, molecular weight and molecular weight distribution of the quaternary polymers were very similar, whereas glass transition temperature ($T_g$) was very low. Also, hardness and tensile properties of the quaternary plastomers were measured.

• 멤브레인
• /
• 제2권2호
• /
• pp.129-134
• /
• 1992

Poly(n-butyl methacrylate)(PnBMA)에 의한 메탄가스의 용해도를 35atm의 압력까지 측정하였다. 용해도의 측정은 -$10^{\circ}$C 에서 30$^{\circ}$C까지의 온도범위에서 용적법에 의하여 실시하였다. PnBMA에 의한 메탄가스의 용해도는 유리 전이온도 이하에서 측정압력에 대하여 비선형으로 나타났으며, dual-mode sorption model로 만족스럽게 해석할 수 있었다. Langmuri capacity constant는 온도가 증가할수록 감소하였으며 유리전이온도 근처에서 영이 되며, 용해도 등온선은 유리 전이온도 이상에서는 직선으로 나타났다. Dual-mode sorption parameter의 온도 의존성도 고찰하였다.