• 대한화학회지
• /
• 제53권2호
• /
• pp.99-110
• /
• 2009

본 총설에서는 유리 전이에 관계되는 상태인 과냉각 액체와 유리의 특성, 그리고 유리 전이 관련 이론에 살펴보았다. 이 상태들은 비평형 상태로, 유리 전이는 일반적인 상전이와는 다르다. 유리와 관련 실 험 방법에 관하여 간략히 요약하였다.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.192-195
• /
• 2011

The phase transition of vortex matter from solid to liquid was studied in iron-based superconductors. Based on the traditional vortex glass theory, we have examined the magnetoresistivity data of iron-based superconductors using our extended thermal activation model: $\rho(B,T)=\rho((T-T_g(B))/(T_c(0)-T_g(B)))^{v(z-1)}$. We predict that the magnetic field-dependent area S + $S_0$ which integrates $\rho$ with T is proportional to $B^{\beta}$, where ${\beta}$ is the vortex glass transition exponent. From our calculation, the vortex glass transition exponent is 0.33, close to the exponent of area $S_0$ + S is 0.31 in $SmO_{0.9}F_{0.1}FeAs$; the exponent of area S is 0.63, which is close to the irreversibility line exponent 2/3. Both of the results show the validity of our model. In addition, our model is shown to be effective in describing irreversibility behavior in layered superconductors.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.265-268
• /
• 2004

In this present study, mechanical properties of the Zr-Ti-Cu-Ni-Be bulk metallic glass are characterized by compression test over a wide range of temperatures and strain rates. Three different types of deformation behavior have been identified as a result, viz., Newtonian viscous flow, non-Newtonian flow and brittle fracture without plastic deformation. A transition state theory is applicable fur the flow stress - strain rate curve that contains the transition from Newtonian to non-Newtonian flow. Based on the relationship between viscosity and strain rate within undercooled liquid state, we can easily obtain the experimental deformation map and suggest the boundaries among different deformation behavior of this alloy.

• Food Science and Biotechnology
• /
• 제14권2호
• /
• pp.301-303
• /
• 2005

State diagram of highly concentrated branched oligosaccharides (HBOS) was constructed to better understand phase behavior of mixtures with different size of oligosaccharides. It showed dramatic plasticizing effect on glass transition, which was successfully described based on Couchman-Karasz equation model. $T_g$' estimated from state diagram corresponded well with previous empirical data measured by maximum ice formation through isothermal holding (annealing) process. Estimated $T_g$' and $C_g$' values were $-36.3^{\circ}C$ and 79.99%, respectively. $T_g$' value of HBOS was approximately $10^{\circ}C$ higher than that of sucrose, while $C_g$' value was similar to those of general carbohydrate materials, which could be useful for applications in frozen system.

• 임산에너지
• /
• 제18권2호
• /
• pp.55-61
• /
• 1999

본 실험에서는 화학조성이 다른 일련의 에틸렌/초산비닐 공중합체의 점탄성(또는 화학조성)이 목재/고분자/목재 샌드위치 복합체의 진동·충격음 흡수성능에 미치는 영향을 검토하였다. 그 결과는 다음과 같다. 복합체의 진동·충격음 흡수성능은 고분자의 분자 운동상태에 민감하다. 즉, 복합체의 진동·충격음 흡수성능 고분자가 시험온도에 있어서 유리전이 상태일 때(대략 초산 비닐 55∼75%) 가장 크며, 고분자가 고무상태(초산비닐 47∼20%) 또는 유리상태(초산비닐 100∼87%)일 때는 작다. 또한 유리전이상태의 고분자 적층재는 약 6∼12dB의 충격음 저감효과가 있었다.

• 열처리공학회지
• /
• 제14권6호
• /
• pp.345-349
• /
• 2001

This study has investigated the effect of thermal stability and mechanical property of $Fe_{80-X}P_{10}C_6B_4M_X$(X=2, 4, 6, M=transition metal) amorphous alloys fabricated by the melt-spun process. The glass transition temperature($T_g$), crystallization temperature($T_x$) and hardness increase with decreasing electron concentration (e/a) from about 7.38 to 7.18. The decrease of e/a implies the increase in the attractive bonding state between the M elements and other constituent element. The decrease in a/e leads to the enhancement of the attractive bonding state among the constituent elements which is favorable for the increase in $T_g$, $T_x$ and hardness.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1179-1184
• /
• 1998

Mesogenic and azo monomers were synthesized and copolymerized to obtain two copolymers composed of methacrylate and itaconate backbone. Glass transition temperatures of the copolymers were found to be slightly higher than ambient temperature. Both the copolymers showed liquid crystalline properties. Trans-cis isomerization in film state was observed under UV-irradiation with a light of 365 nm. Regarding the photochemical phase transition behavior, the transition rate of nematic-to-isotropic state was slightly faster in the methacrylate copolymer during irradiation at 365 nm and the rate of the reverse transition was much faster in itaconate copolymer under thermal effect.

• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.445-450
• /
• 2024

The expansion of lithium-ion battery usage beyond portable electronic devices to electric vehicles and energy storage systems is driven by their high energy density and favorable cycle characteristics. Enhancing the stability and performance of these batteries involves exploring solid electrolytes as alternatives to liquid ones. While sulfide-based solid electrolytes have received significant attention for commercialization, research on amorphous-phase glass solid electrolytes in oxide-based systems remains limited. Here, we investigate the glass transition temperatures and sintering behaviors by changing the molecular ratio of Li₂O/B₂O₃ in borate glass comprising Li₂O-B₂O₃-Al₂O₃ system. The glass transition temperature is decreasing as increasing the amount of Li₂O. When we sintered at 450℃, just above the glass transition temperature, the samples did not consolidate well, while the proper sintered samples could be obtained under the higher temperature. We successfully obtained the borate glass ceramics phases by melt-quenching method, and the sintering characteristics are investigated. Future studies could explore optimizing ion conductivity through refining processing conditions, adjusting the glass former-to-modifier ratio, and incorporating additional Li salt to enhance the ionic conductivity.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.5-12
• /
• 2001

Our experimental research focuses on manipulating pinning deflects to alter the phase diagram of vortex matter, creating new vortex phases. Vortex matter offers a unique opportunity for creating and studying these novel phase transitions through precise control of thermal, pinning and elastic energies. The vortex melting transition in untwinned YB $a_2$C $u_3$ $O_{7-}$ $\delta$/ crystals is investigated in the presence of disorder induced by particle irradiation. We focus on the low disorder regime, where a glassy state and a lattice state can be realized in the same phase diagram. We follow the evolution of the first order vortex melting transition line into a continuous transition line as disorder is increased by irradiation. The transformation is marked by an upward shift in the lower critical point on the melting line. With columnar deflects induced by heavy ion irradiation, we find a second order Bose glass transition line separating the vortex liquid from a Bose glass below the lower critical point. Furthermore, we find an upper threshold of columnar defect concentration beyond which the lower critical point and the first order melting line disappear together. With point deflect clusters induced by proton irradiation, we find evidence for a continuous thermodynamic transition below the lower critical point..

• 유변학
• /
• 제11권1호
• /
• pp.9-17
• /
• 1999

본 연구에서는 페놀 수지/탄소섬유 복합재료가 상온에서부터 $400^{\circ}C$까지의 온도범위에서 유리 전이와 분해반응을 경험하면서 나타내는 점탄성 특징을 연구하였다. 가교 결합된 페놀메트릭스의 전형적인 유리전이에 따라 저장 탄성율(storage modulus)은 유리전이에 의하여 감소하였고 고무상태(rubbery state)에 도달함과 동시에 후경화 반응과 분해 반응 등을 포함하는 복합적인 고온반응에 의하여 증가하다가, 최대점을 보인 후 다시 감소하는 모습을 보였다. 유리전이 과정은 시간-온도 중첩원리에 따라 해석하였으나, 분해반응이 수반된 고온에서의 점탄성 특징은 저장 탄성율을 수직 및 수평 방향으로 이동시키어 마스터 커브를 완성 할 수 있었다. 이러한 실험적 결과를 토대로 아레니우스식과 Havriliak-Negami식에서 유추된 점탄성 모델을 이용하여 유리전이와 분해반응이 연속적으로 진행되는 과정을 정량적을 해석할 수 있었다. 이때의 완화시간은 유전이 과정을 통하여 감소하다가 고무상태에 이르러 최소값을 보여주고 이후로는 고온반응에 의하여 증가하는 모습을 보여주었다. 본 연구에서 제안된 점탄성 해석 방법은 반응이 수반된 열경화성 복합재료가 보여주는 점탄성 계수의 복잡한 거동을 온도와 주파수(frequency)에 따라 정확하게 묘사함으로서 이 모델링의 유용성을 증명 할 수 있었다.