• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.74-79
• /
• 2022

본 연구에서는 고강도 콘크리트 및 시멘트 복합체의 밀실한 내부 구조로 인한 급격한 내부 습도 저하 및 수화도 저하 등의 영향을 파악하고자 하였다. 내부 Si 수화도 변화 검증을 위해 폐유리발포비드를 경량골재로 사용하였으며, 중장기에 걸쳐 내부 미반응 수화물의 저감 및 수화물 형성 경향을 파악하였다. 폐유리발포비드는 5, 10, 20 % 혼입되었으며 프리웨팅하여 사용하였다. 폐유리발포비드의 혼입률이 증가함에 따라 강도는 감소하는 경향을 보였다. 이와 함께 XRD 분석, TGA 분석 및 Si NMR 분석을 통해 프리웨팅된 폐유리발포비드의 혼입량이 내부에 증가할 때, 페이스트에 수분이 공급되는 것으로 내부 Si의 수화 정도는 달라지는 것으로 판단된다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.151-154
• /
• 2008

The field emission lamps have the advantages to their cold cathode-characteristic and the eco-friendly, We realized that the dual emitter system showed very simple structure which gate and cathode electrodes are formed on the same glass surface. In this paper, we reported the properties of dual emitters depended on variation of gate width and spacing for optimum panel structure. In combination of dual emitter structure and bi-polar driving, electron beam spreads more than normal gate structure or diode structure, and emission uniformity increased in dual emitter structure at 5"-diagonal.

• Earthquakes and Structures
• /
• 제17권5호
• /
• pp.521-532
• /
• 2019

This paper describes the construction of a laminar box for simulating the earthquake response of soil and structures. The confinement of soil in the transverse direction does not rely on the laminar frame but is instead achieved by two acrylic glass walls. These walls allow the behaviour of soil during an earthquake to be directly observed in future study. The laminar box was used to study the response of soil with structure-footing-soil interaction (SFSI). A single degree-of-freedom (SDOF) structure and a rigid structure, both free standing on the soil, were utilised. The total mass and footing size of the SDOF and rigid structures were the same. The results show that SFSI considering the SDOF structure can affect the soil surface movements and acceleration of the soil at different depths. The acceleration developed at the footing of the SDOF structure is also different from the surface acceleration of free-field soil.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.505-518
• /
• 1997

The objective of this investigation was to compare the effects of water storage on the aspect of hardness and diametral tensile strengths of four hybrid glass ionomer cements(two compomers and two resin-reinforced glass ionomers) with a resin composite material. One composite resin(Degufill Ultra), two compomers(Dyract, Compoglass Cavifil), and two resin-reinforced glass ionomers(Fuji Duet, Vitremer) were used in this study. Cylindrical specimens were prepared and stored at $36{\pm}1^{\circ}C$ in distilled water for 10 minutes after set, and then tested on an Instron testing machine(No.4467) at 1.0 mm/min displacement rate. Vicker's hardness and diametral tensile strengths as time elapsed were measured after aging in water for 10 minutes, 1 hour, 3 hours, 1 day, 3 days, 5 days and 7 days at $36{\pm}1^{\circ}C$. During the test of diametral tensile strength, stress-strain curves were obtained, from which the compressive modulus were calculated and compared. The structure of four set glass ionomer cement mass was observed on SEM(Hitachi, S-2300) after being etched with 9.6% hydrofluoric acid for 1 minute. The results were as follows; 1. The hardness of the experimental group(compomer and the resin reinforced glass ionomer cement) did not exceed the value of control group(Degufill Ultra). 2. Vicker's hardness of the Fuji Duet tended to increase succeedingly, Dyract was decreased after 3 hours in water, and Vitremer was the lowest. 3. The control group(Degufill Ultra) presented progressively on increased diametral tensile strength with time, Fuji Duet were decreased after 3 days, Compoglass Cavifil and Vitremer were decreased after 5 days in water storage. 4. Compressive modulus of the control group(Degufill Ultra) and Dyract were increased sharply timely, Fuji Duet and Vitremer were increased smoothly by lapse of time in water. Fuji Duet were stronger than Vitremer. On the other hand, Vitremer exhibited the lowest toughness. 5. The microstructure of compomer was similar with that of the composite resin(Degufill Ultra), and the fillers in resin-reinforced glass ionomer cements were noticed. It can be concluded that mechanical properties of hybrid glass ionomer cements is weaker than composite resin, and that the compomers or the resin-reinforced glass ionomers can not substitute the composite resins. A plenty of considerations should be done on the application of them to the area under the loading and high wear has a little adverse effect on the mechanical properties on the water storage for 7 days. The further research should be needed to confirm the advantage of the compomer.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.191-199
• /
• 2023

We propose a dual Fabry-Perot interferometer (DFPI) structure that combines two Fabry-Perot interferometers. The structure is designed to have spectral peaks in the red, green, and blue regions simultaneously, to be applicable to R, G, and B subpixels without any patterning process. The optimized structure has been fabricated on a glass substrate using a thermal evaporation technique. When the DFPI structure was attached to the quantum-dot color-conversion layer, the full width at half maximum values of the green and red spectra decreased by 47.29% and 51.07% respectively. According to CIE 1931 color space, the DFPI showed a 37.66% wider color gamut than the standard RGB color coordinate. Thus it was experimentally proven that the proposed DFPI structure improved color purity. This DFPI structure will be useful in realizing a display with high color purity.

• 전기화학회지
• /
• 제24권3호
• /
• pp.52-64
• /
• 2021

Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y (x = 0.2, 0.5)계 유리에서 Fe doping과 BO₃ 치환이 유리 또는 결정화유리(glass-ceramics) 전해질의 구조적, 열적 및 전기적 특성에 미치는 영향을 조사하였다. 또한, Li_1.5Fe_0.5Ti_1.5(BO₃)₃ 유리분말을 소결하고, 소결 온도에 따른 결정상과 이온전도도 영향도 검토하였다. Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y 유리에서 Fe²⁺ 및 Fe³⁺ 이온은 network modifier로서 FeO₆ 팔면체를 형성하거나 network former로서 유리망목구조에 들어가 FeO₄ 유사 사면체를 형성하면서 유리의 구조를 변화시키는 것으로 확인되었다. 한편, BO₃는 BO₃ 또는 BO₄ 그룹을 형성하였는데, BO₃ 치환량이 작은 경우 boron은 (PB)O₄ 망목구조를 형성하지만, BO₃ 치환량이 증가하면 붕소이상현상(boric oxide anomaly)이 생겨나면서 BO₄는 BO₃로 변화하고 이로 인하여 비가교산소(non-bridging oxygen)가 증가하였다. BO₃ 치환은 유리전이온도와 결정화 온도를 낮추는 효과가 있으며, Fe 첨가량이 증가하면 Fe³⁺의 일부는 Fe²⁺로 환원되며, 유리전이온도와 연화온도를 낮아지게 하고 결정화온도를 높아지게 하는 것으로 확인되었다. Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y (x = 0.2, 0.5) 유리에서 BO₃ 함량이 증가함에 따라 이온전도도는 증가하였으며, x = 0.2 및 0.5에서 각각 8.85×10^-4 및 1.38×10^-4S/cm의 이온전도도값을 나타내었다. 본 연구에서 얻어진 높은 이온전도도는 Fe³⁺의 산화상태 변화와 붕소이상현상에 의한 BO₃ 생성 및 이로 인한 비가교산소의 생성에 기인한 것으로 생각된다. Li_1.5Fe_0.5Ti_1.5(BO₃)₃ 유리를 800℃에서 소결한 결과 이온전도도가 급격히 저하되었는데 이는 결정화유리 분말이 고온에서 유리화되었기 때문으로 생각된다. 따라서 유리분말을 800℃에서 소결한 후, 다시 460℃에서 조핵하고, 600℃에서 결정성장을 시킨 결과, 이온전도도가 열처리전과 동등 수준으로 회복되는 것을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.486-489
• /
• 2004

In this paper, we try to detect the peel out effect and find the strain difference between the main structure and retrofitting patch material when they separate from each other. In the experiment, two fiber optic Bragg grating sensors are applied to the main concrete structure and the patching material separately at the same position. The sensors show coincident behaviors at the initial loading, but different behaviors after a certain load. The test results show the possibility of optical fiber sensor monitoring of beam structures retrofitted by the composite patches.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.24-31
• /
• 1998

Interfacial effect in polymetric composites have been studied extensively. This report deals mainly with the effects of interfacial space charge and interface structure. A model for the dynamic process of interfacial space charge accumulation is proposed. The new model might interpret some interface phenomena which is difficult to be explained in terms of traditional Maxwell-Wagner theory. An interface structure is also presented, by which the importance of surface treatment of glass Fiber for improving the properties of FRP could be well understood.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.611-614
• /
• 2003

We have investigated electric field effect on the formation of phase separated composite organic film structure which is utilized by anisotropic phase separation from LC and prepolymer mixtures. Application of bias field resulted in a significant change in liquid crystal alignment between glass substrate and polymer layer. The liquid crystal molecules segregated into the inter-electrodes and formed twisted structure which is the result of imprinting of LC alignment by the bias field on polymer layers during polymerization process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1028-1029
• /
• 2003

The copolymerization of ethylene and norbornene was carried out with ansa-metallocene and modified methylaluminoxane (MMAO) cocatalyst. The copolymerization behavior was changed with the structure of metallocene catalysts. In addition the catalyst activity was dependent on the structure of MMAO, i.e.. MMAO-4 which contains less i-butyl group compared to MMAO-3A exhibited higher catalyst activity than MMAO-3A. The glass transition temperature and the composition of the produced copolymer were not affected by MMAO type.