• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.09a
• /
• pp.81-92
• /
• 2000

Green Slope(F.F.R : Fabric Form Reinforcement Method) is one of an environmental slope protection method at steep cutting sites. This method is that soil and rock at the steep slope is fixed using the environmental Fabric Form, Nail, Rock Bolt and Rock Anchor, And then, the surfaces covered with grasses or weeds. This method will be satisfied both safe slope protection and natural environment appearance. Green Slope is a useful method of the construction sites of steep cutting slopes.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.10b
• /
• pp.119-132
• /
• 1993

Modern construction of tunneis and large caverns in hard rock involves high technology design and construction methods. The use of sofisticated construction equipment is also an important part of a succesful completion. Since tunnels and caverns in hard rock often is situated in urban or sub-urban areas, the construction works have to be carried out under strict control as far as vibrations and other impacts on the environment is concerned. This paper will mainty discuss modern methods and equipment for the construction of large caverns.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1990.10a
• /
• pp.111-128
• /
• 1990

Three numerical analysis carried out for the design of a diaphragm wall were examined by the results of field observation data. Utilizing the wall stiffness, supporting system and construction sequence, the relative merits of those factors on the analysis of diaphragm wall have been investigated and their effects are compared tilth the observed behaviour of the wall. The predicted bending moment and wall displacement by elasto-plastic method agreed well with the observed values. The rigid slab supported system (i.e Top-Down Method) found to be the most effective way of controlling ground movement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.75-86
• /
• 1992

The elevation of reclamation work in the coastal area for the industrial complex is determined through the investigation and review of marine conditions, drainage plan and fill materials. The embankment to be constructed with crushed stone on the soft soil should be safe against the wave force, immediate and long term consolidation settlement, overturning and sliding due to self-weight and other forces. Because of lack of fill material from the borrow pit, the soft marine clay to be dredged shall be used as the reclamation material. And Paper Drain Board is used as the improvement method for the deep soft clay strata.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1210-1224
• /
• 2009

The present paper illustrates the outcome of the monitoring of the consolidation behavior of a soft foundation soil under a large submerged sand embankment. Measurements of settlements and excess pore water pressures showed a good agreement with predictions evaluated using the large strain consolidation theory. Soft soil improvement by means of deep mixing has been optimized. Moreover, the principles and developments of underwater geosynthetics applications are discussed.

• 기술발표회
• /
• s.2006
• /
• pp.235-247
• /
• 2006

A ground treatment work for Hongkong container terminal yard is reported as a case study of site formation work with full dredging and replacement method. Ground treatment work adopting surcharge and deep compaction (vibroflotation) were applied to improve the sand creep potential. The sand creep parameter of 0 25% was assumed in design stage and improved up to 0.05% and 0.02% after surcharge and deep compaction respectively

• Journal of the Korean Geophysical Society
• /
• v.8 no.4
• /
• pp.195-199
• /
• 2005

현재로서는 인발저항 메카니즘에 많은 불확실성들 즉, 구속된 조건에서의 다일레이션, 인발저항영역, Transition zone의 존재, Debonding 메카니즘, Boundary condition등 이 내포되어있어, 아직까지 확립된 이론이 존재하지 않는다. 인발저항력 추정을 위해 그 동안 수많은 시도와 노력이 있었음에도 불구하고, 현장 인발시험이 현재 지반설계에 가장 적합한 방법으로 지금까지 통용되고 있는 실정이다. 쏘일네일설계시 요구되는 몇가지 중요한 문제들을 제기하고 그에 대한 나름대로의 해석과 결론을 제시하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.03a
• /
• pp.31-42
• /
• 1994

In this paper, a case study was presented to analyze the lateral movement of abutment founded on the soft soil with steel pile foundations and was to propose its remedial methods. The main reason for the displacement was due to the lack of the lateral bearing capacity of piles and even more seriously the lateral movement of the soil arising from the construction of as embankment behind the abutment. This project showed that the passive state as well as the active state of piles must be considered for the proper design of abutment foundations.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10a
• /
• pp.65-94
• /
• 2001

The use of PBD(prefabricated band drain)far ground improvement is rapidly increased due to the merit of construction period and cost, environmental preservation compared with other vertical drain method, and the development of material. This paper presents the historical review, theoretical background, design procedure and method, and typical construction example for the PBD. Also, the direction of further technical development and study is recommended.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.27-43
• /
• 2002

This paper described two case studies on large scale failure of cutting slope. The kind of rock in both sites predominated limestone and shale respectively. These cutting slopes located in northern area of Gyongbug Province are composed of very complicated and various rock mass. Geological characteristics, causes of failure, proceeding of security diagnose, maintenance method etc. of two sites were carried out to check the cutting slope stability and to provide reasonable maintenance method. This paper may provide the useful data for engineers related with design and construction of large cutting slope.