• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1195-1207
• /
• 2020

With the development of GeoWeb technology, 2D/3D spatial information services through the web are also has been used increasingly in the application of disaster management. This paper is suggested to construct a web-based 3D geo-spatial information mapping platform to visualize various spatial information collected at the disaster site in a web environment. This paper is presented a web-based geo-spatial information mapping service plan for the various types of 2D/3D spatial data and large-volume LiDAR point cloud data collected at the disaster accident site using HTML5/WebGL, web development standard technology and open source. Firstly, the collected disaster site survey 2D data is constructed as a spatial DB using GeoServer's WMS service and PostGIS provided an open source and rendered in a web environment. Secondly, in order to efficiently render large-capacity 3D point cloud data in a web environment, a Potree algorithm is applied to simplifies point cloud data into 2D tiles using a multi-resolution octree structure. Lastly, OpenLayers3 based 3D web mapping pilot system is developed for web visualization of 2D/3D spatial information by implementing basic and application functions for controlling and measuring 3D maps with Graphic User Interface (GUI). For the further research, it is expected that various 2D survey data and various spatial image information of a disaster site can be used for scientific investigation and analysis of disaster accidents by overlaying and visualizing them on a built web-based 3D geo-spatial information system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.97-104
• /
• 2018

Recently, many studies have examined UAVs (unmanned aerial vehicles), which can replace and supplement existing surveying sensors, systems, and images. This study focused on the use of UAV images and assessed the possibility of utilization in areas where it is difficult to obtain GCPs (ground control points), such as disasters. Therefore, 3D (dimensional) pointcloud data were generated using UAV images and the absolute/relative accuracy of the generated model data using GCPs and without GCPs was assessed. The results showed the 3D shape pointcloud generated by UAV image matching was proven if the relative accuracy was set, regardless of whether GCPs were used or not; the quantitative measurement error rate was within 1%. Even if the absolute accuracy was low, the 3D shape pointcloud that had been post processed quickly was sufficient to be utilized when it is impossible to acquire GCPs or urgent analysis is required. In particular, the results can obtain quantitative measurements and meaningful data, such as the length and area, even in cases with the ground reference point surveying and post-process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.592-597
• /
• 2020

Currently, river survey data is mainly performed by acquiring longitudinal and cross-sectional data of rivers using total stations or the GNSS(Global Navigation Satellite System). There is not much research that addresses the use of LiDAR(Light Detection and Ranging)systems for surveying rivers. This study evaluates the applicability of using LiDAR data for surveying rivers The Ministry of Land, Infrastructure and Transport recently launched a drone-based river fluctuation survey. Pilot survey projects were conducted in major rivers nationwide. Studies related to river surveying were performed using the ground LiDAR(Light Detection And Ranging)system.Accuracy was ensured by extracting the linearity of the object and comparing it with the total station survey performance. Data on trees and other features were extracted to generate three-dimensional geospatial information for the point-cloud data on the ground.Deviations were 0.008~0.048m. and compared with the results of surveying GNSS and the use of drone LiDAR data. Drone LiDAR provided accurate three-dimensional spatial information on the entire target area. It was able to reduce the shaded area caused by the lack of surveying results of the target area. Analyses such as those of area and slope of the target sites are possible. Uses of drones may therefore be anticipated for terrain analyses in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.3-12
• /
• 2004

It is necessary to manage water resources in rural areas in order to achieve proper development of new water resources, sustainable usage and reasonable distribution. This paper aims to analyze multi-temporal Landsat-7 ETM+data for soil moisture that is essential for crops in Ahnsung area. The ETM data was also fused with KOMPSAT-1 images in order to be used as backdrop watershed maps at first. Multi-temporal Images showed also the characteristics of soil moisture distribution. Images taken in April showed that rice paddy had as low reflectance as artificial features. Compared with April scenes, those taken in Hay and June showed wetness index increased in the rice paddies. The mountainous areas have almost constant moisture index, so the difference between the dates was very low while reservoirs and livers had dramatic changes. We can calculate total potential areas of distribution of moisture content within the basin and estimate the areas being sensitive to drought. Finally we can point out the sites of small rice paddies lack of water and visualize their distribution within the same basin. It can be said that multi-temporal Landsat-7 ETM+ and KOMPSAT data can be used to show broad drought with quick and simple analysis. Drought sensitiveness maps may enable the decision makers on rural water to evaluate the risk of drought and to measure mitigation, accompanied with proper data on the hydrological and climatic drought.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.111-126
• /
• 2017

Small-scale UAS(Fusion technique of Unmanned Aerial Vehicles platform and Sensors, 'sUAS') opens various new applications in construction fields and so becoming progressively common due to the considerable potentials in terms of accuracy, costs and abilities. The purpose of this study is that the investigation of the validation on the utilization of sUAS for earth stockpile volume calculations on sites. For this, generate 3D models(DSM) with sUAS aerial images on an cone shaped soil stockpile approximately $270m{\times}300m{\times}20m$, which located at Baegot Life Park in Siheung-si, compared stockpile volume estimates produced by sUAS image analysis, against volume estimates obtained by GNSS Network-RTK ground surveying method which selected as the criteria of earth stockpile volume. The result through comparison and examination show(demonstrate) that there was under 2% difference between the volume calculated with the GNSS Network RTK data and the sUAV data, especially sUAS imaged-based volume estimate of a stockpile can be greatly simplified, done quickly, and very cost effective over conventional terrestrial survey methods. Therefore, with consideration of various plan to assess the height of vegetation, sUAS image-based application expected very useful both volume estimate and 3D geospatial information extraction in small and medium-sized sites.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2017

Many studies have been implemented to manage solar plant being supplied widely in recent years. This study analyzed heat emission of solar cell using unmanned aerial vehicle(UAV)-based thermal infrared sensor, and major conclusions are as belows. Firstly, orthomosaic image and digital surface model(DSM) data were acquired using UAV-based RGB sensor, and solar light module layer necessary to analyze the heat emission of solar cell was constructed by these data. Also as a result of horizontal error into validation points using virtual reference service(VRS) survey for evaluating the location accuracy of solar light module layer, higher location accuracy could be acquired like standard error of $dx={\pm}2.4cm$ and $dy={\pm}3.2cm$. And this study installed rubber patch to test the heat emission of solar cell and could analyzed efficiently the location of rubber patch being emitted heat using UAV-based thermal infrared sensor. Also standard error showd as ${\pm}3.5%$ in analysis between calculated cell ratio by rubber patch and analyzed cell ratio by UAV-based thermal infrared sensor. Therefore, it could be efficiently analyzed to heat emission of solar cell using UAV-based thermal infrared sensor. Also efficient maintenance of solar plant could be possible through extracting the code of solar light module being emitted of heat automatically.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.105-117
• /
• 1998

The main object of this study was to prove the effectiveness of satellite Image data for extraction of the pine needle gall midge damaged area in the part of Kangwon-do area, and to present the detailed procedure of a digital image processing for extraction of those damaged area. The effectiveness of extraction of damaged area was improved by using the BRCT(Backwards Radiance Correction Transformation) with DEM for the normalization of topographic effects. The topographic surface analysis of the extracted damaged area revealed that the general damaged area was at south-west and south-east aspect with the slope of 31 to 38 degrees, the temperature of 21 to 25, and 23% to 39% of the highest altitude mountains. The new damaged area in which expanded area was at 27 to 30 degree of slope, the aspect of 46 to 180 degrees, the temperature of $11^{\circ}C\;to\;12^{\circ}C$ and 27% to 39% of the highest altitude mountains. The NDI(New Damaged Index) was developed using the environment factor and simple vegetation index.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.69-78
• /
• 2004

Since 1995, One of the NGIS(National Geographic Information System) projects, the underground utilities project, has been finished in 2003. The 19 cities in korea for this project will use underground utilities management system using underground utilities database focusing on water and sewage system. However, special expert, technical and experience problem in computer environment has not been had in working department for water and sewage management and maintenance for each local government. The management and maintenance by underground utilities database by manual method is getting lowered a data qualify of underground utilities database because of the data omitting, error in writing and securing of the lasted database. Therefore, in this study, Application test for field workers using a mobile tool and environment analysis of wireless communication in Korea and application test of GPS receiver for mobile tools had been processed and made a mobile working environment. The efficient management and maintenance method for underground utilities database has been developed an off-line method for modification and update of database about general work which has a high working frequency because of the limitation of wireless communication environment. Also, the emergency working has been applied for on-line method.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.87-93
• /
• 2007

Over the years, Advanced Public Transportation System (APTS) has been implemented to manage and operate public transportation system. With the expanding mass spatio-temporal data such as comprehensive spatial information of each individual passenger and public transportation vehicle, it has been required to consolidate and analyze these multiple data sets from various sources. This paper demonstrates how GIS is utilized for the consolidation of massive transit related spatio-temporal information. And it presents effective applications to improve transit planning process and support transit related decision-making activities. GIS based system is used to combine multi-agents' data in the areas of transit operation and individual transit ride and transfer management. Due to the unique comprehensiveness and the level of detail of the data provide by the Seoul Transit system, this GIS based information consolidation is the first in its class. Based on the integrated database, this paper describes the effective and efficient GIS based analysis deployed in a transportation system planning process. The data integration systems and analytic models developed in this paper can be transferred and applied by any municipal governments provided that the appropriate data is available.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.71-83
• /
• 2013

Recently frequencies and scales in natural disasters have been significantly increased and enlarged and that leads to increase interests on preventing disasters. As natural disasters occur, it is difficult to fulfill the scale of natural disasters using ordinary stocks in a local government. Thus, it is necessary to establish a system that commonly uses protection resources according to regional characteristics in order to rapidly implement labor mobilization and equipment distribution based on the damage of natural disasters. In this study, regional characteristics in Korea provinces are analyzed and 'a way of composing a local government consortium for common disaster responses' is proposed. First, a disaster map that represents the amount of damage for each local government published in the disaster yearbook from 2002 to 2011 is produced using GIS. Then, the whole land is divided into five different sections according to administrative regions and that are divided into 12 clusters again based on the geographical and humanistic characteristics and the analysis of the scale of damage in typhoons and heavy rainfalls. Finally, disaster protection base stations for each region are selected. The data of analyzing disaster damages may be used as a reference material for establishing disaster prevention plans.