• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.3
• /
• pp.238-248
• /
• 1988

The flow pattern inside the power condenser is generally known to be very complicated due to the phase change and turbulence effects as well as the effect of condenser geometry. In the present study, the flow pattern inside the power condenser was numerically simulated with a personal computer. The widely known CHAMPION 2/E/FIX(Concentration, Heat and Momentum Program Instruction Outfit, 2D/Elliptic/Fixed grid) computer code was modified for this purpose. The flow was asssumed to be two-dimensional and steady-state, and the tube bank was considered to be homogeneous porous medium. Simple turbulent diffusion coefficients based on the appropriate experiments were obtained for the computation. Through this analytical approach, the flow pattern could be predicted fairly well. The computational results also show that the location of the air vent plays an important key role in determining the efficiency of the condenser.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.505-514
• /
• 1998

Flow pattern of air-water two phase flow depends on the conditions of pressure void fraction and channel geometry. We classify the flow pattern by measuring the output signal of the conductivity probe. under the classified flow pattern we mount a visualization equipment on the test section and take pictures. We vary the concentration of pure solvent and polymer to measure local void fraction. We know that the maximum point position of local void fraction distribution move from the center of the pipe to the wall of the pipe as JSL increase when JSA is constant in two phase flow. But we find that the maximum point position of local void friction move from the wal of the pipe to the center of the pipe when polymer concentration increase.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.139-146
• /
• 2004

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behavior of the materials during indentation scratch test was studied with numerical method by ABAQUS S/W. Brittle materials (Si, Pyrex glass 7740) were used as specimens, and forming conditions to reduce the elastic recovery and pile-up were proposed. The indenter was modeled as a rigid surface. Minimum mesh sizes of specimens are 1-l0nm. Variables of the nanoindentation scratch test analysis are scratching speed, scratching load, tip radius and tip geometry. The nano-indentation scratch tests were performed by using the Berkovich pyramidal diamond indenter. Comparison between the experimental data and numerical result demonstrated that the FEM approach can be a good model of the nanoindentation scratch test. The result of the investigation will be applied to the fabrication of the hyper-fine pattern.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.663-673
• /
• 2007

This paper presents a new moving obstacle detection method using an optical flow in mobile robot with an omnidirectional camera. Because an omnidirectional camera consists of a nonlinear mirror and CCD camera, the optical flow pattern in omnidirectional image is different from the pattern in perspective camera. The geometry characteristic of an omnidirectional camera has influence on the optical flow in omnidirectional image. When a mobile robot with an omnidirectional camera moves, the optical flow is not only theoretically calculated in omnidirectional image, but also investigated in omnidirectional and panoramic images. In this paper, the panoramic image is generalized from an omnidirectional image using the geometry of an omnidirectional camera. In particular, Focus of expansion (FOE) and focus of contraction (FOC) vectors are defined from the estimated optical flow in omnidirectional and panoramic images. FOE and FOC vectors are used as reference vectors for the relative evaluation of optical flow. The moving obstacle is turned out through the relative evaluation of optical flows. The proposed algorithm is tested in four motions of a mobile robot including straight forward, left turn, right turn and rotation. The effectiveness of the proposed method is shown by the experimental results.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.147-152
• /
• 2007

Face detection is a crucial part of the face recognition system. It determines the performance of the whole recognition system. Hausdorff distance metric has been used in face detection and recognition with good results. It defines the distance metric based only on the geometric similarity between two sets or points. However, not only the geometry but also the local patterns around the points are available in most cases. In this paper a new Hausdorff distance measure is proposed that makes hybrid use of the similarity of the geometry and the local patterns around the points. Several experiments shows that the new method outperforms the conventional method.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.69-80
• /
• 2015

A series of numerical analyses was conducted to predict the thermal performance of a solar air heater depending on the hole configuration and geometry in the absorber plate. The planar dimensions of the prototype were 1 m (W) by 1.6 m (H), and the maximum air flow considered was $187m^3/h$. It was considered that protruding holes with a triangular opening in the absorber plate would invoke turbulence in the air flow to enhance the convection heat transfer. Six different hole configurations were investigated and compared with each other, while the hole opening height was considered as a design variable. Three-dimensional transient analyses were performed with a commercial software package on the airflow and heat transfer in the model. The numerical results were analyzed and compared from the view point of the outlet air temperature and its time response to derive the optimal hole pattern and hole opening height.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1053-1060
• /
• 2011

This study is performed to determine the drug concentration profiles of drug-eluting stents (DES) for an ideal circular ring stent and intertwined stent models for various Reynolds numbers (Re = 200, 400, and 800). The Navier.Stokes equations coupled with the advection-diffusion equation are solved numerically in order to determine how the flow patterns and drug deposition are affected in the in-stent and post-stent regions where flow separation and recirculation occur. The presence of DES within the arterial segment affects the local drug distribution in the flow field. As a result, the drug concentration for the intertwined stent is higher over the in-stent region in comparison with the ideal stents. For a given stent geometry, the local drug concentration in the in-stent region decreases with Reynolds number, while for a given Reynolds number, the local drug concentration is relatively insensitive to the stent geometry. The results show that drug concentration along the arterial wall is significantly higher within the in-stent and post-stent regions for the intertwined stent geometry than for the ideal stent geometries.

• Journal of the Korean housing association
• /
• v.13 no.5
• /
• pp.43-50
• /
• 2002

The purpose of this study is to find the types and symbolic meanings of the pattern shown in the Korean traditional houses. The major findings were as follows, 1) The patterns shown in the Korean traditional houses are classified into the types of the animal, plant, good-luck geometry according to the Motifes 2) The patterns of the Korean traditional houses were expressed in the fences, gates, chimneies, walls, windows and doors, railings, roofs. 3) Korean traditional patterns are expressed the meanings of the protection, long life, good-luck, good meaning, decoration in the fences, gates, chimneies, walls, windows and doors, railings, roofs.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.89-97
• /
• 2011

Furniture design is no exception to human desire for pursuit of the nature. In various design fields, it has turned out nature-decorative method in the past, and also recently it has turned out bio-adaptive method which is more root design process using principal of generation in nature world. The purpose of this study is to analyze application methods and characteristics of fractal geometry and voronoi diagram which are most representative principals of generative design in nature by research on the example of furniture design using these principals. The results of having analyzed fumitures by generative design can be summarized as follows; design principals of fractal; superposition, scaling, repetition & gradation, deformation, distortion and voronoi diagram; individual speciation, variational patten, repetition gradation, ambiguous boundary create new design concept and emergent form in furniture design. Application methods are 'form emergence by algorithm', 'conventional process based on principals of generative design', and 'reproduction of pattern from generative design'. Biological reinterpretations and new explorations of principals of nature generation offer unbounded possibilities for furniture design.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.17-31
• /
• 2003

$Premi\grave{e}re$ Vision is a leading textile collection held since 1973. In this study, textiles for 2004/05 F/W season in $Premi\grave{e}re$ Vision were analyzed at the various point of view, such as general trend, sub-theme, fiber content, color trend, structure, yarn trend, pattern, texture, decoration, finishing and other technical treatment, and functionality. There were three general trends; natural/ecology, geometry, and combination. Natural color and texture were widely used over the fabric exhibited, and irregularities expressed the natural trend of textiles. Geometric patterns were used for knit as well as for woven. Geometry expressed by various methods such as weaving, knitting, printing, shearing, embossing, and etc. However, geometry shown in this season was not a clear form expressed by weaving, but a blurry, irregular form expressed by various other methods such as knitting. The combination among heterogeneous fibers, yarns, colors, images, and textures was usual, however, the harmony among them was accomplished.