• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.296-303
• /
• 1996

This paper proposes a method for shape optimization of trusses. The potential savings offered by shape optimization will certainly be more significant than those resulting from fixed-geometry optimization. On the other hand, difficulties associated with topology and geometry optimization are still in existence. Even with a known topology, the geometry optimization problem is still a difficult task. An evolutionary procedure to be adopted and improved in this work, however, offers a means to achieve optimization in topology and geometry together. A plane truss structure is modelled within a specified domain and made to include a great number of nodes and members. Then the structure is analyzed and those members with stresses below a certain level are progressively eliminated from the structural system In this manner the structure evolves into a truss with a better topology and geometry by removing less important parts. Through the worked examples, we can see that the method presented in this Paper shows much promise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.870-875
• /
• 2004

Beam stiffeners have frequently been used for raising natural frequencies of base structures. In stiffener layout optimization problems, most of the previous researches considering the position and/or the length of the stiffener as design variables dealt with structures having just simple convex shapes such as a square or rectangle. The reason is concave shape structures have difficulties ill formulating geometry constraints. In this paper, a new geometry constraint handling technique, which can define both convex and concave feasible lesions and measure a degree of geometry constraint violation, is proposed. Evolution strategies (ESs) is utilized as an optimization tool. In addition, the constraint-handling technique of EVOSLINOC (EVOlution Strategy for scalar optimization with Lineal and Nonlinear Constraints) is utilized to solve constrained optimization problems. From a numerical example, the proposed geometry constraint handling technique is verified and proves that the technique can easily be applied to structures in net only convex but also concave shapes, even with a protrusion or interior holes.

• Structural Engineering and Mechanics
• /
• 제46권3호
• /
• pp.403-416
• /
• 2013

This paper describes new optimization strategy that offers significant improvements in performance over existing methods for geometry design of frame structures. In this study, an imperialist competitive algorithm (ICA) and ant colony optimization (ACO) are combined to reach to an efficient algorithm, called Imperialist Competitive Ant Colony Optimization (ICACO). The ICACO applies the ICA for global optimization and the ACO for local search. The results of optimal geometry for three benchmark examples of frame structures, demonstrate the effectiveness and robustness of the new method presented in this work. The results indicate that the new technique has a powerful search strategies due to the modifications made in search module of ICACO. Higher rate of convergence is the superiority of the presented algorithm in comparison with the conventional mathematical methods and non hybrid heuristic methods such as ICA and particle swarm optimization (PSO).

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.67-72
• /
• 2010

In this paper, a design optimization of ball grid array packaging geometry is studied based on the Taguchi method, which allowed robust design by considering the variance of the input parameters during the optimization process. Molding compound and substrate were modeled as viscoelastic, and finite element analyses were performed to calculate the strain energy densities of the eutectic solder balls. Six quality factors of the dimensions of the packaging geometry were chosen as control factors. After performing noise experiments to determine the dominant factors, main experiments were conducted to find the optimum packaging geometry. Then the strain energy densities between the original and optimized geometries were compared. It was found that the effects of the packaging geometry on the solder ball reliability were significant, and more than 40% of the strain energy density was reduced by the geometry optimization.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.954-957
• /
• 2004

Based on the authors' previous work, where a geometric constraint handling technique for stiffener layout optimization problem using geometry algorithms was proposed, stiffener layout optimization to maximize natural frequencies of a curved three-dimensional shell structure was performed with a projection method. The original geometry of the shell structure was first projected on a two-dimensional plane, and then the whole optimization process was performed with the projected geometry of the shell except that the original shell structure was used for the eigenproblem solving. The projection method can be applied to baseline structures with a one-to-one correspondence between original and projected geometries such as automobile hoods and roofs.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.21-27
• /
• 2022

The rotorcraft engine gearbox transmits the power generated by the turboshaft engine to the rotor by reducing the rotational speed and increasing the torque. The core of the rotorcraft engine gearbox is lightweight performance, which requires maximum weight reduction within the range that meets various requirements and constraints. Therefore, lightweight design through gear macro geometry optimization is necessary. In this study, gear macro geometry optimization was performed to reduce the weight of a rotorcraft engine gearbox. NSGA-III was used for the optimization, resulting in a combination of the gear ratio and macro geometry that minimizes the weight of the total gear. In addition, the safety factor of the gears satisfied the given conditions.

• Structural Engineering and Mechanics
• /
• 제70권3호
• /
• pp.367-380
• /
• 2019

The paper concerns topology and geometry optimization of statically determinate beams with arbitrary number of supports. The optimization problem is treated as a bi-criteria one, with the objectives of minimizing the absolute maximum bending moment and the maximum deflection for a uniform gravity load. The problem is formulated and solved using the Pareto optimality concept and the lexicographic ordering of the objectives. The non-dominated sorting genetic algorithm NSGA-II and the local search method are used for the optimization in the Pareto sense, whereas the genetic algorithm and the exhaustive search method for the lexicographic optimization. Trade-offs between objectives are examined and sets of Pareto-optimal solutions are provided for different topologies. Lexicographically optimal beams are found assuming that the maximum moment is a more important criterion. Exact formulas for locations and values of the maximum deflection are given for all lexicographically optimal beams of any topology and any number of supports. Topologies with lexicographically optimal geometries are classified into equivalence classes, and specific features of these classes are discussed. A qualitative principle of the division of topologies equivalent in terms of the maximum moment into topologies better and worse in terms of the maximum deflection is found.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.392-399
• /
• 2009

The paper concerns the description of the step by step development process of the new fixed blade runner called "Mixer" suitable for the uprating of the Francis turbines units installed at the older low head hydropower plants. In the paper the details of hydraulic and mechanical design are presented. Since the rotational speed of the new runner is significantly higher then the rotational speed of the original Francis one, the direct coupling of the turbine to the generator can be applied. The maximum efficiency at prescribed operational point was reached by the geometry optimization of two most important components. In the first step the optimization of the draft tube geometry was carried out. The condition for the draft tube geometry optimization was to design the new geometry of the draft tube within the original bad draft tube shape without any extensive civil works. The runner blade geometry optimization was carried out on the runner coupled with the draft tube domain. The blade geometry of the runner was optimized using automatic direct search optimization procedure. The method used for the objective function minimum search is a kind of the Nelder-Mead simplex method. The objective function concerns efficiency, required net head and cavitation features. After successful hydraulic design the modal and stress analysis was carried out on the prototype scale runner. The static pressure distribution from flow simulation was used as a load condition. The modal analysis in air and in water was carried out and the results were compared. The final runner was manufactured in model scale and it is going to be tested in hydraulic laboratory. Since the turbine with the fixed blade runner does not allow double regulation like in case of full Kaplan turbine, it can be profitably used mainly at power plants with smaller changes of operational conditions or in case with more units installed. The advantages are simple manufacturing, installation and therefore lower expenses and short delivery time for turbine uprating.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.103-110
• /
• 2017

본 논문에서는 StrAuto를 이용하여 구조물의 형상 변경을 통한 대안을 생성하고, 이에 대한 최적화를 수행하는 과정을 상세하게 다루었다. 비정형 대공간 전시장 구조물을 대상으로 전체 형상을 파라메트릭하게 디자인하고, 가장 폭이 넓은 경간의 구조 형상을 변경하면서 물량 변화를 관측하여 최적안을 도출하였다. 기존 연구들에서는 형상 변경의 제약 때문에 대부분 단면과 물성을 통한 최적화를 수행하는데 그쳤으나, 본 연구에서는 형상 변경이 가능한 부분을 찾아내어 StrAuto의 가장 핵심적인 능력인 형상 변경을 통한 최적화를 수행했다는 점에서 중요한 의미를 지닌다. 형상 변경으로 충분한 여유를 확보하고 단면 최적화로 물량을 줄이는 프로세스를 통해, 대공간 구조물의 일부만을 대상으로 하면서도 전체 물량의 11.7%를 줄일 수 있었다.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.17-22
• /
• 2021

The shape of the blank greatly affects the formability and quality of the product after the stamping process. In this study, the geometry of the B-Pillar blank in the stamping process was optimized using design of experiments. The geometry of the blank for the B-pillar was simplified with the two length values and two radius values. The effects of design variables were studied through the Design of experiments. The stamping process of the B-pillar was predicted with the Finite Element Analysis (FEA). The optimized blank geometry was obtained. It results in the reduced maximum equivalent plastic strain. The local necking and the wrinkling did not occurred with the optimized blank geometry.