• 한국전산유체공학회지
• /
• 제12권2호
• /
• pp.1-7
• /
• 2007

To develop an aerodynamic performance, two groups of studies have been achieved widely. One is about the geometric design of vehicles and the other is about aerodynamic devices. Geometric design is a credible and stable method. However, it is not flexible and each part is related interactively. Therefore, if one part of geometry is modified, the other part will be required to redesign. On the other hand, the flow control by aerodynamic devices is flexible and modulized method. Even though it needs some energy, a relatively small amount of input makes more advanced aerodynamic performance. Synthetic jet is one of the method in the second group. The device repeats suctions and blowing motions in constant frequency. According to the performance, the adjacent flow to flight surface are served momentum. This mechanism can reduce the aerodynamic loss of boundary layer and separated flow. A synthetic jet actuator has several parameters, which influences the flow control. This study focuses on the parameter effects of synthetic jet - orifice geometry, frequency, jet speed and etc.

• 방송공학회논문지
• /
• 제27권6호
• /
• pp.861-871
• /
• 2022

실사 및 컴퓨터 그래픽을 표현하는 다수의 몰입형 영상을 효율적으로 부호화하는 표준으로 moving picture experts group (MPEG)에서는 MPEG immersive video (MIV) 표준을 개발하였다. MIV 표준은 다수의 몰입형 영상을 압축하여 다수의 출력 영상인 아틀라스를 생성하나, 다수의 아틀라스를 부호화 후 복호화 시 저사양 장비에서 복호기 간 동기화 문제가 발생할 수 있다. 본 논문은 저사양 및 고사양 장비에 모두 대응하여 적응적 복호기 개수 조절을 위한 geometry packing 기법을 제안하고 구현한다. 제안하는 방법은 MIV의 최신 참조 소프트웨어에서 문제없이 동작함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.301-302
• /
• 2006

In this paper, the possibilities of the Infra-red sensor in sensing and control of the bead geometry in the automated welding process are presented. Infra-red sensor is a well-known method to deal with the problems with a high degree of fuzziness so that the sensor is employed to build the relationship between process variables and the quality characteristic the proposed above respectively. Based on several neural networks, the mathematical models are derived from extensive experiments with different welding parameters and complex geometrical features. The developed system enables to select the optimal welding parameters and control the desired weld dimensions during arc welding process.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.983-1001
• /
• 2017

The extent by which economy and safety concerns can be addressed in earth retaining structure design depends on the accuracy of the assumed failure surface. Accordingly, this study attempts to investigate and quantify mechanical backfill properties that control failure surface geometry of cohesionless backfills at the active state for translational mode of wall movements. For this purpose, a small scale 1 g physical model study was conducted. The experimental setup simulated the conditions of a backfill behind a laterally translating vertical retaining wall in plane strain conditions. To monitor the influence of dilative behavior on failure surface geometry, model tests were conducted on backfills with different densities corresponding to different dilation angles. Failure surface geometries were identified using particle image velocimetry (PIV) method. Friction and dilation angles of the backfill are calculated as functions of failure stress state and relative density of the backfill using a well-known empirical equation, making it possible to quantify the influence of dilation angle on failure surface geometry. As a result, an empirical equation is proposed to predict active failure surface geometry for cohesionless backfills based on peak dilatancy angle. It is shown that the failure surface geometries calculated using the proposed equation are in good agreement with the identified failure surfaces.

• International Journal of Korean Welding Society
• /
• 제1권1호
• /
• pp.23-30
• /
• 2001

Among the various welding conditions, the welding current that is inversely proportional to the tip-to-work-piece distance is an essential parameter as to monitor the GMAW process and to implement the welding automation. Considering the weld pool surface geometry including weld defects, it should modify the signal processing method for automatic seam tracking in horizontal fillet welding. To meet the above necessities, a mathematical model related with the weld pool geometry was proposed as in a conjunction with the two-dimensional heat flow analysis of the horizontal fillet welding. The signal processing method based on the artificial neural network (Adaptive Resonance Theory) was proposed for discriminating the sound weld pool surface from that with the weld defects. The reliability of the numerical model and the signal processing method proposed were evaluated through the experiments of which showed that they are effective for predicting the weld bead shape with or without the weld defects in a horizontal fillet welding.

• Steel and Composite Structures
• /
• 제37권6호
• /
• pp.663-678
• /
• 2020

This paper proposes a novel topology optimization method generating multiple materials for external linear plane crack structures based on the combination of IsoGeometric Analysis (IGA) and eXtended Finite Element Method (X-FEM). A so-called eXtended IsoGeometric Analysis (X-IGA) is derived for a mechanical description of a strong discontinuity state's continuous boundaries through the inherited special properties of X-FEM. In X-IGA, control points and patches play the same role with nodes and sub-domains in the finite element method. While being similar to X-FEM, enrichment functions are added to finite element approximation without any mesh generation. The geometry of structures based on basic functions of Non-Uniform Rational B-Splines (NURBS) provides accurate and reliable results. Moreover, the basis function to define the geometry becomes a systematic p-refinement to control the field approximation order without altering the geometry or its parameterization. The accuracy of analytical solutions of X-IGA for the crack problem, which is superior to a conventional X-FEM, guarantees the reliability of the optimal multi-material retrofitting against external cracks through using topology optimization. Topology optimization is applied to the minimal compliance design of two-dimensional plane linear cracked structures retrofitted by multiple distinct materials to prevent the propagation of the present crack pattern. The alternating active-phase algorithm with optimality criteria-based algorithms is employed to update design variables of element densities. Numerical results under different lengths, positions, and angles of given cracks verify the proposed method's efficiency and feasibility in using X-IGA compared to a conventional X-FEM.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권2호
• /
• pp.62-67
• /
• 2000

The uniformity of temperature on a wafer is one of the most important parameters to control the RTP (Rapid Thermal Process) with proper input signals. Since it is impossible to achieve the uniformity of temperature without exact estimation of temperature at all points on the wafer, the difficulty of understanding internal dynamics and structural complexities of the RTP is a primary obstacle to accurately measure the distributed temperatures on the wafer. Furthermore, it is also hard to accomplish desirable estimation because only few pyrometers have been commonly available in the general equipments. In the paper, a thermal model based on the chamber geometry of the AST SHS200 RTP system is developed to effectively control the thermal uniformity on the wafer. First of all, the estimation method of one-point measurement is developed, which is properly extended to the case of multi-point measurements. This thermal model is validated through certain simulation and experiments. The work can be usefully contributed to building a run-by-run or a real-time controls of the RTP.

• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.233-239
• /
• 2007

본 연구의 주요 목적은 시멘트 복합 재료의 소성 수축 균열 제어에 폐 PET병으로부터 만들어진 재생 PET 섬유의 효과를 평가하는 것이다. PET은 플라스틱 재료라 알려진 재료로 음료수 병 등에 다양하게 적용되어 왔다. 그렇지만 폐 PET 병은 사용 후에 환경적 측면에서 큰 문제점으로 부각되고 있다. 따라서 폐 PET 병을 재활용하는 방법에 대한 연구는 환경 및 경제적 측면에서 중요하게 되었다. 폐 PET 병을 재활용하는 방법 중 시멘트 복합 재료의 보강 섬유로 사용하는 방법은 효과적인 방법 중에 하나이다. 본 연구에서는 시멘트 복합 재료의 소성 수축 균열에 재생 PET 섬유의 형상 및 길이의 효과를 얇은 슬래브 실험을 통해서 조사하였다. 실험 계획은 섬유의 형상, 길이 및 혼입률의 영향을 이해하기 위하여 수행하였다. 재생 PET섬유의 형상은 straight, crimped및 embossed type의 3가지 형상을 포함하며, 각 3가지 섬유형상 마다 3가지 수준의 섬유 혼입률 및 2가지 종류의 섬유 길이에 대해서 조사하였다. 실험 결과 재생 PET섬유는 시멘트 복합 재료의 소성 수축 균열에 효과적이었다. 섬유의 길이의 관점에서 길이가 긴 섬유는 섬유의 형상이 동일할 때 섬유체적비가 적을 때 효과적이며, 섬유체적비가 증가하면 길이가 짧은 섬유가 더욱더 효과적이었다. 또한 embossed type의 섬유는 적은 섬유 혼입률에서 다른 형상의 섬유보다 소성 수축 균열 제어 효과가 우수하였으며, 높은 섬유 혼입률에서는 straight type의 섬유가 다른 형상의 섬유보다 시멘트 복합 재료의 소성 수축 균열 제어에 가장 효과적이었다.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.283-288
• /
• 2006

A mathematical methodology is proposed for designing nozzle hole shapes producing controlled geometric cavitation. The proposed methodology uses an unstructured RANS flow solver, with the ability to compute sensitivity derivatives via an adjoint algorithm. The adjoint formulation for the N-S equations is presented while variation of the turbulence viscosity is not taken into account during the geometry modifications. The sensitivities are calculated in a mode independently of the shape parameterisation. The method is used to develop and evaluate conceptual shapes for nozzle hole cavitation reduction. The localized region at the hole inlet producing cavitation, is parameterised using its radius of curvature, while a cost function is formulated to eliminate the negative pressures present at this location. Sensitivity derivatives are used to assess the dependence of the localized region on the minimum pressure, and to drive the geometry to the targeted shape. The results show that the computer model can provide nozzle hole entry shapes that produce predefined flow characteristics, and thus can be used as an inverse design tool for nozzle hole cavitation control.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.339-345
• /
• 2007

본 논문에서는 등기하 해석법을 이용하여 평면 탄성문제의 변분식을 유도하였다. 등기하 해석법은 새로이 부각되고 있는 해석법으로서 기저 함수가 NURBS(Non-Uniform Rational B-Splines) 로부터 직접 생성되므로 해 공간은 CAD 모델을 구성하는 함수로써 표현된다. 또한 CAD 모델의 B-Spline 기저 함수를 직접 사용하므로 기하학적으로 엄밀한 형상을 표현할 수 있고 요소망의 재구성 없이 해석모델을 정밀화(Refinement)할 수 있는 강점이 있다. 본 논문에서는 이를 확장하여 연속체 기반의 애드조인트 설계 민감도 해석법을 사용하는 등기하 설계민감도 해석법을 유도하였다. 기존의 유한요소 기반형상 최적설계는 형상의 매개화에 어려움을 겪었으나 등기하 기반 최적설계에서는 기하학적 정보가 이미 B-spline 기저함수와 조정점에 포함되어 있으므로 이러한 어려움을 피할 수 있는 잠재력을 가지고 있다. 몇몇 수치 예제를 통해서 등기하 해석법을 사용한 설계 민감도 해석을 수행하였으며 유한차분 민감도와 비교하여 정확성을 확인하였다.