• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.73-81
• /
• 2014

This study dealt with the impacts of geometric structure on traffic accidents occurring on the interstates. There are standard values for the case of geometric structure which are recommended in the design guideline/policy; however, in the previous models, geometric variables were adapted as integrated ones as opposed to mixed ones in the real world so that derived models had a weakness to reflect the real. Therefore, using subdivided geometric variables, this study tried to derive the model which reflects the real world. In addition, by calculating elasticity, each variables' effect to the accidents are estimated. Hopefully, this study will help to establish the future guideline/policy of geometrics considering traffic safety.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.49-52
• /
• 2004

RADARSAT is one of many possible data sources that can play an important role in marine surveillance including ship detection because radar sensors have the two primary advantages: all-weather and day or night imaging. However, atmospheric effects on SAR imaging can not be bypassed and any remote sensing image has various geometric distortions. In this study, radiometric and geometric calibrations for RADARSAT/SAR data are tried using SGX products georeferenced as level 1. For radiometric calibration, information on the magnitude of the radar backscatter coefficient of the imaged terrain is extracted from the processed image data. Conversion method of the pixel DNs to beta nought and sigma nought is also investigated Finally, automatic geometric calibration based on the header file is compared to a marine chart.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.197-198
• /
• 2014

The concrete work of bridge decks is performed in a high place, which may reduce safety and productivity. In addition, the conventional method for deck forms require a great deal of manpower, and a form (sheathing) board is damaged when removed after curing. As a result, the concrete deck work of bridge construction becomes the cause of delayed construction and increased cost. To solve these problems, SMART form, a system form, is developed. SMART form is a temporary device for easier installation and removal, by mounting it to the lower flange of a bridge girder and using a mechanical behavior of the form system for deck concrete pouring. For stable installation and removal of the developed SMART form, geometric behaviors should be analyzed to prove its validity. Furthermore, the validity of geometric behaviors when the SMART form size is altered in response to the various arrangement of bridge girders should be proved. Thus, the study is intended to analyze the geometric validity of the form system for bridge deck concrete pouring. The structural stability of the form system for bridge deck concrete pouring can be secured, which will be applied in the field.

• Steel and Composite Structures
• /
• v.18 no.5
• /
• pp.1161-1176
• /
• 2015

The connection between a column and a beam is of particular importance to ensure the safety of civil engineering structures, such as high-rise buildings and bridges. While the connector must bear sufficient force for load transmission, increase of its ductility, toughness and damping may greatly enhance the overall safety of the structures. In this work, a composite beam-column connector is proposed and analyzed with the finite element method, including effects of elasticity, linear viscoelasticity, plasticity, as well as geometric nonlinearity. The composite connector consists of three parts: (1) soft steel; (2) polymer; and (3) conventional steel to be connected to beam and column. It is found that even in the linear range, the energy dissipation capacity of the composite connector is largely enhanced by the polymer material. Since the soft steel exhibits low yield stress and high ductility, hence under large deformation the soft steel has the plastic deformation to give rise to unique energy dissipation. With suitable geometric design, the connector may be tuned to exhibit different strengths and energy dissipation capabilities for real-world applications.

• Journal of the Korean Society of Safety
• /
• v.11 no.2
• /
• pp.79-88
• /
• 1996

A hypothetical accident in the containment vessel of liquid metal reactor could cause a pressure, temperature rise, and a strong aerosol release. The computer codes relating to the modelization of these accident make it necessary to use various input parameter, among which is the dynamic shape factor of aerosols produced. Combustion experiments of sodium spray fire carried out in a closed vessel, which was vertical cylinder made of 1.2m in diameter and 1.8m hight with a volume of 1.7$m^3$. The results of theoretical analysis presented here was compared to data obtained from experiments. The experimental results were summarized as follows. 1) The aerodynamic diameter and geometric diameter of aerosols are decreasing with increasing of injection pressure and injection temperature of sodium 2) The dynamic shape factor of aerosol is proportional to the aerodynamic diameter for a given particle. 3) The correspondence between the aerodynamic diameter and geometric diameter can be as $D_{ae}=0.70 D_{ge}$. 4) Peak pressure rose with increase in pressure and temperature of injection sodium, being more sensitive to the injection pressure than the injection temperature.

• 한국가스학회:학술대회논문집
• /
• 2003.05a
• /
• pp.165-172
• /
• 2003

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.97-105
• /
• 2011

This paper presents how one can investigate the effects on crash occurrence of freeway geometric design elements including the horizontal, vertical alignment and road environment. At present, the available research results for the most part involve geometric data analysis that are obtained along a relatively long section of freeway, and, because of the long section's diverse geometric conditions, the results tend to miss the specific local geometric impacts on vehicle crashes. In this regard, this research attempts to establish vehicle crash models based on a set of freeway geometric patterns whose crash generating characteristics are identical because they are homogeneous in terms of producing the same vehicle operating speeds, and subsequently their actual relationships are described by providing statistical analysis made in this research. Also each standard is comprised of part of straight, curve and continuous curve. This research has revealed that each type of model has different relation between accident and geometry structure. This research results should be useful for doing more reasonable highway designs and safety audit analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2393-2396
• /
• 2005

We present a method to detect on-road vehicle using geometric invariant of feature points on side planes of the vehicle. The vehicles are assumed into a set of planes and the invariant from motion information of features on the plane segments the plane from the theory that a geometric invariant value defined by five points on a plane is preserved under a projective transform. Harris corners as a salient image point are used to give motion information with the normalized correlation centered at these points. We define a probabilistic criterion to test the similarity of invariant values between sequential frames. Experimental results using images of real road scenes are presented.

• Structural Engineering and Mechanics
• /
• v.5 no.5
• /
• pp.541-552
• /
• 1997

In this paper the ultimate strength of the R/C cooling towers, which have initial imperfection and pre-cracked elements, is analyzed. The initial geometric imperfections arise from the unavoidable inaccuracies under the construction and the pre-cracks are assumed to be produced by the temperature stress gradients or cyclic loading under wind pressure and/or earthquake load. Both effects are strongly influenced on the strength of the R/C cooling tower shell structures. The reinforcing ratio is also the important factor to evaluate the ultimate strength of the R/C cooling tower shells. However we could not analyze these structures experimentally because of their large, analyses are the powerful schemes to evaluate the safety and reliability of these structures. The analyzed model is Port Gibson cooling tower shell. In the numerical analysis the geometric and material nonlinearities are taken into account.

• Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.55-60
• /
• 2003

Unstructured workspaces which are typical in construction contain unpredicable activities as well as changing environments. Most automated and semi-automated construction tasks require real-time information about the local workspace in the form of 3D geometric models. This paper describes and demonstrates a new rapid, local area geometric data extraction and 3D visualization method for unstructured construction workspaces that combines human perception, simple sensors, and descriptive CAD models. The rapid approach will be useful in construction in construction in order to optimize automated equipment tasks and to significantly improve safety and a remote operator's spatial perception of the workspace.