• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.743-752
• /
• 2021

The three-dimensional distribution of the fault was evaluated using gravity field interpretation such as curvature analysis and Euler deconvolution in the Seoul-Gyeonggi region where the Chugaryeong fault zone was developed. In addition, earthquakes that occurred after 2000 and the location of faults were compared. In Bouguer anomaly of Chugaryeong faults, the Pocheon Fault is an approximately 100 km fault that is extended from the northern part of Gyeonggi Province to the west coast through the central part of Seoul. Considering the frequency of epicenters is high, there is a possibility of an active fault. The Wangsukcheon Fault is divided into the northeast and southwest parts of Seoul, but it shows that the fault is connected underground in the bouguer anomaly. The magnitude 3.0 earthquake that occurred in Siheung city in 2010 occurred in an anticipated fault (aF) that developed in the north-south direction. In the western region of the Dongducheon Fault (≒5,500 m), the density boundary of the rock mass is deeper than that in the eastern region (≒4,000 m), suggesting that the tectonic movements of the western and eastern regions of the Dongducheon Fault is different. The maximum depth of the fracture zone developed in the Dongducheon Fault is about 6,500 m, and it is the deepest in the research area. It is estimated that the fracture zone extends to a depth of about 6,000 m for the Pocheon Fault, about 5,000 m for the Wangsukcheon Fault, and about 6,000 m for the Gyeonggang Fault.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2001.09a
• /
• pp.1-13
• /
• 2001

The role of geophysics in Environmental Earth Sciences and Engineering is considered. In the developing era since 60's in Japan, geophysics has mainly contributed to investigation of new constructions such as tunnels, dams and high-rise buildings. In the coming sustainable era, geophysics must be used for maintaining the safe and easy human life. Application examples of geophysics to investigations for disaster prevention, maintenance of existing constructions and soil and groundwater pollutions are presented to demonstrate their role in Environmental Geo-engineering. Future subjects in this field for geophysics and geophysicists are also discussed.

• Journal of Korean Society of societal Security
• /
• v.2 no.4
• /
• pp.43-48
• /
• 2009

During the past few years, Korea has experienced extraordinary floods, which have caused many damages of lives and properties. Flooding caused by typhoon is the most common disastrous phenomenon of nature among all catastrophes. As the average temperature of the earth has been increasing by global warming, the possibility of typhoon is also increased by abnormal climate changes. Along with the river improvement as a part of flood control, the time of concentration has been decreased, so the pick discharge has been increased. Moreover, with the land development activities, the area of storage has been diminishing, and the damages from inundation have been continuously increasing. There were a lot of damages to farmland in 1960's, industrial and public facilities in 1970's, and a lot of sufferings from the windstorm in 1980's. In 1990's, however, the amount of damages was increased substantially. So, there is need to decrease the number of the victims and loss of properties by applying preventive measures against natural calamities. This study has employed a simulation system to calculate the depth and amounts of inundation areas to forecast and prevent from flood damage by using rainfall-runoff model. In this study, a case study method is adopted to show inundation by using rainfall-runoff model, HEC-GeoRAS and Arcview. It is hoped that, this study would be conducive to professionals and organizations working in the field of disaster management.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.468-479
• /
• 2019

It is essential to comprehend coupled hydro-mechanical behavior to utilize subsurface for the recent demand for underground space usage. In this study, we developed a new simulator for numerical simulation as a tool for researching to consider the various domestic field and subsurface conditions. To develop the new module, we combined OpenGeoSys, one of the scientific software package that handles fluid mechanics (H), thermodynamics (T), and rock and soil mechanics (M) in the subsurface with FLAC3D, one of the commercial software for geotechnical engineering problems reinforced. In this simulator development, we design OpenGeoSys as a master and FLAC3D as a slave via a file-based sequential coupling. We have chosen Terzaghi's consolidation problem related to single-phase fluid flow at a saturated condition as a benchmark model to verify the proposed module. The comparative results between the analytical solution and numerical analysis showed a good agreement.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.491-504
• /
• 2020

Given the continued climate change and global warming, various technologies for greenhouse gas reduction were discussed worldwide as all 195 countries participated in the Paris Agreement on the reduction of greenhouse gases. The agreement was adopted at the 21st Conference of Parties to the UNFCCC (COP21), which was held in Paris, France, in December 2015, and it revealed that reducing CO₂ is the most efficient method of greenhouse gas reduction. Accordingly, carbon capture/utilization/storage (CCUS) technology has been noted as a means of making practical contributions to CO₂ reduction, and research and development (R&D) activities in many countries are active in the field of CCUS technology. Therefore, this study aims to provide a basis for CCUS R&D and strategic support measures by analyzing patent trends in technologies related to CCUS. The patent analysis collected a total of 10,137 patents in the United States, Korea, Japan, Europe, and China; the number of patents in the United States was the highest according to patent analysis by country. According to an analysis by technology, capture-related technology was high at 60%, but given the recent increase in technology related to utilization, technology demonstration, R&D, and policy support should be continued.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.3
• /
• pp.27-36
• /
• 2002

Generally, it is known that urethane injection is excellent in long-term durability and environment friendly for ground improvement. However, urethane grouting has short rise time thus the penetration distance from the injection point is so short. Therefore, urethane injection cannot be used for the site where requires ground improvement in deep location from the injection point. Other injection materials such as cement cannot be alternatives when rapid hardening is required. From this study, we improve disadvantage urethane injection by developing TAS method. From the field tests, it is ascertained that TAS increases injection distance over 10m, which is further than that of original urethane grouting. In addition, TAS has relatively short Rise-time compared to cement grouting thus instantaneous improvement can be mobilized right after the injection. Short Rise-time and long penetration distance provide excellent applicability for tunnel construction.

• Geomechanics and Engineering
• /
• v.19 no.5
• /
• pp.393-405
• /
• 2019

This paper evaluates the geotechnical and geo-engineering properties of the South Pars Zone (SPZ) marls in Assalouyeh, Iran. These marly beds mostly belong to the Aghajari and Mishan formations which entail the gray, cream, black, green, dark red and pink types. Marls can be observed as rock (soft rock) or soil. Marlstone outcrops show a relatively rapid change to soils in the presence of weathering. To geotechnically characterise the marls, field and laboratory experiments such as particle-size distribution, hydrometer, Atterberg limits, uniaxial compression, laboratory direct-shear, durability and carbonate content tests have been performed on soil and rock samples to investigate the physico-mechanical properties and behaviour of the SPZ marls in order to establish empirical relations between the geo-engineering features of the marls. Based on the experiments conducted on marly soils, the USCS classes of the marls is CL to CH which has a LL ranging from 32 to 57% and PL ranging from 18 to 27%. Mineralogical analyses of the samples revealed that the major clay minerals of the marls belong to the smectite or illite groups with low to moderate swelling activities. The geomechanical investigations revealed that the SPZ marls are classified as argillaceous lime, calcareous marl and marlstone (based on the carbonate content) which show variations in the geomechanical properties (i.e., with a cohesion ranging from 97 to 320 kPa and a friction angle ranging from 16 to 35 degrees). The results of the durability tests revealed that the degradation potential showed a wide variation from none to fully disintegrated. According to the results of the experiments, the studied marls have been classified as calcareous marl, marlstone and argillaceous lime due to the variations in the carbonate and clay contents. The results have shown that an increase in the carbonate content leads to a decrease in the degradation potential and an increase in the density and strength parameters such as durability and compressive strength. A comparison of the empirical relationships obtained from the regression analyses with similar studies revealed that the results obtained herein are reasonably reliable.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.6
• /
• pp.383-396
• /
• 2016

In this study, wave model was conducted on the presence or absence of water level changes and currents effects in coastal waters coexisting with waves and currents, then the results were compared. The flow field applied the results of the RIAMOM model and the wave model applied the SWAN model. Among ECMWF, NCEP and JMA, wind data applied JMA data sets which agreed well with the observed data comparatively. Numerical simulation was conducted for 8 months from January to August 2016. For each case, the deviation of wave height was calculated for the high wave of more than 2.5 m for comparison with observed data. As a result, the deviation of wave height was not significant both considering water level changes and currents effects or not at wave observation stations installed in deep waters. However, a significant deviation of wave height of 5~10% was obtained depending on water level changes and currents effects at the comparison point in shallow waters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.335-342
• /
• 2011

Geotechnical Information which had been constructing and offering by Minister of Land, Transport and Maritime Affairs (MLTM) has been target on the whole of country. Today, the 100,000 number of geotechnical data has been managed as 2d GIS database. But, it is difficult to apply this database for analyzing and designing geotechnical works. In this paper, we have developed Geotechnical Information Application System (GIAS) based 3d geo-spatial information technique for the effective uses. First, GIAS based on GIS framework was implemented to effectively find out spatial geologic structure of study area. Second, we invited some experts from each field and listened their opinions. According to the surveying on the applicability-ratio, the experts showed higher interest in this system. In this study, it was verified that the 3d GIS-based system was very useful for the usability-ratio.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.1
• /
• pp.35-42
• /
• 2019

Various development works inevitably increase cutting slopes due to land use, and many of trails managed by different authorities are being deteriorated by long-term weathering. Collapse of slopes causes unavoidable damage of property and loss of lives because of its uncertainty and difficulty in predicting its occurrence. In order to overcome the unavoidability, America, Japan, and several European nations analyze the kinetic energy and moving distance when rocks of upper slope move along the inclined plane, via field tests and computerized interpretation of the test results. Also, they are making efforts to develop measures with which the kinetic energy of the rocks moving along the slope is absorbed and fails to reach to specific structures. However, domestic researches just focus on fragmentary prediction of rockfall using existing programs, and there have been few approaches to identify interpretation methods appropriate for domestic cases or determination of parameters. In this context, we in this study defined rockfall types and affecting factors and analyzed effects of parameters using a general-purpose rockfall simulation program to understand principles of rockfall and to estimate effects of various parameters.