• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.729-732
• /
• 1998

ITU-T recommends T.120 for multimedia conferencing data protocols. In this paper, generic model of application protocols is shown for guaranteeting internetworking between application protocols in application users. And using generic conference control and multipoint communication service, multipoint binary file transfer application protocol is shown throughout application protocol generic model on public session environment.

• 제어로봇시스템학회논문지
• /
• 제7권3호
• /
• pp.263-268
• /
• 2001

A new control scheme s proposed for the control of reactive batch distillation (RBD) column. A nonlinear wave model captures the essential dynamic behavior of the RBD process. The proposed control scheme is based on both Generic Model Control(GNC) and nonlinear wave model. The control scheme uses a profile position of the column as a controlled variable. Ethanol esterification process using RBD is chosen as an example process. Tight control of the distillate purity is obtained with the use of the proposed control scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.673-675
• /
• 1995

A nonlinear process-model based control for main steam temperature control of a 100MW oil-fired drum-type fossil power plant is delveloped and its performances are compared to those of the conventional PID control. The process model for simulation is derived based "first priciple approach" and is validated in steady and transient conditions. The model is in good agreements with the field test data. Performances of the nonlinear PMBC for main steam temperature control are far superior to those of PID in all aspects for the disturbances of ramp increase in load and step change in fuel Btu value.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.380-387
• /
• 2011

In this paper, we considered the authoritative representation of Command and Fire Control System(CFCS) for the surface ship that was the engineering level model to develop system specifications and to analyze operational concepts on the concept design phase and to analyze military requirements, effectiveness and performance for the system. The engineering level model of CFCS can be used in simulation independently of the surface ship's type, and also it takes reuse, interoperability, and extension into consideration. The detailed sub-models, internal and external data interface, data flow among each sub-model, sensor and weapon models about the engineering level model of CFCS was defined. It was verified via engineering level simulations according to the V&V process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1013-1014
• /
• 2008

In this paper, we propose a new method of generating 3D face by using single frontal face image and 3D generic face model. By using active appearance model (AAM), the control points among facial feature points were localized in the 2D input face image. Then, the transform parameters of 3D generic face model were found to minimize the error between the 2D control points and the corresponding 2D points projected from 3D facial model. Finally, by using the obtained model parameters, 3D face was generated. We applied this 3D face to 3D game framework and found that the proposed method could make a realistic 3D face of game user.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.742-748
• /
• 1993

The dynamics and control of two complex column configurations (sidestream column with stripper; prcfractionater/sidestream column configuration), which are multivariable interacting and nonlinear, have been studied. A new control scheme developed by Hanand Park(1993) to deal with the nonlinear and multivariable nature of distillation processes has been applied to these complex distillation configurations. The control scheme incorporates a nonlinear wave model into a generic model control framework. An observer based on the nonlinear wave model is used to determine the profile positions of distillation column sections. The control scheme enables tight control of the profile position of each column section that leads to fast stabilization of product compositions.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.776-782
• /
• 1995

This paper presents a methodology for development of a heterarchical control system in Flexible Manufacturing Systems (FMS) environment. A Petri net based model is applied for development of control software. A real-time scheduling methodology for the heterarchical system is also developed and it is used as a software entity in the overall architecture. The partition of generic and specific modules in control software development is emphasized. The control system performs its control tasks in two stages: (1) generation of generic control code and distribution of them to each controller entity prior to system execution; (2) generation of specific control code according to job arrival and its process plan. The control software and the scheduling algorithm are evaluated by a simulation program.

• 산업경영시스템학회지
• /
• 제23권57호
• /
• pp.21-39
• /
• 2000

BOM(Bill of Materials) is a listing or description of raw materials, parts, and assemblies that define a product. In manufacturing companies that produce various products with short life cycles, it is very important to manage the BOM of products with various options and versions efficiently. BOM information should be required to share among the departments of engineering, production control, material purchasing, cost management, and shop floor within a manufacturing company. In order to share BOM information efficiently, information system based on WWW(World Wide Web) should be developed. Thus, this paper models and implements Web-based Generic BOM Management System (WGBMS) for management of a number of variant products which are consisted of standard parts under ATO(Assemble To Order) production environment. Also, object-oriented methodology was used to model a generic BOM and phases of navigational design and interface design were introduced to implement the prototype of WGBMS. And Object-Relational Database Management System (ORDBMS) was used to construct the WGBMS database.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.447-447
• /
• 2000

This paper proposes an Object-oriented model for Generic Equipment Model(GEM) which is applied to semiconductor processing Equipment. A proposed implementation model for GEM consists of three modules : a module to convert SECS-II message and a module to transmit messages between GEM and a physical equipment. The proposed Object-oriented model for GEM has advantages in reuse and user management from the point of view of development program. Especially, this paper proposes a GEM agent COM, which is a base of GEM, transmits messages and events among modules. This Object-oriented model is analysed and developed by using UML.

• 항공우주시스템공학회지
• /
• 제18권4호
• /
• pp.18-26
• /
• 2024

본 논문은 Generic 쿼드 틸트 로터 UAM 항공기 비행 동력학 기반 비선형 수학적 모델링 및 실시간 시뮬레이션 소프트웨어 개발에 관한 연구 결과를 기술한다. 본 연구에서는 NASA의 UAM 임무 형상 및 요구도를 참고하여 Generic 쿼트 틸트 로터 eVTOL UAM 항공기 형상을 설계하고, 공력 데이터베이스 기반 공기역학, 추력 데이터베이스 기반 프롭로터역학, 항공기의 지면반력, 대기환경을 운동모델로 모델링하였다. 또한 회전익 모드, 천이 모드 및 고정익 모드 별 조종방법을 정의, 나셀 틸트각 Corridor 설정 후 실시간 비행 시뮬레이션 소프트웨어에 구현 후 수평비행 트림 해석을 수행하였다. 본 실시간 비행 시뮬레이션 소프트웨어를 통해 쿼드 틸트 로터 UAM 항공기의 트림 해석뿐 아니라 조종성(Handling Qualities) 예측, 동특성을 고려한 나셀 틸트각 스케줄러 최적화와 회전익, 고정익 및 천이 모드 별 비행 제어법칙 설계/검증 및 비행 시뮬레이터 탑재를 통한 비행 훈련 등 쿼트 틸트 로터 UAM 분야에서 다양한 목적으로 활용 가능할 것으로 예상한다.