• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.729-732
• /
• 1998

ITU-T recommends T.120 for multimedia conferencing data protocols. In this paper, generic model of application protocols is shown for guaranteeting internetworking between application protocols in application users. And using generic conference control and multipoint communication service, multipoint binary file transfer application protocol is shown throughout application protocol generic model on public session environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.3
• /
• pp.263-268
• /
• 2001

A new control scheme s proposed for the control of reactive batch distillation (RBD) column. A nonlinear wave model captures the essential dynamic behavior of the RBD process. The proposed control scheme is based on both Generic Model Control(GNC) and nonlinear wave model. The control scheme uses a profile position of the column as a controlled variable. Ethanol esterification process using RBD is chosen as an example process. Tight control of the distillate purity is obtained with the use of the proposed control scheme.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.673-675
• /
• 1995

A nonlinear process-model based control for main steam temperature control of a 100MW oil-fired drum-type fossil power plant is delveloped and its performances are compared to those of the conventional PID control. The process model for simulation is derived based "first priciple approach" and is validated in steady and transient conditions. The model is in good agreements with the field test data. Performances of the nonlinear PMBC for main steam temperature control are far superior to those of PID in all aspects for the disturbances of ramp increase in load and step change in fuel Btu value.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.380-387
• /
• 2011

In this paper, we considered the authoritative representation of Command and Fire Control System(CFCS) for the surface ship that was the engineering level model to develop system specifications and to analyze operational concepts on the concept design phase and to analyze military requirements, effectiveness and performance for the system. The engineering level model of CFCS can be used in simulation independently of the surface ship's type, and also it takes reuse, interoperability, and extension into consideration. The detailed sub-models, internal and external data interface, data flow among each sub-model, sensor and weapon models about the engineering level model of CFCS was defined. It was verified via engineering level simulations according to the V&V process.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1013-1014
• /
• 2008

In this paper, we propose a new method of generating 3D face by using single frontal face image and 3D generic face model. By using active appearance model (AAM), the control points among facial feature points were localized in the 2D input face image. Then, the transform parameters of 3D generic face model were found to minimize the error between the 2D control points and the corresponding 2D points projected from 3D facial model. Finally, by using the obtained model parameters, 3D face was generated. We applied this 3D face to 3D game framework and found that the proposed method could make a realistic 3D face of game user.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.742-748
• /
• 1993

The dynamics and control of two complex column configurations (sidestream column with stripper; prcfractionater/sidestream column configuration), which are multivariable interacting and nonlinear, have been studied. A new control scheme developed by Hanand Park(1993) to deal with the nonlinear and multivariable nature of distillation processes has been applied to these complex distillation configurations. The control scheme incorporates a nonlinear wave model into a generic model control framework. An observer based on the nonlinear wave model is used to determine the profile positions of distillation column sections. The control scheme enables tight control of the profile position of each column section that leads to fast stabilization of product compositions.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.776-782
• /
• 1995

This paper presents a methodology for development of a heterarchical control system in Flexible Manufacturing Systems (FMS) environment. A Petri net based model is applied for development of control software. A real-time scheduling methodology for the heterarchical system is also developed and it is used as a software entity in the overall architecture. The partition of generic and specific modules in control software development is emphasized. The control system performs its control tasks in two stages: (1) generation of generic control code and distribution of them to each controller entity prior to system execution; (2) generation of specific control code according to job arrival and its process plan. The control software and the scheduling algorithm are evaluated by a simulation program.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.21-39
• /
• 2000

BOM(Bill of Materials) is a listing or description of raw materials, parts, and assemblies that define a product. In manufacturing companies that produce various products with short life cycles, it is very important to manage the BOM of products with various options and versions efficiently. BOM information should be required to share among the departments of engineering, production control, material purchasing, cost management, and shop floor within a manufacturing company. In order to share BOM information efficiently, information system based on WWW(World Wide Web) should be developed. Thus, this paper models and implements Web-based Generic BOM Management System (WGBMS) for management of a number of variant products which are consisted of standard parts under ATO(Assemble To Order) production environment. Also, object-oriented methodology was used to model a generic BOM and phases of navigational design and interface design were introduced to implement the prototype of WGBMS. And Object-Relational Database Management System (ORDBMS) was used to construct the WGBMS database.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.447-447
• /
• 2000

This paper proposes an Object-oriented model for Generic Equipment Model(GEM) which is applied to semiconductor processing Equipment. A proposed implementation model for GEM consists of three modules : a module to convert SECS-II message and a module to transmit messages between GEM and a physical equipment. The proposed Object-oriented model for GEM has advantages in reuse and user management from the point of view of development program. Especially, this paper proposes a GEM agent COM, which is a base of GEM, transmits messages and events among modules. This Object-oriented model is analysed and developed by using UML.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.18-26
• /
• 2024

This paper describes the results of a study on Generic Quad Tilt Rotor UAM aircraft, focusing on nonlinear mathematical modeling and the development of real-time simulation software. In this research, we designed a configuration for a Generic Quad Tilt Rotor eVTOL UAM aircraft based on NASA's UAM mission requirements. We modeled the aerodynamics using a database, the prop-rotor dynamics with a thrust database, and included a ground reaction and atmospheric model in the flight model. We defined the control concept for various modes(helicopter mode, transition mode, and airplane mode), derived tilt angle corridors, and formulated flight control requirements. The resultant real-time flight simulation software not only performs trim analysis for Tilt Rotor UAM aircraft but also predicts handling qualities, optimizes tilt angle scheduling based on dynamic characteristics, designs and validates flight control laws for helicopter, transition, and airplane modes, and facilitates flight training through simulator integration.